Hi,
I'm using 2.6.29-2-amd64 now and the bug still exists (see previous
mails) with AHCI and NCQ enabled.
Maybe I should contact Seagate Support now?
I wonder that nobody else reported this sort of problem?
Tejun Heo wrote:
Hello,
Thomas Jackowski wrote:
some additional information (2.6.26-1) and ata_piix:
[653158.828848] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
[653158.828856] ata3.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 0
[653158.828857] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
Hmmm... that's timeout on CHECK POWER.
[653158.828860] ata3.00: status: { DRDY }
[653158.828868] ata3: hard resetting link
[653159.331110] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[653159.355648] ata3.00: configured for UDMA/133
[653159.355666] ata3: EH complete
[653159.371885] sd 2:0:0:0: [sde] 1953523055 512-byte hardware sectors
(1000204 MB)
[653159.374081] sd 2:0:0:0: [sde] Write Protect is off
[653159.374081] sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00
[653159.390212] sd 2:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
I tried 2.6.29 and I had no outputs in kernel.log with AHCI and w/o NCQ.
But my system still had hiccups (system hangs for a second) so I am not
sure if there was just no output to kernel.log (due using debian
unstable kernel with eventually mysterious options).
I will observe this and report if any error occurs again.
Thanks.
--
Gruß,
Thomas
WWW: http://nice-pic.de
Hadifon: ~2127
E-Mail: aXe@xxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
