Hi,
Fix for ide-cd error recovery OOPS, workaround for broken cable
detection on TSST SH-S202* ATAPI devices, improvements to error
reporting and addition of VIA VX855/VX875 IDE support.
Linus, please pull from 'for-linus' branch of:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git for-linus
to receive the following updates:
drivers/ide/ide-io.c | 4 ++--
drivers/ide/ide-iops.c | 21 +++++++++++++++++----
drivers/ide/ide-lib.c | 27 ++++++---------------------
drivers/ide/ide-probe.c | 9 ++++++---
drivers/ide/via82cxxx.c | 2 ++
include/linux/ide.h | 2 +-
include/linux/pci_ids.h | 2 +-
7 files changed, 35 insertions(+), 32 deletions(-)
Bartlomiej Zolnierkiewicz (5):
ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)
ide: fix OOPS during ide-cd error recovery
ide: fix printk() levels in ide_dump_ata[pi]_error()
ide: improve failed opcode reporting
ide: report timeouts in ide_busy_sleep()
Harald Welte (1):
via82cxxx: Add VIA VX855 PCI Device ID
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 35dc38d..6415a2e 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -696,7 +696,7 @@ void ide_timer_expiry (unsigned long data)
}
spin_lock_irq(&hwif->lock);
enable_irq(hwif->irq);
- if (startstop == ide_stopped) {
+ if (startstop == ide_stopped && hwif->polling == 0) {
ide_unlock_port(hwif);
plug_device = 1;
}
@@ -868,7 +868,7 @@ irqreturn_t ide_intr (int irq, void *dev_id)
* same irq as is currently being serviced here, and Linux
* won't allow another of the same (on any CPU) until we return.
*/
- if (startstop == ide_stopped) {
+ if (startstop == ide_stopped && hwif->polling == 0) {
BUG_ON(hwif->handler);
ide_unlock_port(hwif);
plug_device = 1;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c19a221..06fe002 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
/*
* Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
- * We list them here and depend on the device side cable detection for them.
- *
* Some optical devices with the buggy firmwares have the same problem.
*/
static const struct drive_list_entry ivb_list[] = {
@@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive)
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
- if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
- (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
+ if (id[ATA_ID_HW_CONFIG] & 0x4000)
return 1;
+ if (ivb) {
+ const char *model = (char *)&id[ATA_ID_PROD];
+
+ if (strstr(model, "TSSTcorp CDDVDW SH-S202")) {
+ /*
+ * These ATAPI devices always report 80c cable
+ * so we have to depend on the host in this case.
+ */
+ if (hwif->cbl == ATA_CBL_PATA80)
+ return 1;
+ } else {
+ /* Depend on the device side cable detection. */
+ if (id[ATA_ID_HW_CONFIG] & 0x2000)
+ return 1;
+ }
+ }
no_80w:
if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
return 0;
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 56ff8c4..2148df8 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -31,24 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
blk_queue_bounce_limit(drive->queue, addr);
}
-static void ide_dump_opcode(ide_drive_t *drive)
-{
- struct request *rq = drive->hwif->rq;
- struct ide_cmd *cmd = NULL;
-
- if (!rq)
- return;
-
- if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
- cmd = rq->special;
-
- printk(KERN_ERR "ide: failed opcode was: ");
- if (cmd == NULL)
- printk(KERN_CONT "unknown\n");
- else
- printk(KERN_CONT "0x%02x\n", cmd->tf.command);
-}
-
u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48)
{
struct ide_taskfile *tf = &cmd->tf;
@@ -91,7 +73,7 @@ static void ide_dump_sector(ide_drive_t *drive)
static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
- printk(KERN_ERR "{ ");
+ printk(KERN_CONT "{ ");
if (err & ATA_ABORTED)
printk(KERN_CONT "DriveStatusError ");
if (err & ATA_ICRC)
@@ -121,7 +103,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
{
- printk(KERN_ERR "{ ");
+ printk(KERN_CONT "{ ");
if (err & ATAPI_ILI)
printk(KERN_CONT "IllegalLengthIndication ");
if (err & ATAPI_EOM)
@@ -179,7 +161,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
else
ide_dump_atapi_error(drive, err);
}
- ide_dump_opcode(drive);
+
+ printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n",
+ drive->name, drive->hwif->cmd.tf.command);
+
return err;
}
EXPORT_SYMBOL(ide_dump_status);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 7f264ed..c895ed5 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -295,7 +295,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id)
timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
- if (ide_busy_sleep(hwif, timeout, use_altstatus))
+ if (ide_busy_sleep(drive, timeout, use_altstatus))
return 1;
/* wait for IRQ and ATA_DRQ */
@@ -316,8 +316,9 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id)
return rc;
}
-int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
+int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus)
{
+ ide_hwif_t *hwif = drive->hwif;
u8 stat;
timeout += jiffies;
@@ -330,6 +331,8 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
return 0;
} while (time_before(jiffies, timeout));
+ printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__);
+
return 1; /* drive timed-out */
}
@@ -420,7 +423,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
tp_ops->dev_select(drive);
msleep(50);
tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
- (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0);
+ (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0);
rc = ide_dev_read_id(drive, cmd, id);
}
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 3ff7231..028de26 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -67,6 +67,7 @@ static struct via_isa_bridge {
u8 udma_mask;
u8 flags;
} via_isa_bridges[] = {
+ { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
@@ -474,6 +475,7 @@ static const struct pci_device_id via_pci_tbl[] = {
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
{ 0, },
diff --git a/include/linux/ide.h b/include/linux/ide.h
index ff65fff..9fed365 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1109,7 +1109,7 @@ void ide_fix_driveid(u16 *);
extern void ide_fixstring(u8 *, const int, const int);
-int ide_busy_sleep(ide_hwif_t *, unsigned long, int);
+int ide_busy_sleep(ide_drive_t *, unsigned long, int);
int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 06ba90c..0f71812 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1406,7 +1406,7 @@
#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
#define PCI_DEVICE_ID_VIA_838X_1 0xB188
#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
-#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409
+#define PCI_DEVICE_ID_VIA_VX855_IDE 0xC409
#define PCI_DEVICE_ID_VIA_ANON 0xFFFF
#define PCI_VENDOR_ID_SIEMENS 0x110A
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
