Hello,
using 2.6.30-rc6, I get the following problems when I read from a SSD
disk, connected to the
3.0 Gb SATA controller of the MPC8315E SoC rev 1.0 running Linux 2.6.30-rc6.
Below see the output from two dd read runs.
The disk behaves fine on a x86 box.
What I can do to (help) pin-point the problem?
Regards,
Leon.
root@mpc8315e-rdb:~# dd if=/dev/sda of=/dev/null bs=4k
ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd c8/00:3e:1e:e0:01/00:00:00:00:00/e0 tag 0 dma 31744 in
res 50/00:3e:e0:df:01/00:00:00:00:00/e0 Emask 0x1 (device error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: Signature Update detected @ 3528 msecs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 01 df e0
sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 122910
__ratelimit: 52 callbacks suppressed
Buffer I/O error on device sda, logical block 122910
Buffer I/O error on device sda, logical block 122911
Buffer I/O error on device sda, logical block 122912
Buffer I/O error on device sda, logical block 122913
Buffer I/O error on device sda, logical block 122914
Buffer I/O error on device sda, logical block 122915
Buffer I/O error on device sda, logical block 122916
Buffer I/O error on device sda, logical block 122917
Buffer I/O error on device sda, logical block 122918
Buffer I/O error on device sda, logical block 122919
ata2: EH complete
dd: /dev/sda: Input/output error
root@mpc8315e-rdb:~# dd if=/dev/sda of=/dev/null bs=4k
ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd c8/00:32:9a:6e:00/00:00:00:00:00/e0 tag 0 dma 25600 in
res 50/00:3e:5c:6e:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: Signature Update detected @ 3528 msecs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 6e 5c
sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 28314
__ratelimit: 52 callbacks suppressed
Buffer I/O error on device sda, logical block 28314
Buffer I/O error on device sda, logical block 28315
Buffer I/O error on device sda, logical block 28316
Buffer I/O error on device sda, logical block 28317
Buffer I/O error on device sda, logical block 28318
Buffer I/O error on device sda, logical block 28319
Buffer I/O error on device sda, logical block 28320
Buffer I/O error on device sda, logical block 28321
Buffer I/O error on device sda, logical block 28322
Buffer I/O error on device sda, logical block 28323
ata2: EH complete
dd: /dev/sda: Input/output error
root@mpc8315e-rdb:~# uname -a
Linux mpc8315e-rdb 2.6.30-rc6 #1 Mon Jun 8 15:54:00 CEST 2009 ppc unknown
root@mpc8315e-rdb:~# hdparm -i /dev/sda
/dev/sda:
Model=Solidata X SSD , FwRev=0955 , SerialNo=<...>
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=128, MultSect=?1?
CurCHS=16383/16/63, CurSects=16514064, LBA=no
IORDY=no, tPIO={min:240,w/IORDY:120}
PIO modes: pio0 pio3 pio4
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=yes: disabled (255) WriteCache=disabled
Drive conforms to: Unspecified: ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
ATA/ATAPI-7
* signifies the current active mode
--
Leon
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
