Linux IDE Archive
[Prev Page][Next Page]
- Re: [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
- Re: [PATCH #upstream] ahci: misc cleanups for EM stuff
- Re: [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
- Re[2]: Delay on intialization ide subsystem(most likely)
- Re: [PATCH] m68k: Atari - leave out spurious request_irq for Falcon IDE
- Re: [GIT PATCH linux-2.6-block#for-linus] block: fix hd and mg_disk
- [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
- [PATCH 1/3] mg_disk: fix locking
- [GIT PATCH linux-2.6-block#for-linus] block: fix hd and mg_disk
- [PATCH 3/3] hd: fix locking
- [PATCH #upstream] ahci: misc cleanups for EM stuff
- Re: Delay on intialization ide subsystem(most likely)
- From: Bartlomiej Zolnierkiewicz
- Re: Delay on intialization ide subsystem(most likely)
- [PATCH] alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
- [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
- Re: [PATCH] Fix Trivial Warnining in drivers/ata/libata-scsi.c
- Re: [PATCH] Fix Trivial Warnining in drivers/ata/libata-scsi.c
- [PATCH] Fix Trivial Warnining in drivers/ata/libata-scsi.c
- Re: [PATCH] libata: fix suspend/resume for ATA SEMB devices
- Re: Delay on intialization ide subsystem(most likely)
- [PATCH] libata: fix suspend/resume for ATA SEMB devices
- Re: [PATCH 2/3] mg_disk: fix dependency on libata
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/3] mg_disk: fix dependency on libata
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/3] mg_disk: fix dependency on libata
- Re: [PATCH 2/3] mg_disk: fix dependency on libata
- Re: [PATCH 3/3] mg_disk: use defines from <linux/ata.h>
- Re: [PATCH 2/3] mg_disk: fix dependency on libata
- Re: [PATCH 2/3] mg_disk: fix dependency on libata
- Re: [PATCH] MAINTAINERS: update IDE entry
- Re: Errors on ICH10R with Seagate HDDs
- [Bug 13120] BUG: using rootfstype=ext4 causes oops
- [Bug 13120] BUG: using rootfstype=ext4 causes oops
- Re: Delay on intialization ide subsystem(most likely)
- From: Bartlomiej Zolnierkiewicz
- Delay on intialization ide subsystem(most likely)
- Re: Errors on ICH10R with Seagate HDDs
- Re: [PATCH] MAINTAINERS: update IDE entry
- Re: Stop disks on reboot for laptop which cuts power
- Re: Implementing NVMHCI...
- Re: ATA taskfile register returns 0xd0 on resume.
- Re: [PATCH] MAINTAINERS: update IDE entry
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] MAINTAINERS: update IDE entry
- Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
- [PATCH] ata_piix: ICH7 does not support correct MWDMA timings
- Re: [PATCH 8 of 9] libata: Report disk alignment and physical block size
- Re: [PATCH 9 of 9] libata: Media rotation rate and form factor heuristics
- Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
- Re: [patch] Enable parallel scan on ata_piix
- Re: [patch] Enable parallel scan on ata_piix
- Re: [patch] Enable parallel scan on ata_piix
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] MAINTAINERS: update IDE entry
- From: Bartlomiej Zolnierkiewicz
- Re: [patch] Enable parallel scan on ata_piix
- Re: [PATCH] MAINTAINERS: update IDE entry
- Re: [PATCH 7 of 9] scsi_debug: Add support for physical block exponent and alignment
- Re: [PATCH 7 of 9] scsi_debug: Add support for physical block exponent and alignment
- [PATCH 9 of 9] libata: Media rotation rate and form factor heuristics
- [PATCH 7 of 9] scsi_debug: Add support for physical block exponent and alignment
- [PATCH 8 of 9] libata: Report disk alignment and physical block size
- [PATCH 5 of 9] sd: Detect non-rotational devices
- [PATCH 6 of 9] sd: Block limits VPD support
- [PATCH 3 of 9] MD: Use new topology calls to indicate alignment and I/O sizes
- [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
- [PATCH 4 of 9] sd: Physical block size and alignment support
- [PATCH 1 of 9] block: Expose stacked device queues in sysfs
- [PATCH 0 of 9] I/O topology patch kit
- [patch] Enable parallel scan on ata_piix
- ATA taskfile register returns 0xd0 on resume.
- Re: Frequent Head Unload Problem
- [git pull] IDE fixes (updated)
- From: Bartlomiej Zolnierkiewicz
- [PATCH] MAINTAINERS: update IDE entry
- From: Bartlomiej Zolnierkiewicz
- [PATCH] palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
- From: Bartlomiej Zolnierkiewicz
- Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 4 of 8] sd: Physical block size and alignment support
- Re: [PATCH 4 of 8] sd: Physical block size and alignment support
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH 4 of 8] sd: Physical block size and alignment support
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 4 of 8] sd: Physical block size and alignment support
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 8 of 8] libata: Report disk alignment and physical block size
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 8 of 8] libata: Report disk alignment and physical block size
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [git pull] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH 5 of 8] sd: Detect non-rotational devices
- Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
- Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
- [PATCH 8 of 8] libata: Report disk alignment and physical block size
- [PATCH 6 of 8] sd: Block limits VPD support
- [PATCH 4 of 8] sd: Physical block size and alignment support
- [PATCH 3 of 8] MD: Use new topology calls to indicate alignment and I/O sizes
- [PATCH 7 of 8] scsi_debug: Add support for physical block exponent and alignment
- [PATCH 1 of 8] block: Expose stacked device queues in sysfs
- [PATCH 5 of 8] sd: Detect non-rotational devices
- [PATCH 0 of 8] I/O topology patch kit
- [PATCH #upstream-fixes] libata: clear ering on resume
- Re: [git pull] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- Re: [git pull] IDE fixes
- Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
- Re: [git pull] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- From: Bartlomiej Zolnierkiewicz
- Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- Re: [git pull] IDE fixes
- Re: [git pull] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [git pull] IDE fixes
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [git pull] IDE fixes
- [git pull] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] ide: Stop disks on reboot for laptop which cuts power
- From: Bartlomiej Zolnierkiewicz
- Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH] sata_mv: use new sata phy register settings for new devices
- Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
- Re: [PATCH 4/6] PalmLD IDE
- Re: [PATCH 4/6] PalmLD IDE
- Re: [BUILD FAILURE 07/12] Next April 14 : PPC64 randconfig [drivers/ide/pmac.c]
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 4/6] PalmLD IDE
- Re: [PATCH #ide-phase2] ide-dma: don't reset request fields on dma_timeout_retry()
- Re: sata_promise: Keeps saying SATA link down (SStatus 0 SControl 0)
- Re: [PATCH 4/6] PalmLD IDE
- Re: [PATCH 4/6] PalmLD IDE
- Re: [PATCH 4/6] PalmLD IDE
- Re: [PATCH 4/6] PalmLD IDE
- Re: Is sata_nv compatible with async scsi scan?
- Re: [PATCH #ide-phase2] ide-dma: don't reset request fields on dma_timeout_retry()
- From: Bartlomiej Zolnierkiewicz
- Re: Is sata_nv compatible with async scsi scan?
- Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- Re: Is sata_nv compatible with async scsi scan?
- Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- Re: sata_promise: Keeps saying SATA link down (SStatus 0 SControl 0)
- Is sata_nv compatible with async scsi scan?
- Re: [GIT PATCH pata-2.6] ide: clean up ide-tape, take#2
- Re: [PATCH 4/6] PalmLD IDE
- [PATCH #ide-phase2] ide-dma: don't reset request fields on dma_timeout_retry()
- [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
- [patch 2.6.30-rc2 1/2] palm_bk3710: those registers/bitfields don't exist
- Re: [PATCH 4/6] PalmLD IDE
- Re: [PATCH 4/6] PalmLD IDE
- Re: [PATCH 4/6] PalmLD IDE
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 4/6] PalmLD IDE
- Re: [PATCH 4/6] PalmLD IDE
- From: Bartlomiej Zolnierkiewicz
- Re: sata_promise: Keeps saying SATA link down (SStatus 0 SControl 0)
- Re: Fw: [PATCH] ahci: add ACard 8620 support (rough draft)
- Re: [PATCH 07/10] ide-tape: use byte size instead of sectors on rw issue functions
- Re: [PATCH 06/10] ide-tape: unify r/w init paths
- Re: [GIT PATCH pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2
- Re: [GIT PATCH pata-2.6] ide: clean up ide-tape, take#2
- From: Bartlomiej Zolnierkiewicz
- Re: [GIT PATCH pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2
- From: Bartlomiej Zolnierkiewicz
- Re: [bug#12874] Seagate STT20000A no longer works
- Re: [PATCH 1/2] ide: Stop disks on reboot for laptop which cuts power
- Re: [PATCH 1/2] ide: Stop disks on reboot for laptop which cuts power
- Re: [PATCH 1/2] ide: Stop disks on reboot for laptop which cuts power
- Re: Question about ALPM, HIPM and DIPM
- [Bug 13138] New: CPU Stalls When Probing IDE Interfaces
- [PATCH] mv-ahci: add other Marvell AHCI PCI IDs
- Re: [PATCH 0/2] Putting bio_list into struct request?
- [PATCH 2/2] Fix bugs found during bio_list update
- Re: [PATCH 4/6] PalmLD IDE
- [PATCH 1/2] Update struct request to use bio_list
- [PATCH 0/2] Putting bio_list into struct request?
- [PATCH] mv-ahci: add set-mode, cable id functions
- Re: [PATCH 12/15] ide-cd: convert to using generic sense request
- Re: [PATCH 12/15] ide-cd: convert to using generic sense request
- Re: [PATCH 12/15] ide-cd: convert to using generic sense request
- Re: PMPs
- Re: Errors on ICH10R with Seagate HDDs
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- [PATCH 02/10] ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
- [PATCH 04/10] ide-tape: use standard data transfer mechanism
- [PATCH 10/10] ide: drop rq->data handling from ide_map_sg()
- [PATCH 09/10] ide-atapi: kill unused fields and callbacks
- [PATCH 08/10] ide-tape: simplify read/write functions
- [PATCH 07/10] ide-tape: use byte size instead of sectors on rw issue functions
- [PATCH 05/10] ide-tape: kill idetape_bh
- [PATCH 06/10] ide-tape: unify r/w init paths
- [PATCH 03/10] ide-tape: use single continuous buffer
- [GIT PATCH pata-2.6] ide: clean up ide-tape, take#2
- [PATCH 01/10] ide-tape,floppy: fix failed command completion after request sense
- [GIT PATCH pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- [PATCH/RFC 09/16] m68k: amiga - Amiga Gayle IDE platform device conversion
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2
- From: Bartlomiej Zolnierkiewicz
- [git pull] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/2] ide: Stop disks on reboot for laptop which cuts power
- [PATCH 2/2] sd: Stop disks on reboot for laptop which cuts power
- [PATCH 0/2] Stop disks on reboot for laptop which cuts power
- Re: [PATCH libata: add SSD detection hueristic; move SSD setup to ata_dev_configure (was Re: [GIT PULL] Ext3 latency fixes)
- Re: Frequent Head Unload Problem
- Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- [git patches] libata fixes
- Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- libata git repo guide (was Re: [PATCH 01/02] sata_mv: tidy up qc->tf usage in qc_prep() functions)
- Re: Implementing NVMHCI...
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- Re: [PATCH 1/5] Block: Discard may need to allocate pages
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- Re: [PATCH 5/5] libata: Add support for TRIM
- Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
- Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
- Re: PMPs
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- From: Bartlomiej Zolnierkiewicz
- Re: Frequent Head Unload Problem
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- From: Benjamin Herrenschmidt
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- Re: [PATCH] v3 fix error on drivers/ata/pata_legacy.c
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- Re: [PATCH] v3 fix error on drivers/ata/pata_legacy.c
- Re: [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- [PATCH] pata_via: Cache and rewrite the device bit
- Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
- [PATCH 11/15] ide: add helpers for preparing sense requests
- [PATCH 12/15] ide-cd: convert to using generic sense request
- [PATCH 13/15] ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
- [PATCH 14/15] ide-cd,atapi: use bio for internal commands
- [PATCH 15/15] ide-pm: don't abuse rq->data
- [PATCH 09/15] ide-atapi: don't abuse rq->buffer
- [PATCH 10/15] ide-cd: don't abuse rq->buffer
- [PATCH 07/15] ide-floppy: block pc always uses bio
- [PATCH 08/15] ide-taskfile: don't abuse rq->buffer
- [PATCH 06/15] ide-cd: clear sense buffer before issuing request sense
- [PATCH 05/15] ide kill unused ide_cmd->special
- [PATCH 03/15] ide: use blk_run_queue() instead of blk_start_queueing()
- [PATCH 04/15] ide: don't set REQ_SOFTBARRIER
- [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups, take#2
- [PATCH 02/15] ide-tape: remove back-to-back REQUEST_SENSE detection
- [PATCH 01/15] block: clear req->errors on bio completion only for fs requests
- Re: Errors on ICH10R with Seagate HDDs
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- From: Benjamin Herrenschmidt
- [PATCH] v3 fix error on drivers/ata/pata_legacy.c
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- From: Roderick Colenbrander
- Next April 17: x86 allmodconfig drivers/ata failure
- [PATCH]v2 fix error on drivers/ata/pata_legacy.c
- [PATCH] fix error on drivers/ata/pata_legacy.c
- [PATCH 3/3] acard-ahci: Add new ACard ATP AHCI driver
- [PATCH 2/3] mv-ahci: Add Marvell PATA support
- [PATCH 1/3] ahci: move core code into new libahci module
- [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
- [Bug 13120] BUG: using rootfstype=ext4 causes oops
- [Bug 13120] New: BUG: using rootfstype=ext4 causes oops
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- From: Roderick Colenbrander
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- Re: [git patches] libata fixes
- Re: [PATCH 5/5] libata: Add support for TRIM
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- [git patches] libata fixes
- Re: RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] hpt366: use ATA_DMA_* constants
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] hpt366: fix HPT370 DMA timeouts
- From: Bartlomiej Zolnierkiewicz
- Re: [PROPOSAL] ata: Report 16/32bit PIO as best we can
- Re: [PATCH] sata_sil: enable 32-bit PIO
- Re: [PATCH] libata: use ATA_ID_CFA_*
- Re: [PATCH #upstream-fixes] pata_legacy: fix no device fail path
- Re: [PATCH] pata_hpt37x: fix HPT370 DMA timeouts
- Re: [PATCH UPDATED #upstream-fixes] libata: handle SEMB signature better
- Re: LSF Papers online?
- Re: LSF Papers online?
- Re: LSF Papers online?
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH UPDATED #upstream-fixes] libata: handle SEMB signature better
- Re: LSF Papers online?
- Question about ALPM, HIPM and DIPM
- Re: Frequent Head Unload Problem
- Re: Frequent Head Unload Problem
- Re: LSF Papers online?
- RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems
- From: Roderick Colenbrander
- Re: LSF Papers online?
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_hpt37x: fix HPT370 DMA timeouts
- Re: LSF Papers online?
- Re: LSF Papers online?
- Re: [PATCH] sata_sx4: speed up ECC initialization
- Re: Implementing NVMHCI...
- Re: LSF Papers online?
- RE: [PATCH RFC] ahci: implement handoff quirk
- Re: LSF Papers online?
- Re: Frequent Head Unload Problem
- Re: LSF Papers online?
- Re: LSF Papers online?
- Re: LSF Papers online?
- From: Bartlomiej Zolnierkiewicz
- Re: [bug#12874] Seagate STT20000A no longer works
- Re: [bug#12874] Seagate STT20000A no longer works
- [PATCH UPDATED #upstream-fixes] libata: handle SEMB signature better
- Re: [PATCH #upstream-fixes] libata: handle SEMB signature better
- Re: [PATCH #upstream-fixes] libata: handle SEMB signature better
- Re: [PATCH] sata_sx4: speed up ECC initialization
- From: Alexander Beregalov
- Re: PDC20375 info, need help
- Re: [PATCH] sata_sx4: speed up ECC initialization
- Re: [BUILD FAILURE 07/12] Next April 14 : PPC64 randconfig [drivers/ide/pmac.c]
- Re: [PATCH] sata_sx4: speed up ECC initialization
- From: Alexander Beregalov
- [BUILD FAILURE 07/12] Next April 14 : PPC64 randconfig [drivers/ide/pmac.c]
- Frequent Head Unload Problem
- Re: LSF Papers online?
- Re: [PATCH] pata_hpt37x: fix HPT370 DMA timeouts
- Re: [PATCH] pata_hpt37x: fix HPT370 DMA timeouts
- Re: LSF Papers online?
- Re: LSF Papers online?
- From: Bartlomiej Zolnierkiewicz
- [PATCH] pata_hpt37x: fix HPT370 DMA timeouts
- Re: Implementing NVMHCI...
- Re: [PATCH #upstream-fixes] libata: handle SEMB signature better
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- From: Szabolcs Szakacsits
- Re: [PATCH] sata_sx4: speed up ECC initialization
- Re: Implementing NVMHCI...
- Re: PMPs
- Re: Problems with >3 drives on an eSATA portmultiplier
- Re: Implementing NVMHCI...
- [PATCH #upstream-fixes] libata: handle SEMB signature better
- Re: Implementing NVMHCI...
- Re: LSF Papers online?
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: [PATCH RFC] ahci: implement handoff quirk
- Re: [PATCH RFC] ahci: implement handoff quirk
- Re: Implementing NVMHCI...
- [Bug 13086] pata_via can't initialize 2nd HDD on VIA VX800 chipsets (problem in via_tf_load)
- [Bug 13086] New: pata_via can't initialize 2nd HDD on VIA VX800 chipsets (problem in via_tf_load)
- [PATCH] sata_sil: enable 32-bit PIO
- [PATCH #upstream-fixes] pata_legacy: fix no device fail path
- Re: Fw: [PATCH] ahci: add ACard 8620 support (rough draft)
- Re: Fw: [PATCH] ahci: add ACard 8620 support (rough draft)
- [PATCH] sata_sx4: speed up ECC initialization
- From: Alexander Beregalov
- Re: libata errors
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- [PATCH] libata: use ATA_ID_CFA_*
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PATCH] sata_nv: sgpio for nvidia mcp55 -v3
- Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- Re: Implementing NVMHCI...
- Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
- [PATCH 01/02] sata_mv: tidy up qc->tf usage in qc_prep() functions
- Re: Implementing NVMHCI...
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
- Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
- Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
- Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
- Re: Fw: [PATCH] ahci: add ACard 8620 support (rough draft)
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: Implementing NVMHCI...
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
- Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
- Re: libata errors
- [git patches] libata fixes
- Re: libata errors
- Re: v2.6.25: WARNING: at kernel/lockdep.c:2437 __lock_acquire+0xc69/0xfa0()
- Re: [PATCH] sata_sx4: refresh and convert to new EH
- Re: [PATCH 14/14] ide-cd: use bio for request sense
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
- Re: [PATCH #upstream-fixes] ahci: force CAP_NCQ for earlier NV MCPs
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
- Re: [PATCH] sata_nv: sgpio for nvidia mcp55 -v3
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
- Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
- Re: [PATCH] sata_mv: use new sata phy register settings for new devices
- Re: [PATCH] sata_mv: use new sata phy register settings for new devices
- Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
- Re: Implementing NVMHCI...
- Re: [PATCH] sata_sx4: refresh and convert to new EH
- From: Alexander Beregalov
- Re: Implementing NVMHCI...
- Re: [PATCH 0/3] libahci and friends
- [PATCH 0/3] libahci and friends
- Re: Implementing NVMHCI...
- [PATCH 3/3] New 'acard-ahci' driver for Acard ATP8620 support
- Re: Implementing NVMHCI...
- [PATCH 2/3] mv-ahci: Add PATA support
- [PATCH 1/3] Create libahci. Move Marvell support to mv-ahci.
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- From: Szabolcs Szakacsits
- Re: Implementing NVMHCI...
- Re: [PATCH] libata-core More robust parsing for multi_count(v5)
- Re: Implementing NVMHCI...
- Re: [PATCH] libata-core More robust parsing for multi_count(v5)
- Re: [PATCH] libata-core More robust parsing for multi_count(v5)
- Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
- Re: Implementing NVMHCI...
- Re: [PATCH] sata_sx4: refresh and convert to new EH
- RE: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: [PATCH] sata_sx4: refresh and convert to new EH
- From: Alexander Beregalov
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: [PATCH] sata_mv: use new sata phy register settings for new devices
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: sata_sil & pmp ?
- Re: [PATCH RFC] ahci: implement handoff quirk
- Re: libata errors
- Re: [PATCH RFC] ahci: implement handoff quirk
- Implementing NVMHCI...
- Re: [PATCH RFC] ahci: implement handoff quirk
- Re: v2.6.25: WARNING: at kernel/lockdep.c:2437 __lock_acquire+0xc69/0xfa0()
- [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
- [PATCH] sata_mv: use new sata phy register settings for new devices
- RE: Odd RAID failure
- [bug#12874] Seagate STT20000A no longer works
- Re: Odd RAID failure
- [Bug 12874] Seagate STT20000A no longer works
- sata_sil & pmp ?
- [Bug 12874] Seagate STT20000A no longer works
- [Bug 12874] Seagate STT20000A no longer works
- [Bug 12874] Seagate STT20000A no longer works
- [Bug 12874] Seagate STT20000A no longer works
- [Bug 12874] Seagate STT20000A no longer works
- RE: Odd RAID failure
- RE: Odd RAID failure
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: Odd RAID failure
- Re: Odd RAID failure
- Re: Bug 453808 - qc timeout probing TEAC DV-28E-V CD/DVD drive on SATA/PATA bridge
- Re: [PATCH libata: add SSD detection hueristic; move SSD setup to ata_dev_configure (was Re: [GIT PULL] Ext3 latency fixes)
- Re: Odd RAID failure
- Re: Errors on ICH10R with Seagate HDDs
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- [PROPOSAL] ata: Report 16/32bit PIO as best we can
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PATCH 13/14] lemote: fixup for FUJITSU disk
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
- [PATCH] hpt366: use ATA_DMA_* constants
- [PROPOSED] ata: Report 16/32bit PIO as best we can
- Re: [PATCH 13/14] lemote: fixup for FUJITSU disk
- Re: 32-bit IO to-do item...
- Re: 32-bit IO to-do item...
- Re: 32-bit IO to-do item...
- Re: 32-bit IO to-do item...
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- 32-bit IO to-do item...
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- [Bug 12874] Seagate STT20000A no longer works
- [Bug 12874] Seagate STT20000A no longer works
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- [PATCH #upstream-fixes] ahci: force CAP_NCQ for earlier NV MCPs
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
- [PATCH] sata_sx4: refresh and convert to new EH
- Re: [eSATA] 2.6.28.7: IO errors
- From: Guennadi Liakhovetski
- Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
- Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
- Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
- Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
- Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
- Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
- Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
- Re: PMPs
- Re: libata errors
- Re: [PATCH 4/5] ide: Add support for TRIM
- Re: [PATCH 4/5] ide: Add support for TRIM
- Re: [PATCH 4/5] ide: Add support for TRIM
- Re: [PATCH 4/5] ide: Add support for TRIM
- Re: [PATCH 4/5] ide: Add support for TRIM
- Re: libata errors
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- [git pull] IDE updates part 4 (revised)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] libata: add CFA specific identify data words
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: libata errors
- Re: [PATCH 4/5] ide: Add support for TRIM
- From: Markus Trippelsdorf
- [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
- Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- [PATCH] ahci: add ACard 8620 support (rough draft)
- [Bug 12874] Seagate STT20000A no longer works
- [Bug 12874] Seagate STT20000A no longer works
- Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
- Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
- Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
- [PATCH v2] ahci: Add Marvell PATA support
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: libata errors
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: [git pull] IDE updates part 4
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
- [PATCH 1/2] libata EH: freeze port before aborting commands
- Re: [git pull] IDE updates part 4
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata-eh: call freeze hook before port abort
- Re: [git pull] IDE updates part 4
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 4/5] ide: Add support for TRIM
- From: Bartlomiej Zolnierkiewicz
- Re: [git pull] IDE updates part 4
- Re: [PATCH 4/5] ide: Add support for TRIM
- [git pull] IDE updates part 4
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 4/5] ide: Add support for TRIM
- Re: libata errors
- Re: [PATCH 4/5] ide: Add support for TRIM
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] at91_ide: remove unused ide_mm_{outb,inb}
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] at91_ide: remove custom tf_{read|load}() methods (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: PATCH 2/2] at91_ide: turn on PIO 6 support
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] ide-cd: reverse NOT_READY sense key logic
- From: Bartlomiej Zolnierkiewicz
- [PATCH] libata-eh: call freeze hook before port abort
- Re: Problems with >3 drives on an eSATA portmultiplier
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- libata errors
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: [PATCH 4/5] ide: Add support for TRIM
- [PATCH libata: add SSD detection hueristic; move SSD setup to ata_dev_configure (was Re: [GIT PULL] Ext3 latency fixes)
- Re: [PATCH 4/5] ide: Add support for TRIM
- From: Markus Trippelsdorf
- Re: [PATCH 4/5] ide: Add support for TRIM
- Re: [PATCH 4/5] ide: Add support for TRIM
- [PATCH] at91_ide: remove custom tf_{read|load}() methods (take 2)
- Fwd: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- [PATCH] hpt366: fix HPT370 DMA timeouts
- [PATCH] cs5536: define dma_sff_read_status() method
- "ahci: drop intx manipulation on msi enable" breaks ULI M1575
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: can I freeze I/O for some time to a given disk / md / dm
- Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
- Re: [PATCH 1/2] at91_ide: remove unused ide_mm_{outb,inb}
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: [PATCH 2/2] ide-cd: cdrom_decode_status: use return codes instead of naked numbers
- Re: [PATCH 1/2] ide-cd: reverse NOT_READY sense key logic
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- Re: ata_check_status_mmio exception kernel panic
- Re: ata_check_status_mmio exception kernel panic
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- [git patches] libata updates
- Re: [PATCH 01/03] sata_mv: revert SoC irq breakage
- Re: [PATCH v2] libata: ahci enclosure management bios workaround
- Re: [PATCH 3/5] ata: Add TRIM infrastructure
- Re: [PATCH] libata: Remove some redundant casts from pata_octeon_cf.c
- Re: [PATCH #upstream-fixes] ata_piix: VGN-BX297XP wants the controller power up on suspend
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- PATCH 2/2] at91_ide: turn on PIO 6 support
- [PATCH 1/2] at91_ide: remove unused ide_mm_{outb,inb}
- Re: [PATCH 3/6] ide: move common code out of tf_load() method
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] ide: remove unused #include <linux/version.h>
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/6] ide: simplify 'struct ide_taskfile'
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/2] ide-cd: cdrom_decode_status: use return codes instead of naked numbers
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/5] ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] ide-cd: reverse NOT_READY sense key logic
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] tx4939ide: Fix tx4939ide_{in,out}put_data_swap argument
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
- From: Bartlomiej Zolnierkiewicz
- [PATCH 08/08] sata_mv: shorten register names
- [Bug 13026] cs5536 is broken
- Re: [PATCH 1/5] Block: Discard may need to allocate pages
- [Bug 13026] New: cs5536 is broken
- Re: [PATCH 06/07] sata_mv: cosmetic renames
- Re: [PATCH 06/07] sata_mv: cosmetic renames
- [PATCH 07/07] sata_mv: workaround errata SATA#13
- [PATCH 06/07] sata_mv: cosmetic renames
- [PATCH 05/07] sata_mv: workaround errata SATA#26
- [PATCH 04/07] sata_mv: workaround errata PCI#7
- [PATCH 03/03] sata_mv: replace 0x1f with ATA_PIO4 (v2)
- Re: 2.6.29.1 BUG: unable to handle kernel NULL pointer dereference at (null)
- Re: 2.6.29.1 BUG: unable to handle kernel NULL pointer dereference at (null)
- 2.6.29.1 BUG: unable to handle kernel NULL pointer dereference at (null)
- [PATCH] tx4939ide: Fix tx4939ide_{in,out}put_data_swap argument
- [PATCH 03/03] sata_mv: replace 0x1f with ATA_PIO4
- [PATCH 02/03] sata_mv: fix irq mask races
- [PATCH 01/03] sata_mv: revert SoC irq breakage
- Re: [PATCH] tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
- [PATCH] tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
- [Bug 12874] Seagate STT20000A no longer works
- [Bug 12874] Seagate STT20000A no longer works
- [Bug 12874] Seagate STT20000A no longer works
- Re: [PATCH 1/5] Block: Discard may need to allocate pages
- [Bug 12874] Seagate STT20000A no longer works
- Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
- [PATCH 2/2] ide-cd: cdrom_decode_status: use return codes instead of naked numbers
- [PATCH 1/2] ide-cd: reverse NOT_READY sense key logic
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]