Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Theodore Tso wrote:
On Thu, Apr 30, 2009 at 07:34:45AM -0400, Theodore Tso wrote:
On Thu, Apr 30, 2009 at 08:33:09AM +0100, Alex Buell wrote:
On Wed, 29 Apr 2009 22:27:46 -0400, I waved a wand and this message
magically appears in front of Jeff Garzik:

As Tejun noted, try switching to AHCI mode in BIOS.
But is there a way to switch modes without needing to go through the
BIOS? Some laptops won't let you do that through BIOS.
The BIOS setting already is in AHCI mode, and not in "compatibility
mode".

Thinking about this a bit more, I'll bet the problem is the BIOS
setting is only affecting the primary SATA ports (which are being
grabed by ahci) and not the SATA port in the Ultrabay slot (which is
being picked up by either the ata_piix or piix driver).  Sigh...

dmesg and lspci -vv output might be useful..
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux