On Sunday 05 July 2009 13:17:54 Andrey Gusev wrote:
> On Wed, 10 Jun 2009 13:44:29 +0200
> Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote:
>
> > On Tuesday 09 June 2009 01:26:27 Benjamin Herrenschmidt wrote:
> > > On Mon, 2009-06-08 at 22:20 +0200, Bartlomiej Zolnierkiewicz wrote:
> > >
> > > > > [ 70.584122] hdb:<3>ide-pmac lost interrupt, dma status: 8480
> > > >
> > > > DMA status indicates that DMA transfer is still active according
> > > > to the controller. This one is really a platform/hardware
> > > > specific issue.
> > >
> > > I've partially missed that thread. Is the a bugzilla entry or
> >
> > There is no bugzilla entry currently so please check mailing list
> > archives for previous discussion.
> >
> > > something ? Is this a regression ?
> >
> > At least not a recent one (it happens since at least 2.6.24).
> >
>
> Delay is fixed itself in 2.6.31-rc2. Most likely it was platform specific issue. But lost interrupt still exists.
> There is log of 2.6.31-rc2:
Thanks for letting us know. When it comes to the lost interrupt issue
I still suspect that this is pmac specific problem (though Dave may have
some fresh idea about it).
> [ 1.595268] MacIO PCI driver attached to Keylargo chipset
> [ 1.597024] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
> [ 1.597988] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
> [ 1.598024] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
> [ 1.598365] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
> [ 1.598401] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
> [ 1.598762] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
> [ 1.598797] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
> [ 1.599264] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
> [ 1.599300] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
> [ 1.601336] Uniform Multi-Platform E-IDE driver
> [ 1.602201] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
> [ 2.630651] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
> [ 2.630767] Probing IDE interface ide0...
> [ 2.930834] hda: IBM-IC35L060AVVA07-0, ATA DISK drive
> [ 3.290646] hdb: QUANTUM FIREBALLP LM20.5, ATA DISK drive
> [ 3.291087] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [ 3.291264] hda: UDMA/100 mode selected
> [ 3.291473] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [ 3.291720] hdb: UDMA/66 mode selected
> [ 3.292118] ide0 at 0xf10c2000-0xf10c2070,0xf10c2160 on irq 39
> [ 4.320649] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
> [ 4.320753] Probing IDE interface ide1...
> [ 4.921004] ide1 at 0xf10ba000-0xf10ba070,0xf10ba160 on irq 19
> [ 5.950647] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20
> [ 5.950743] Probing IDE interface ide2...
> [ 6.370828] hde: PHILIPS CDD5101, ATAPI CD/DVD-ROM drive
> [ 6.730948] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [ 6.731332] hde: MWDMA2 mode selected
> [ 6.731832] ide2 at 0xf10be000-0xf10be070,0xf10be160 on irq 20
> [ 6.732558] ide-gd driver 1.18
> [ 6.732735] hda: max request size: 128KiB
> [ 6.763392] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63
> [ 6.763741] hda: cache flushes supported
> [ 6.764277] hda: [mac] hda1 hda2 hda3 hda4
> [ 6.770469] hdb: max request size: 128KiB
> [ 6.803427] hdb: Host Protected Area detected.
> [ 6.803431] current capacity is 40130390 sectors (20546 MB)
> [ 6.803435] native capacity is 40132503 sectors (20547 MB)
> [ 6.803590] hdb: 40130390 sectors (20546 MB) w/1900KiB Cache, CHS=39811/16/63
> [ 6.803684] hdb: cache flushes not supported
> [ 6.803910] hdb:
> [ 26.800743] ide-pmac lost interrupt, dma status: 8480
> [ 26.800809] hdb: lost interrupt
> [ 26.800850] hdb: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
> [ 26.800976] hdb: possibly failed opcode: 0xc8
> [ 26.803449] hda: DMA disabled
> [ 26.805664] hdb: DMA disabled
> [ 26.900633] ide0: reset: success
> [ 26.949147] hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
> [ 27.007890] ide-cd driver 5.00
> [ 27.011728] ide-cd: hde: ATAPI 32X DVD-ROM CD-R/RW drive, 8192kB Cache
> [ 27.014163] Uniform CD-ROM driver Revision: 3.20
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
