Hi,
I assume a problem between Seagate Drives and the ATA Drivers.
Chipset is a ICH10R, but this problems has been seen on a ICH9 also.
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31000340AS
Serial Number: 6QJ03QBN
Firmware Version: SD1A
User Capacity: 1,000,203,804,160 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Mar 27 10:58:37 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
This is /dev/sdc. /dev/sdd and /dev/sde is the same model with the same
Firmware. I'm using a RAID5 on these 3 HDDs.
Because of the Seagate Firmware Bug I had to upgrade the firmware from
'SD15' to 'SD1A'. The upgrade was successful.
Before the upgrade there were no problems, after the upgrade I have
trouble like this:
[14144.875924] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[14144.875931] ata4.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0
pio 512 in
[14144.875932] res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask
0x4 (timeout)
[14144.875934] ata4.00: status: { DRDY }
[14144.875938] ata4: hard resetting link
[14145.362708] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14145.526248] ata4.00: configured for UDMA/133
[14145.526261] ata4: EH complete
[14145.550243] sd 3:0:0:0: [sdd] 1953523055 512-byte hardware sectors
(1000204 MB)
[14145.550263] sd 3:0:0:0: [sdd] Write Protect is off
[14145.550265] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[14145.550282] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[507139.744594] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
[507139.744602] ata5.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 0
[507139.744603] res 40/00:00:be:ac:54/00:00:1b:00:00/e0 Emask
0x4 (timeout)
[507139.744606] ata5.00: status: { DRDY }
[507139.744611] ata5: hard resetting link
[507140.247396] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[507140.251384] ata5.00: configured for UDMA/133
[507140.251384] ata5: EH complete
[507140.253668] sd 4:0:0:0: [sde] 1953523055 512-byte hardware sectors
(1000204 MB)
[507140.253681] sd 4:0:0:0: [sde] Write Protect is off
[507140.253683] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[507140.253701] sd 4:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't suppo
rt DPO or FUA
[507453.049511] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
[507453.049519] ata4.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 0
[507453.049520] res 40/00:00:3e:e0:54/00:00:1b:00:00/e0 Emask
0x4 (timeout)
[507453.049523] ata4.00: status: { DRDY }
[507453.049529] ata4: hard resetting link
[507453.547144] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[507453.843855] ata4.00: configured for UDMA/133
[507453.843855] ata4: EH complete
[507453.871434] sd 3:0:0:0: [sdd] 1953523055 512-byte hardware sectors
(1000204 MB)
[507453.872475] sd 3:0:0:0: [sdd] Write Protect is off
[507453.872475] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[507453.872475] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
Where is the problem?
Bye, Thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
