Linux IDE Archive

• Thread Index

• Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
  • From: Sergei Shtylyov
• [PATCH block#for-2.6.31 3/3] bio: always copy back data for copied kernel requests
  • From: Tejun Heo
• [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
  • From: Tejun Heo
• [PATCH block#for-2.6.31 1/3] ub: use __blk_end_request_all()
  • From: Tejun Heo
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• Re: [PATCH 7/7] ide: remove hw_regs_t typedef
  • From: Sergei Shtylyov
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Arnd Bergmann
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Tejun Heo
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Arnd Bergmann
• Re: [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Mikael Pettersson
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Tejun Heo
• [PATCH 08/15] ide-floppy/ide_floppy_format_unit: use local buffer
  • From: Borislav Petkov
• [PATCH 11/15] ide-tape/ide_tape_get_bsize_from_bdesc: use local buffer
  • From: Borislav Petkov
• [PATCH 04/15] ide-atapi: add a len-parameter to ide_queue_pc_tail
  • From: Borislav Petkov
• [PATCH 05/15] ide-atapi: add a buffer-arg to ide_queue_pc_tail
  • From: Borislav Petkov
• [PATCH 10/15] ide-floppy/ide_floppy_get_format_progress: use local sense buffer
  • From: Borislav Petkov
• [PATCH 15/15] ide: unify interrupt reason checking
  • From: Borislav Petkov
• [PATCH 14/15] ide-cd: use whole request_sense buffer in EH
  • From: Borislav Petkov
• [PATCH 13/15] ide-atapi: remove pc->buf
  • From: Borislav Petkov
• [PATCH 12/15] ide-tape: fix READ POSITION cmd handling
  • From: Borislav Petkov
• [PATCH 09/15] ide-atapi: use local sense buffer
  • From: Borislav Petkov
• [PATCH 03/15] ide-atapi: switch to rq->resid_len
  • From: Borislav Petkov
• [PATCH 01/15] ide-tape: fix potential fs requests bug
  • From: Borislav Petkov
• [PATCH 07/15] ide-floppy/ide_floppy_get_sfrp_bit: use local buffer
  • From: Borislav Petkov
• [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
  • From: Borislav Petkov
• [PATCH 06/15] ide-floppy/ide_floppy_get_flexible_disk_page: use local buffer
  • From: Borislav Petkov
• [PATCH 02/15] ide-atapi: switch to blk_rq_bytes() on do_request() path
  • From: Borislav Petkov
• [PATCH 12/13] libata: Report disk alignment and physical block size
  • From: Martin K. Petersen
• [PATCH 13/13] libata: Media rotation rate and form factor heuristics
  • From: Martin K. Petersen
• [PATCH 01/13] block: Do away with the notion of hardsect_size
  • From: Martin K. Petersen
• [PATCH 02/13] block: Use accessor functions for queue limits
  • From: Martin K. Petersen
• [PATCH 10/13] sd: Block limits VPD support
  • From: Martin K. Petersen
• [PATCH 07/13] block: Deprecate blk_queue_stack_limits
  • From: Martin K. Petersen
• [PATCH 08/13] sd: Physical block size and alignment support
  • From: Martin K. Petersen
• [PATCH 05/13] block: Export I/O topology for block devices and partitions
  • From: Martin K. Petersen
• [PATCH 06/13] MD: Use new topology calls to indicate alignment and I/O sizes
  • From: Martin K. Petersen
• [PATCH 09/13] sd: Detect non-rotational devices
  • From: Martin K. Petersen
• [PATCH 11/13] scsi_debug: Add support for physical block exponent and alignment
  • From: Martin K. Petersen
• [PATCH 03/13] block: Move queue limits to an embedded struct
  • From: Martin K. Petersen
• [PATCH 04/13] block: Expose stacked device queues in sysfs
  • From: Martin K. Petersen
• I/O Topology v3
  • From: Martin K. Petersen
• Re: [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
  • From: Sergei Shtylyov
• Re: [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
  • From: Sergei Shtylyov
• Re: [PATCH 5/7] ide: remove chipset field from hw_regs_t
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• [PATCH] sata_fsl: Fix the command description of FSL SATA controller
  • From: Kumar Gala
• Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
  • From: David Milburn
• Re: [PATCH 4/7] ide: replace special_t typedef by IDE_SFLAG_* flags
  • From: Sergei Shtylyov
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• [Bug 13308] ide-tape boot kernel panic
  • From: bugzilla-daemon
• [Bug 13308] New: ide-tape boot kernel panic
  • From: bugzilla-daemon
• Re: [PATCH 3/7] ide: merge ide_disk_special() into do_special()
  • From: Sergei Shtylyov
• [PATCH v3] sata_fsl: Fix compile warnings
  • From: Kumar Gala
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: FUJITA Tomonori
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Robert Hancock
• Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
  • From: David Milburn
• Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
  • From: David Milburn
• Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
  • From: Jeff Garzik
• Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
  • From: Jeff Garzik
• [PATCH #sx4] sata_sx4: fixup interrupt handling
  • From: David Milburn
• Re: [PATCH 0/7] ide: minor improvements/cleanups
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2] sata_fsl: Fix compile warnings
  • From: Kumar Gala
• Re: [PATCH] sata_fsl: Fix compile warnings
  • From: Becky Bruce
• [PATCH] sata_fsl: Fix compile warnings
  • From: Kumar Gala
• Re: [PATCH 3/7] ide: merge ide_disk_special() into do_special()
  • From: Joe Perches
• [PATCH 7/7] ide: remove hw_regs_t typedef
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/7] ide: remove chipset field from hw_regs_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/7] ide: replace special_t typedef by IDE_SFLAG_* flags
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/7] ide: merge ide_disk_special() into do_special()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/7] ide: BUG() on unknown flags in ide_disk_special()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/7] ide: BUG() on unknown requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/7] ide: minor improvements/cleanups
  • From: Bartlomiej Zolnierkiewicz
• Re: Help with SATA driver/libata/SCSI subsystem
  • From: Jeff Garzik
• stex : invalid tag
  • From: Raz
• Re: Delay on intialization ide subsystem(most likely)
  • From: Bartlomiej Zolnierkiewicz
• [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• Re: [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: Bartlomiej Zolnierkiewicz
• [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• Re: Delay on intialization ide subsystem(most likely)
  • From: Andrey Gusev
• Re: [PATCH 1/2] libata: Use IGN_SIMPLEX for ALi
  • From: Alan Cox
• Re: [PATCH 1/2] libata: Use IGN_SIMPLEX for ALi
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: [PATCH] libata: Use IGN_SIMPLEX for ALi
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: Use IGN_SIMPLEX for ALi
  • From: Alan Cox
• [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• Re: [PATCH] libata: Use IGN_SIMPLEX for ALi
  • From: Bartlomiej Zolnierkiewicz
• Re: [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: Bartlomiej Zolnierkiewicz
• Re: Delay on intialization ide subsystem(most likely)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ata_piix: Enable parallel scan
  • From: Alan Cox
• [PATCH 1/2] libata: Use IGN_SIMPLEX for ALi
  • From: Alan Cox
• [PATCH 0/2] Series short description
  • From: Alan Cox
• [PATCH] libata: Use IGN_SIMPLEX for ALi
  • From: Alan Cox
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Arnd Bergmann
• [Bug 13297] kernel panic - not syncing : fatel exception in interupt
  • From: bugzilla-daemon
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Geert Uytterhoeven
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Alan Cox
• [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• Re: 2.6.30-rc4 kernel
  • From: Andrew Morton
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Brad Boyer
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Michael Schmitz
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Brad Boyer
• Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
  • From: Andy Isaacson
• Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
  • From: Robert Hancock
• Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
  • From: Andy Isaacson
• Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
  • From: Robert Hancock
• Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
  • From: Andy Isaacson
• Re: [patch 1/1] pata-rb532-cf: platform_get_irq() failure ignored
  • From: Phil Sutter
• [patch 1/1] pata-rb532-cf: platform_get_irq() failure ignored
  • From: akpm
• Re: Delay on intialization ide subsystem(most likely)
  • From: Andrey Gusev
• [Bug 13286] dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• Re: [Bug 13286] New: dma_timer_expiry: DMA status (0x21)
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Boaz Harrosh
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: James Bottomley
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: FUJITA Tomonori
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Boaz Harrosh
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: FUJITA Tomonori
• Re: [PATCH 03/14] ide-atapi: switch to rq->resid_len
  • From: Sergei Shtylyov
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Alan Stern
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: James Bottomley
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Arnd Bergmann
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Arnd Bergmann
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Arnd Bergmann
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Boaz Harrosh
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Boaz Harrosh
• Re: [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Jeff Garzik
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Mikael Pettersson
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Boaz Harrosh
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Boaz Harrosh
• Re: SATA disks resets in a md setup
  • From: Tejun Heo
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Alan Cox
• Re: [PATCH 09/14] ide-atapi: use local sense buffer
  • From: Borislav Petkov
• [Bug 13286] New: dma_timer_expiry: DMA status (0x21)
  • From: bugzilla-daemon
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: James Bottomley
• [PATCH UPDATED #upstream] ahci: misc cleanups for EM stuff
  • From: Tejun Heo
• Re: [PATCH] ata: libata depends on HAS_DMA
  • From: Jeff Garzik
• Re: [dm-devel] Re: [PATCH 1/3] block: add alt_size
  • From: Tejun Heo
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: FUJITA Tomonori
• [PATCH] ata: libata depends on HAS_DMA
  • From: Arnd Bergmann
• Re: [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Benjamin Herrenschmidt
• Re: [PATCH] ide: remove driver_data direct access of struct device
  • From: Greg KH
• [PATCH] ide: remove driver_data direct access of struct device
  • From: Roel Kluin
• Re: [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Lennart Sorensen
• Re: [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Alan Cox
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: clear ering on resume
  • From: Jeff Garzik
• Re: [PATCH] libata: fix suspend/resume for ATA SEMB devices
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: use new sata phy register settings for new devices
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: fix attach error handling
  • From: Jeff Garzik
• Re: [PATCH 2/4] ata_piix: The Sony TZ90 needs the cable type hardcoding
  • From: Jeff Garzik
• Re: [PATCH 1/3 v3] Added support for Designware SATA controller driver
  • From: Jeff Garzik
• Re: [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Lennert Buytenhek
• Re: [PATCH #upstream] ahci: misc cleanups for EM stuff
  • From: Jeff Garzik
• Re: [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Jeff Garzik
• Re: [PATCH 0/4] Series short description
  • From: Alan Cox
• Re: [PATCH 0/4] Series short description
  • From: Jeff Garzik
• Re: [PATCH 0/4] Series short description
  • From: Alan Cox
• Re: [PATCH 0/4] Series short description
  • From: Jeff Garzik
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: James Bottomley
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: FUJITA Tomonori
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: FUJITA Tomonori
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: James Bottomley
• Re: [dm-devel] Re: [PATCH 1/3] block: add alt_size
  • From: Konrad Rzeszutek
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
  • From: Boaz Harrosh
• Re: [PATCH 03/14] ide-atapi: switch to rq->resid_len
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 08/11] block: cleanup rq->data_len usages
  • From: Boaz Harrosh
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Boaz Harrosh
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: SATA disks resets in a md setup
  • From: Vassilis Virvilis
• Re: [GIT PATCH] block: unify request processing model and implement peek/fetch
  • From: Jens Axboe
• Re: [PATCH 03/14] ide-atapi: switch to rq->resid_len
  • From: Borislav Petkov
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: FUJITA Tomonori
• Re: sata_inic162x for help
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [RFC PATCH 0/12] ide-atapi remove pc->buf
  • From: Tejun Heo
• Re: [mmotm 2009-04-30] ata: failed to IDENTIFY
  • From: Tejun Heo
• Re: [PATCH 18/18] block: implement and enforce request peek/start/fetch
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 14/14] ide: unify interrupt reason checking
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC PATCH 0/12] ide-atapi remove pc->buf
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 09/14] ide-atapi: use local sense buffer
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 05/14] ide-atapi: add a buffer-arg to ide_queue_pc_tail
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/14] ide-atapi: switch to rq->resid_len
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 02/14] ide-atapi: switch to blk_rq_bytes() on do_request() path
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Boaz Harrosh
• [mmotm 2009-04-30] ata: failed to IDENTIFY
  • From: Wu Fengguang
• Re: [GIT PATCH] block: unify request processing model and implement peek/fetch
  • From: Tejun Heo
• Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity
  • From: Tejun Heo
• Re: sata_inic162x for help
  • From: Tejun Heo
• Re: 2.9.29.2: ide-tape: panic when probing device at boot
  • From: Tejun Heo
• Re: 2.9.29.2: ide-tape: panic when probing device at boot
  • From: Tejun Heo
• Re: SATA disks resets in a md setup
  • From: v.virvilis
• Re: [PATCH 1/3] block: add alt_size
  • From: Kay Sievers
• Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity
  • From: James Bottomley
• Re: 2.9.29.2: ide-tape: panic when probing device at boot
  • From: Borislav Petkov
• Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: fix attach error handling
  • From: Tejun Heo
• Re: [PATCH 01/18] ide: dequeue in-flight request
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.9.29.2: ide-tape: panic when probing device at boot
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: fix suspend/resume for ATA SEMB devices
  • From: Tejun Heo
• Re: [PATCH] libata: fix suspend/resume for ATA SEMB devices
  • From: Borislav Petkov
• Re: [PATCH 1/3] block: add alt_size
  • From: Tejun Heo
• Re: [PATCH 1/3] block: add alt_size
  • From: Kay Sievers
• Re: [PATCH 01/14] ide-tape: fix potential fs requests bug
  • From: Borislav Petkov
• Re: [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Karl Hiramoto
• Re: [PATCH 01/14] ide-tape: fix potential fs requests bug
  • From: Sam Ravnborg
• Re: [PATCH 01/14] ide-tape: fix potential fs requests bug
  • From: Borislav Petkov
• Re: How to assess PMP register
  • From: Tejun Heo
• Re: [PATCH 01/14] ide-tape: fix potential fs requests bug
  • From: Sam Ravnborg
• [PATCH 14/14] ide: unify interrupt reason checking
  • From: Borislav Petkov
• [PATCH 05/14] ide-atapi: add a buffer-arg to ide_queue_pc_tail
  • From: Borislav Petkov
• [PATCH 13/14] ide-cd: use whole request_sense buffer in EH
  • From: Borislav Petkov
• [PATCH 09/14] ide-atapi: use local sense buffer
  • From: Borislav Petkov
• [PATCH 08/14] ide-floppy/ide_floppy_format_unit: use local buffer
  • From: Borislav Petkov
• [PATCH 07/14] ide-floppy/ide_floppy_get_sfrp_bit: use local buffer
  • From: Borislav Petkov
• [PATCH 06/14] ide-floppy/ide_floppy_get_flexible_disk_page: use local buffer
  • From: Borislav Petkov
• [PATCH 11/14] ide-tape/ide_tape_get_bsize_from_bdesc: use local buffer
  • From: Borislav Petkov
• [PATCH 12/14] ide-atapi: remove pc->buf
  • From: Borislav Petkov
• [PATCH 10/14] ide-tape: fix READ POSITION cmd handling
  • From: Borislav Petkov
• [PATCH 04/14] ide-atapi: add a len-parameter to ide_queue_pc_tail
  • From: Borislav Petkov
• [PATCH 02/14] ide-atapi: switch to blk_rq_bytes() on do_request() path
  • From: Borislav Petkov
• [PATCH 01/14] ide-tape: fix potential fs requests bug
  • From: Borislav Petkov
• [PATCH 03/14] ide-atapi: switch to rq->resid_len
  • From: Borislav Petkov
• [RFC PATCH 0/12] ide-atapi remove pc->buf
  • From: Borislav Petkov
• Re: SATA disks resets in a md setup
  • From: Jeff Garzik
• Re: [PATCH 01/18] ide: dequeue in-flight request
  • From: Borislav Petkov
• Re: How to assess PMP register
  • From: s ticket
• Re: How to assess PMP register
  • From: Tejun Heo
• Re: How to assess PMP register
  • From: s ticket
• Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity
  • From: James Bottomley
• [PATCH 1/3] block: add alt_size
  • From: Tejun Heo
• [PATCH 3/3] libata: export HPA size as alt_size
  • From: Tejun Heo
• [PATCH 2/3] scsi: add scsi_device->alt_capacity
  • From: Tejun Heo
• [GIT PATCH] block,scsi,libata: implement alt_size, take#2
  • From: Tejun Heo
• Re: sata_sil24 EH complete
  • From: Tejun Heo
• Re: [PATCH 16/18] gdrom: dequeue in-flight request
  • From: Tejun Heo
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: joao . ramos
• Re: [PATCH 16/18] gdrom: dequeue in-flight request
  • From: Adrian McMenamin
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Dan Williams
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Jeff Garzik
• Re: [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Sergei Shtylyov
• Re: [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Sergei Shtylyov
• Re: [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Sergei Shtylyov
• Re: sata_sil24 EH complete
  • From: Tim Connors
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: [PATCH] ide: remove driver_data direct access of struct device
  • From: Bartlomiej Zolnierkiewicz
• Re: EP93xx PIO IDE driver proposal
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Fix the command description of FSL SATA controller
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v3] Add 4xx SATA dts node documentation
  • From: Sergei Shtylyov
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
  • From: Tejun Heo
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Tejun Heo
• [PATCH 03/18] mg_disk: dequeue and track in-flight request
  • From: Tejun Heo
• [PATCH 10/18] amiflop: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 14/18] jsflash: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 11/18] swim: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 12/18] xd: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 15/18] z2ram: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 09/18] ps3disk: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 16/18] gdrom: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 17/18] block: convert to dequeueing model (easy ones)
  • From: Tejun Heo
• [PATCH 13/18] mtd_blkdevs: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 07/18] xsysace: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 01/18] ide: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 08/18] paride: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 18/18] block: implement and enforce request peek/start/fetch
  • From: Tejun Heo
• [GIT PATCH] block: unify request processing model and implement peek/fetch
  • From: Tejun Heo
• [PATCH 06/18] swim3: dequeue in-flight request
  • From: Tejun Heo
• [PATCH 05/18] ataflop: dequeue and track in-flight request
  • From: Tejun Heo
• [PATCH 04/18] hd: dequeue and track in-flight request
  • From: Tejun Heo
• [PATCH 02/18] mg_disk: fix queue hang / infinite retry on !fs requests
  • From: Tejun Heo
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
  • From: FUJITA Tomonori
• RE: EP93xx PIO IDE driver proposal
  • From: H Hartley Sweeten
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: EP93xx PIO IDE driver proposal
  • From: Ryan Mallon
• RE: EP93xx PIO IDE driver proposal
  • From: H Hartley Sweeten
• Re: EP93xx PIO IDE driver proposal
  • From: Ryan Mallon
• RE: EP93xx PIO IDE driver proposal
  • From: H Hartley Sweeten
• Re: EP93xx PIO IDE driver proposal
  • From: Ryan Mallon
• RE: EP93xx PIO IDE driver proposal
  • From: H Hartley Sweeten
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• [PATCH] ata: Fix the command description of FSL SATA controller
  • From: Dave Liu
• Re: EP93xx PIO IDE driver proposal
  • From: Alan Cox
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: FUJITA Tomonori
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
  • From: FUJITA Tomonori
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: [PATCH] libata: Add multi-count transfer debugging
  • From: Robert Hancock
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
  • From: Tejun Heo
• [PATCH 3/3 v3] Add 4xx SATA dts node documentation
  • From: Feng Kan
• [PATCH 2/3 v3] Added AMCC 460EX Canyonlands SATA support.
  • From: Feng Kan
• [PATCH 1/3 v3] Added support for Designware SATA controller driver
  • From: Feng Kan
• Re: [PATCH 1/2] Added support for Designware SATA controller driver
  • From: Feng Kan
• [PATCH] fix sata_sil compilation on non-DMI platforms
  • From: Konstantinos Margaritis
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• [PATCH 4/4] ata_piix: Remove stale comment
  • From: Alan Cox
• [PATCH 3/4] ata_piix: Turn on hotplugging support for older chips
  • From: Alan Cox
• [PATCH 2/4] ata_piix: The Sony TZ90 needs the cable type hardcoding
  • From: Alan Cox
• [PATCH 1/4] ata_piix: ICH7 does not support correct MWDMA timings
  • From: Alan Cox
• [PATCH 0/4] Series short description
  • From: Alan Cox
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• [PATCH] libata: Add multi-count transfer debugging
  • From: Carl-Daniel Hailfinger
• Re: How to assess PMP register
  • From: Gwendal Grignou
• Re: [bug#12874] Seagate STT20000A no longer works
  • From: Borislav Petkov
• Re: [PATCH] Fix ide-tape compilation error.
  • From: Borislav Petkov
• Re: sata_sil24 EH complete
  • From: Tim Connors
• Re: sata_sil24 EH complete
  • From: Tejun Heo
• [PATCH] Fix ide-tape compilation error.
  • From: Mark de Wever
• Re: [bug#12874] Seagate STT20000A no longer works
  • From: Mark de Wever
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Dan Williams
• [RFC]hpt366/ide-probe reset drive on probe error.
  • From: Karl Hiramoto
• sata_sil24 EH complete
  • From: Tim Connors
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• [PATCH 2.6.29-stable] cs5536: define dma_sff_read_status() method
  • From: Sergei Shtylyov
• Re: [stable] [PATCH] cs5536: define dma_sff_read_status() method
  • From: Sergei Shtylyov
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
  • From: Tejun Heo
• Re: [PATCH 05/11] block: convert to pos and nr_sectors accessors
  • From: Tejun Heo
• Re: [PATCH 04/11] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
  • From: Tejun Heo
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Tejun Heo
• Re: [PATCH] sata_mv: use new sata phy register settings for new devices
  • From: Mark Lord
• Re: How to assess PMP register
  • From: Mark Lord
• Re: [stable] [PATCH] cs5536: define dma_sff_read_status() method
  • From: Greg KH
• Re: [PATCH 05/11] block: convert to pos and nr_sectors accessors
  • From: Adrian McMenamin
• Re: [PATCH] sata_mv: use new sata phy register settings for new devices
  • From: Martin Michlmayr
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Dan Williams
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Boaz Harrosh
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: James Bottomley
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Douglas Gilbert
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: James Bottomley
• Re: [PATCH 08/11] block: cleanup rq->data_len usages
  • From: Sergei Shtylyov
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Douglas Gilbert
• Re: [PATCH 04/11] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
  • From: Sergei Shtylyov
• Re: [PATCH 03/11] block: add rq->resid_len
  • From: Sergei Shtylyov
• Re: EP93xx PIO IDE driver proposal
  • From: João Ramos
• Re: Kernel Panic 2.6.29.6 AMD Geode (in CS5536 IDE ?)
  • From: Sergei Shtylyov
• Re: Kernel Panic 2.6.29.6 AMD Geode (in CS5536 IDE ?)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/11] block: convert to pos and nr_sectors accessors
  • From: Tejun Heo
• [PATCH 02/11] ide-tape: don't initialize rq->sector for rw requests
  • From: Tejun Heo
• [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
  • From: Tejun Heo
• [PATCH 08/11] block: cleanup rq->data_len usages
  • From: Tejun Heo
• Re: Kernel Panic 2.6.29.6 AMD Geode (in CS5536 IDE ?)
  • From: Borislav Petkov
• [PATCH 04/11] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
  • From: Tejun Heo
• [PATCH 03/11] block: add rq->resid_len
  • From: Tejun Heo
• [PATCH 01/11] nbd: don't clear rq->sector and nr_sectors unnecessarily
  • From: Tejun Heo
• [PATCH 07/11] block: drop request->hard_* and *nr_sectors
  • From: Tejun Heo
• [PATCH 10/11] block: hide request sector and data_len
  • From: Tejun Heo
• [PATCH 06/11] ide: convert to rq pos and nr_sectors accessors
  • From: Tejun Heo
• [PATCH 11/11] block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup
  • From: Tejun Heo
• [PATCH 09/11] ide: cleanup rq->data_len usages
  • From: Tejun Heo
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Tejun Heo
• Re: [PATCH 07/10] block: drop request->hard_* and *nr_sectors
  • From: Tejun Heo
• Re: How to assess PMP register
  • From: s ticket
• Re: [PATCH 08/10] block: cleanup rq->data_len usages
  • From: Tejun Heo
• Re: dm-multipath completely breaks AHCI driver
  • From: Andrey Borzenkov
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Jason Riedy
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Jeff Garzik
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Jeff Garzik
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Matthew Wilcox
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Robert Hancock
• Re: dm-multipath completely breaks AHCI driver
  • From: Robert Hancock
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: James Bottomley
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: James Bottomley
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Jeff Garzik
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: James Bottomley
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Bartlomiej Zolnierkiewicz
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Jeff Garzik
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Jeff Garzik
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Boaz Harrosh
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Matthew Wilcox
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Hugh Dickins
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Boaz Harrosh
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Matthew Wilcox
• Re: [PATCH 08/10] block: cleanup rq->data_len usages
  • From: Boaz Harrosh
• Re: New TRIM/UNMAP tree published (2009-05-02)
  • From: Hugh Dickins
• dm-multipath completely breaks AHCI driver
  • From: Andrey Borzenkov
• New TRIM/UNMAP tree published (2009-05-02)
  • From: Matthew Wilcox
• Re: [PATCH 1/5] Block: Discard may need to allocate pages
  • From: Matthew Wilcox
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
  • From: Tejun Heo
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Tejun Heo
• Re: [PATCH 08/10] block: cleanup rq->data_len usages
  • From: Tejun Heo
• Re: [PATCH 08/10] block: cleanup rq->data_len usages
  • From: Tejun Heo
• Re: [PATCH 1/2] Added support for Designware SATA controller driver
  • From: Jeff Garzik
• Re: [PATCH 1/2] Added support for Designware SATA controller driver
  • From: Wolfgang Denk
• Re: [PATCH 2/2] Added AMCC 460EX Canyonlands SATA support.
  • From: Grant Likely
• Re: [PATCH 1/2] Added support for Designware SATA controller driver
  • From: Scott Wood
• [PATCH 0/2] Added support for Designware SATA controller driver
  • From: Feng Kan
• [PATCH 2/2] Added AMCC 460EX Canyonlands SATA support.
  • From: Feng Kan
• [PATCH 1/2] Added support for Designware SATA controller driver
  • From: Feng Kan
• [PATCH 3/3] ide-atapi: switch to rq->resid_len
  • From: Borislav Petkov
• [PATCH 2/3] ide-atapi: switch to blk_rq_bytes() on do_request() path
  • From: Borislav Petkov
• [RFC PATCH 0/3] ide-atapi cleanups
  • From: Borislav Petkov
• [PATCH 1/3] ide-tape: fix potential fs requests bug
  • From: Borislav Petkov
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
  • From: Jens Axboe
• Re: [PATCH 08/10] block: cleanup rq->data_len usages
  • From: Jens Axboe
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Matthew Wilcox
• Re: [PATCH 1/2] Add support for Designware SATA controller driver
  • From: Jeff Garzik
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Matthew Garrett
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Theodore Tso
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Matthew Wilcox
• Re: [PATCH 1/2] Add support for Designware SATA controller driver
  • From: Benjamin Herrenschmidt
• Re: [PATCH 1/2] Add support for Designware SATA controller driver
  • From: Jeff Garzik
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Robert Hancock
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Theodore Tso
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Robert Hancock
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Robert Hancock
• Re: Implementing NVMHCI...
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: Jörn Engel
• Re: How to assess PMP register
  • From: Mark Lord
• [PATCH] ide: remove driver_data direct access of struct device
  • From: Greg Kroah-Hartman
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Dan Williams
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Jeff Garzik
• Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
  • From: Adrian McMenamin
• [git pull] IDE fix
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
  • From: Bartlomiej Zolnierkiewicz
• Re: How to assess PMP register
  • From: Grant Grundler
• Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
  • From: Bartlomiej Zolnierkiewicz
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Matthew Garrett
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Henrique de Moraes Holschuh
• Re: [PATCH 08/10] block: cleanup rq->data_len usages
  • From: James Bottomley
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Matthew Wilcox
• Re: [PATCH 08/10] block: cleanup rq->data_len usages
  • From: Boaz Harrosh
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Alan Cox
• Re: [PATCH 07/10] block: drop request->hard_* and *nr_sectors
  • From: Boaz Harrosh
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Theodore Tso
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Theodore Tso
• Re: [PATCH 03/10] block: add rq->resid_len
  • From: Tejun Heo
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Tejun Heo
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Alex Buell
• Re: [PATCH 03/10] block: add rq->resid_len
  • From: Borislav Petkov
• Re: [PATCH 03/10] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCH 03/10] block: add rq->resid_len
  • From: Borislav Petkov
• Re: [PATCH] m68k: Atari - leave out spurious request_irq for Falcon IDE
  • From: Michael Schmitz
• Re: [PATCH 02/10] ide-tape: don't initialize rq->sector for rw requests
  • From: Borislav Petkov
• Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
  • From: Jeff Garzik
• Re: [PATCH 03/10] block: add rq->resid_len
  • From: Tejun Heo
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Tejun Heo
• How to assess PMP register
  • From: s ticket
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Jeff Garzik
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Tejun Heo
• Re: [PATCH 1/2] Add support for Designware SATA controller driver
  • From: Mark Miesfeld
• Re: [PATCH 1/2] Add support for Designware SATA controller driver
  • From: Wolfgang Denk
• [PATCH 1/2] Add support for Designware SATA controller driver
  • From: Feng Kan
• Re: Delay on intialization ide subsystem(most likely)
  • From: Andrey Gusev
• Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
  • From: Grant Likely
• Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
  • From: Grant Likely
• Re: [PATCH 03/10] block: add rq->resid_len
  • From: James Bottomley
• Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
  • From: Stephen Rothwell
• Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
  • From: Tejun Heo
• Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
  • From: Tejun Heo
• Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
  • From: Geert Uytterhoeven
• Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
  • From: Geert Uytterhoeven
• [PATCH 03/10] block: add rq->resid_len
  • From: Tejun Heo
• [PATCH 06/10] ide: convert to rq pos and nr_sectors accessors
  • From: Tejun Heo
• [GIT PATCH] block,scsi,ide: unify sector and data_len
  • From: Tejun Heo
• [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
  • From: Tejun Heo
• [PATCH 10/10] block: hide request sector and data_len
  • From: Tejun Heo
• [PATCH 08/10] block: cleanup rq->data_len usages
  • From: Tejun Heo
• [PATCH 05/10] block: convert to pos and nr_sectors accessors
  • From: Tejun Heo
• [PATCH 07/10] block: drop request->hard_* and *nr_sectors
  • From: Tejun Heo
• [PATCH 02/10] ide-tape: don't initialize rq->sector for rw requests
  • From: Tejun Heo
• [PATCH 01/10] nbd: don't clear rq->sector and nr_sectors unnecessarily
  • From: Tejun Heo
• [PATCH 09/10] ide: cleanup rq->data_len usages
  • From: Tejun Heo
• Re: [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
  • From: Borislav Petkov
• Re: ATA taskfile register returns 0xd0 on resume.
  • From: Tejun Heo
• Re: ATA taskfile register returns 0xd0 on resume.
  • From: manoj . iyer
• Re: [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
  • From: Helge Deller
• [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
  • From: Borislav Petkov
• Re: [PATCH] ata_piix: ICH7 does not support correct MWDMA timings
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
  • From: Jeff Garzik
• Re: [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
  • From: Mark Lord
• Re: [PATCH #upstream] ahci: misc cleanups for EM stuff
  • From: David Milburn
• Re: [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
  • From: Sergei Shtylyov
• Re[2]: Delay on intialization ide subsystem(most likely)
  • From: Андрей Гусев
• Re: [PATCH] m68k: Atari - leave out spurious request_irq for Falcon IDE
  • From: Geert Uytterhoeven
• Re: [GIT PATCH linux-2.6-block#for-linus] block: fix hd and mg_disk
  • From: Jens Axboe
• [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
  • From: Tejun Heo
• [PATCH 1/3] mg_disk: fix locking
  • From: Tejun Heo
• [GIT PATCH linux-2.6-block#for-linus] block: fix hd and mg_disk
  • From: Tejun Heo
• [PATCH 3/3] hd: fix locking
  • From: Tejun Heo
• [PATCH #upstream] ahci: misc cleanups for EM stuff
  • From: Tejun Heo
• Re: Delay on intialization ide subsystem(most likely)
  • From: Bartlomiej Zolnierkiewicz
• Re: Delay on intialization ide subsystem(most likely)
  • From: Andrey Gusev
• [PATCH] alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
  • From: Anton Vorontsov
• [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
  • From: Borislav Petkov
• Re: [PATCH] Fix Trivial Warnining in drivers/ata/libata-scsi.c
  • From: Subrata Modak
• Re: [PATCH] Fix Trivial Warnining in drivers/ata/libata-scsi.c
  • From: Jeff Garzik
• [PATCH] Fix Trivial Warnining in drivers/ata/libata-scsi.c
  • From: Subrata Modak
• Re: [PATCH] libata: fix suspend/resume for ATA SEMB devices
  • From: Tejun Heo
• Re: Delay on intialization ide subsystem(most likely)
  • From: Andrey Gusev
• [PATCH] libata: fix suspend/resume for ATA SEMB devices
  • From: Borislav Petkov
• Re: [PATCH 2/3] mg_disk: fix dependency on libata
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] mg_disk: fix dependency on libata
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] mg_disk: fix dependency on libata
  • From: Jeff Garzik
• Re: [PATCH 2/3] mg_disk: fix dependency on libata
  • From: Tejun Heo
• Re: [PATCH 3/3] mg_disk: use defines from <linux/ata.h>
  • From: Jeff Garzik
• Re: [PATCH 2/3] mg_disk: fix dependency on libata
  • From: Jeff Garzik
• Re: [PATCH 2/3] mg_disk: fix dependency on libata
  • From: Jeff Garzik
• Re: [PATCH] MAINTAINERS: update IDE entry
  • From: Tejun Heo
• Re: Errors on ICH10R with Seagate HDDs
  • From: Tejun Heo
• [Bug 13120] BUG: using rootfstype=ext4 causes oops
  • From: bugzilla-daemon
• [Bug 13120] BUG: using rootfstype=ext4 causes oops
  • From: bugzilla-daemon
• Re: Delay on intialization ide subsystem(most likely)
  • From: Bartlomiej Zolnierkiewicz
• Delay on intialization ide subsystem(most likely)
  • From: Andrey Gusev
• Re: Errors on ICH10R with Seagate HDDs
  • From: Thomas Jackowski
• Re: [PATCH] MAINTAINERS: update IDE entry
  • From: Borislav Petkov
• Re: Stop disks on reboot for laptop which cuts power
  • From: Bruno Prémont
• Re: Implementing NVMHCI...
  • From: Pavel Machek
• Re: ATA taskfile register returns 0xd0 on resume.
  • From: Tejun Heo
• Re: [PATCH] MAINTAINERS: update IDE entry
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] MAINTAINERS: update IDE entry
  • From: Borislav Petkov
• Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
  • From: Martin K. Petersen
• Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
  • From: Martin K. Petersen
• Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
  • From: Martin K. Petersen
• Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
  • From: Matthew Wilcox
• Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
  • From: Carl Henrik Lunde
• Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
  • From: Jeff Garzik
• [PATCH] ata_piix: ICH7 does not support correct MWDMA timings
  • From: Alan Cox
• Re: [PATCH 8 of 9] libata: Report disk alignment and physical block size
  • From: Matthew Wilcox
• Re: [PATCH 9 of 9] libata: Media rotation rate and form factor heuristics
  • From: Matthew Wilcox
• Re: [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
  • From: Kay Sievers
• Re: [patch] Enable parallel scan on ata_piix
  • From: Alan Cox
• Re: [patch] Enable parallel scan on ata_piix
  • From: Jeff Garzik
• Re: [patch] Enable parallel scan on ata_piix
  • From: Alan Cox
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Stefan Richter
• Re: [PATCH] MAINTAINERS: update IDE entry
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch] Enable parallel scan on ata_piix
  • From: Jeff Garzik
• Re: [PATCH] MAINTAINERS: update IDE entry
  • From: Sergei Shtylyov
• Re: [PATCH 7 of 9] scsi_debug: Add support for physical block exponent and alignment
  • From: Martin K. Petersen
• Re: [PATCH 7 of 9] scsi_debug: Add support for physical block exponent and alignment
  • From: Douglas Gilbert
• [PATCH 9 of 9] libata: Media rotation rate and form factor heuristics
  • From: Martin K. Petersen
• [PATCH 7 of 9] scsi_debug: Add support for physical block exponent and alignment
  • From: Martin K. Petersen
• [PATCH 8 of 9] libata: Report disk alignment and physical block size
  • From: Martin K. Petersen
• [PATCH 5 of 9] sd: Detect non-rotational devices
  • From: Martin K. Petersen
• [PATCH 6 of 9] sd: Block limits VPD support
  • From: Martin K. Petersen
• [PATCH 3 of 9] MD: Use new topology calls to indicate alignment and I/O sizes
  • From: Martin K. Petersen
• [PATCH 2 of 9] block: Export I/O topology for block devices and partitions
  • From: Martin K. Petersen
• [PATCH 4 of 9] sd: Physical block size and alignment support
  • From: Martin K. Petersen
• [PATCH 1 of 9] block: Expose stacked device queues in sysfs
  • From: Martin K. Petersen
• [PATCH 0 of 9] I/O topology patch kit
  • From: Martin K. Petersen
• [patch] Enable parallel scan on ata_piix
  • From: Arjan van de Ven
• ATA taskfile register returns 0xd0 on resume.
  • From: manoj . iyer
• Re: Frequent Head Unload Problem
  • From: Gavin Cameron
• [git pull] IDE fixes (updated)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] MAINTAINERS: update IDE entry
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4 of 8] sd: Physical block size and alignment support
  • From: Martin K. Petersen
• Re: [PATCH 4 of 8] sd: Physical block size and alignment support
  • From: Konrad Rzeszutek
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Matthew Wilcox
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Martin K. Petersen
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Ric Wheeler
• Re: [PATCH 4 of 8] sd: Physical block size and alignment support
  • From: Martin K. Petersen
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Konrad Rzeszutek
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: James Bottomley
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Grant Grundler
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: James Bottomley
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Matthew Wilcox
• Re: [PATCH 4 of 8] sd: Physical block size and alignment support
  • From: Konrad Rzeszutek
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Jeff Garzik
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Matthew Wilcox
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: James Bottomley
• Re: [PATCH 8 of 8] libata: Report disk alignment and physical block size
  • From: Martin K. Petersen
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Jeff Garzik
• Re: [PATCH 8 of 8] libata: Report disk alignment and physical block size
  • From: Matthew Wilcox
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Matthew Wilcox
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Matthew Wilcox
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Martin K. Petersen
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Martin K. Petersen
• Re: [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Jens Axboe
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Jeff Garzik
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Jens Axboe
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Matthew Wilcox
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Matthew Wilcox
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Jeff Garzik
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Jens Axboe
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Jeff Garzik
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Jeff Garzik
• Re: [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Jens Axboe
• Re: [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Jens Axboe
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Jens Axboe
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Jeff Garzik
• Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
  • From: Andy Isaacson
• Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
  • From: Robert Hancock
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Jens Axboe
• [PATCH 2 of 8] block: Export I/O topology for block devices and partitions
  • From: Martin K. Petersen
• [PATCH 8 of 8] libata: Report disk alignment and physical block size
  • From: Martin K. Petersen
• [PATCH 6 of 8] sd: Block limits VPD support
  • From: Martin K. Petersen
• [PATCH 4 of 8] sd: Physical block size and alignment support
  • From: Martin K. Petersen
• [PATCH 3 of 8] MD: Use new topology calls to indicate alignment and I/O sizes
  • From: Martin K. Petersen
• [PATCH 7 of 8] scsi_debug: Add support for physical block exponent and alignment
  • From: Martin K. Petersen
• [PATCH 1 of 8] block: Expose stacked device queues in sysfs
  • From: Martin K. Petersen
• [PATCH 5 of 8] sd: Detect non-rotational devices
  • From: Martin K. Petersen
• [PATCH 0 of 8] I/O topology patch kit
  • From: Martin K. Petersen
• [PATCH #upstream-fixes] libata: clear ering on resume
  • From: Tejun Heo
• Re: [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
  • From: David Brownell
• Re: [git pull] IDE fixes
  • From: Ray Lee
• Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
  • From: Andrew Morton
• Re: [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
  • From: David Brownell
• Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
  • From: David Brownell
• Re: [git pull] IDE fixes
  • From: Joe Perches
• Re: [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: James Bottomley
• Re: [git pull] IDE fixes
  • From: Sam Ravnborg
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Grant Grundler
• Re: [git pull] IDE fixes
  • From: Joe Perches
• [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide: Stop disks on reboot for laptop which cuts power
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 2.6.30-rc2 2/2] palm_bk3710: UDMA performance fix
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Jeff Garzik
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Jeff Garzik
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Jeff Garzik
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: Alan Cox
• Re: [PATCH] libata: rewrite SCSI host scheme to be one per ATA host
  • From: James Bottomley