Linux IDE Archive
[Prev Page][Next Page]
- [PATCH 27/29] drivers/ata/sata_rcar.c: simplify use of devm_ioremap_resource
- Re: System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset.
- System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset.
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v3 3/3] libata: Add support for queued DSM TRIM
- Re: [PATCH v3 3/3] libata: Add support for queued DSM TRIM
- Re: [PATCH v3 2/3] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Can I add SAMSUNG HN-M101MBB to wiki for heavy head unloads?
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- RE: [PATCH v2] Hard disk S3 resume time optimization
- RE: [PATCH v2] Hard disk S3 resume time optimization
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: SATA PMP issue
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH v2] Hard disk S3 resume time optimization
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH v2 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH v3 3/5] devicetree: create a separate binding description for sata_highbank
- Re: [PATCH v3 3/5] devicetree: create a separate binding description for sata_highbank
- Re: [PATCH v3 3/5] devicetree: create a separate binding description for sata_highbank
- Re: [PATCH v3 3/5] devicetree: create a separate binding description for sata_highbank
- Re: [PATCH v3 2/5] sata highbank: enable 64-bit DMA mask when using LPAE
- Re: [PATCH v3 1/5] sata, highbank: fix ordering of SGPIO signals
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: SATA PMP issue
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH 1/2] ata: pata_arasan: Staticize local symbols
- Re: [PATCH 2/2] ata: pata_samsung_cf: add missing __iomem annotation
- Re: [PATCH v3 3/3] libata: Add support for queued DSM TRIM
- Re: [PATCH v3 3/3] libata: Add support for queued DSM TRIM
- Re: [PATCH v3 2/3] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- Re: [PATCH v2] Hard disk S3 resume time optimization
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH 1/2] ata: pata_arasan: Staticize local symbols
- [PATCH 2/2] ata: pata_samsung_cf: add missing __iomem annotation
- [PATCH 1/2] ata: pata_arasan: Staticize local symbols
- [PATCH v3 3/3] libata: Add support for queued DSM TRIM
- [PATCH v3 2/3] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- [PATCH v3 1/3] libata: Populate host-to-device FIS "auxiliary" field
- [PATCH v3 0/3] Introduce new SATA queued commands
- [PATCH v2] Hard disk S3 resume time optimization
- Re: [PATCH v2 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH v2 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH v2 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH v2 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH v2 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH v3 3/5] devicetree: create a separate binding description for sata_highbank
- [PATCH RESEND v2 2/2] libata: Add support for queued DSM TRIM
- [PATCH RESEND v2 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- [PATCH RESEND v2 0/2] Introduce new SATA queued commands
- [PATCH v2 2/2] libata: Add support for queued DSM TRIM
- [PATCH v2 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- [PATCH v2 0/2] Introduce new SATA queued commands
- SATA PMP issue
- Re: [PATCH v3 3/5] devicetree: create a separate binding description for sata_highbank
- [PATCH v3 3/5] devicetree: create a separate binding description for sata_highbank
- [PATCH v3 4/5] sata, highbank: set tx_atten override bits
- [PATCH v3 5/5] sata, highbank: send extra clock cycles in SGPIO patterns
- [PATCH v3 2/5] sata highbank: enable 64-bit DMA mask when using LPAE
- [PATCH v3 1/5] sata, highbank: fix ordering of SGPIO signals
- [PATCH 2/2] ide: sgiioc4: Staticize ioc4_ide_attach_one()
- [PATCH 1/2] ide: palm_bk3710: add missing __iomem annotation
- Re: SATA backplane activity LEDs
- Re: libata / IDE cs5536: 80c cable detect issue (and worse?)
- From: Bartlomiej Zolnierkiewicz
- SATA backplane activity LEDs
- [GIT PULL] libata fixes for 3.11-rc4
- Re: [PATCH] Add HDIO_DRIVE_RESET ioctl to libata.
- Re: [PATCH 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- Re: [PATCH 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- [PATCH 2/2] libata: Add support for queued DSM TRIM
- [PATCH 1/2] libata: Add support for SEND/RECEIVE FPDMA QUEUED
- [PATCH 0/2] Introduce new SATA queued commands
- [PATCH] Add HDIO_DRIVE_RESET ioctl to libata.
- Re: [PATCH v2 3/5] devicetree: create a separate binding description for sata_highbank
- Re: [PATCH v2 3/5] devicetree: create a separate binding description for sata_highbank
- Re: [PATCH 1/5] sata, highbank: fix ordering of SGPIO signals
- RE: [PATCH] Hard disk S3 resume time optimization
- Re: [PATCH] Hard disk S3 resume time optimization
- RE: [PATCH] Hard disk S3 resume time optimization
- [PATCH v2 3/5] devicetree: create a separate binding description for sata_highbank
- [PATCH v2 2/5] sata highbank: enable 64-bit DMA mask when using LPAE
- [PATCH v2 4/5] sata, highbank: set tx_atten override bits
- [PATCH v2 5/5] sata, highbank: send extra clock cycles in SGPIO patterns
- [PATCH v2 1/5] sata, highbank: fix ordering of SGPIO signals
- Re: [PATCH 4/5] sata, highbank: set tx_atten override bits
- Re: [PATCH 1/5] sata, highbank: fix ordering of SGPIO signals
- Re: [PATCH libata/for-3.11-fixes] libata: make it clear that sata_inic162x is experimental
- Re: [PATCH] Hard disk S3 resume time optimization
- [PATCH] Hard disk S3 resume time optimization
- Re: [PATCH libata/for-3.11-fixes] libata: make it clear that sata_inic162x is experimental
- [PATCH updated] ACPI / PM: Add state information in error message for acpi_device_set_power
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH 1/3] ACPI / PM: Only set power states of devices that are power manageable
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 1/3] ACPI / PM: Only set power states of devices that are power manageable
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH 4/5] sata, highbank: set tx_atten override bits
- Re: [PATCH 1/3] ACPI / PM: Only set power states of devices that are power manageable
- Re: [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
- Re: [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
- Re: [PATCH 26/35] ata: use dev_get_platdata()
- [PATCH 27/35] ide: use dev_get_platdata()
- [PATCH 26/35] ata: use dev_get_platdata()
- Re: [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
- [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
- Re: [PATCH 1/3] ACPI / PM: Only set power states of devices that are power manageable
- Re: [PATCH 1/3] ACPI / PM: Only set power states of devices that are power manageable
- Re: [PATCH] ATA: sata_mv: Remove uneeded CONFIG_HAVE_CLK ifdefs
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH] ATA: sata_mv: Remove uneeded CONFIG_HAVE_CLK ifdefs
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH 1/5] sata, highbank: fix ordering of SGPIO signals
- Re: [PATCH libata/for-3.11-fixes] libata: make it clear that sata_inic162x is experimental
- Re: [PATCH] ATA: sata_mv: Remove uneeded CONFIG_HAVE_CLK ifdefs
- Re: [PATCH] pata_imx: expose module alias for loading from device-tree
- Re: [PATCH] ATA: sata_mv: Remove uneeded CONFIG_HAVE_CLK ifdefs
- Re: [PATCH] ATA: sata_mv: Remove unneeded forward declaration
- [PATCH] ATA: sata_mv: Remove uneeded CONFIG_HAVE_CLK ifdefs
- [PATCH] ATA: sata_mv: Remove unneeded forward declaration
- Re: [PATCH 3/3] ACPI / PM: Use ACPI_STATE_D3_COLD instead of ACPI_STATE_D3 everywhere
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 1/3] ACPI / PM: Only set power states of devices that are power manageable
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- [PATCH] pata_imx: expose module alias for loading from device-tree
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- [PATCH 0/3] ACPI / PM: Device PM cleanups
- [PATCH 1/3] ACPI / PM: Only set power states of devices that are power manageable
- [PATCH 3/3] ACPI / PM: Use ACPI_STATE_D3_COLD instead of ACPI_STATE_D3 everywhere
- [PATCH 2/3] ACPI / PM: Make messages in acpi_device_set_power() print device names
- Re: [RFC PATCH 2/2] ata: acpi: rework the ata acpi bind support
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: SATA hotplug not detecting new disks
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH 4/5] sata, highbank: set tx_atten override bits
- Re: [PATCH 5/5] sata, highbank: send extra clock cycles in SGPIO patterns
- Re: SATA hotplug not detecting new disks
- Re: [PATCH 5/5] sata, highbank: send extra clock cycles in SGPIO patterns
- Re: [PATCH 4/5] sata, highbank: set tx_atten override bits
- Re: [PATCH 5/5] sata, highbank: send extra clock cycles in SGPIO patterns
- Re: [PATCH 3/5] devicetree: create a separate binding description for sata_highbank
- [PATCH 5/5] sata, highbank: send extra clock cycles in SGPIO patterns
- [PATCH 3/5] devicetree: create a separate binding description for sata_highbank
- [PATCH 1/5] sata, highbank: fix ordering of SGPIO signals
- [PATCH 4/5] sata, highbank: set tx_atten override bits
- [PATCH 2/5] sata highbank: enable 64-bit DMA mask when using LPAE
- Re: [GIT PULL] libata changes for v3.11-rc2
- [PATCH] ahci_imx: depend on CONFIG_MFD_SYSCON
- Re: [PATCH libata/for-3.11-fixes] libata: make it clear that sata_inic162x is experimental
- Re: [RFC PATCH 2/2] ata: acpi: rework the ata acpi bind support
- Re: linux-next: Tree for Jul 25 (ahci_imx.c)
- [v9 3/3] ahci_imx: add ahci sata support on imx platforms
- [v9 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- [v9 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [PATCH v9 0/3] ahci: enable ahci sata support on imx6q
- Re: linux-next: Tree for Jul 25 (ahci_imx.c)
- RE: linux-next: Tree for Jul 25 (ahci_imx.c)
- Re: [PATCH libata/for-3.11-fixes] libata: make it clear that sata_inic162x is experimental
- Re: linux-next: Tree for Jul 25 (ahci_imx.c)
- RE: linux-next: Tree for Jul 25 (ahci_imx.c)
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: SATA hotplug not detecting new disks
- Re: [RFC PATCH 2/2] ata: acpi: rework the ata acpi bind support
- SATA hotplug not detecting new disks
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: linux-next: Tree for Jul 25 (ahci_imx.c)
- [GIT PULL] libata changes for v3.11-rc2
- Re: [RFC PATCH 2/2] ata: acpi: rework the ata acpi bind support
- Re: [RFC PATCH 1/2] ata: acpi: remove dead code for ata_acpi_(un)bind
- [PATCH] ide-disk_proc: use macro to replace magic number
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- [RFC PATCH 2/2] ata: acpi: rework the ata acpi bind support
- [RFC PATCH 1/2] ata: acpi: remove dead code for ata_acpi_(un)bind
- [RFC PATCH 0/2] Rework ATA ACPI binding code
- RE: [v8 3/3] ahci_imx: add ahci sata support on imx platforms
- Re: [v8 3/3] ahci_imx: add ahci sata support on imx platforms
- [v8 3/3] ahci_imx: add ahci sata support on imx platforms
- [v8 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- [v8 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [PATCH v8 0/3] ahci: enable ahci sata support on imx6q
- RE: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [PATCH v2] AHCI: fix Null pointer dereference in achi_host_active()
- [PATCH v2] AHCI: fix Null pointer dereference in achi_host_active()
- Re: [PATCH] AHCI: fix Null pointer dereference in achi_host_active()
- Re: [PATCH] AHCI: fix Null pointer dereference in achi_host_active()
- [PATCH libata/for-3.11-fixes] libata: make it clear that sata_inic162x is experimental
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH] libata: Add additional queued command opcodes from SATA spec
- Re: [PATCH] libata: Add additional queued command opcodes from SATA spec
- Re: [PATCH] libata: Add additional queued command opcodes from SATA spec
- Re: [PATCH] libata: replace strict_strtol() with kstrtol()
- Re: [PATCH] libata: Add additional queued command opcodes from SATA spec
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- RE: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- Re: DMA timeouts with JM20330 based SATA<->IDE bridge
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- [PATCH] libata: Add additional queued command opcodes from SATA spec
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: Re: libata / IDE cs5536: 80c cable detect issue (and worse?)
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: Re: libata / IDE cs5536: 80c cable detect issue (and worse?)
- From: Bartlomiej Zolnierkiewicz
- Re: Re: libata / IDE cs5536: 80c cable detect issue (and worse?)
- Re: Re: libata / IDE cs5536: 80c cable detect issue (and worse?)
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide: replace strict_strtol() with kstrtol()
- [PATCH] libata: replace strict_strtol() with kstrtol()
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: libata / IDE cs5536: 80c cable detect issue (and worse?)
- libata / IDE cs5536: 80c cable detect issue (and worse?)
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- [PATCH] AHCI: fix Null pointer dereference in achi_host_active()
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH] ata: Fix DVD not dectected at some platform with Wellsburg PCH
- Re: [PATCH] ata: Fix DVD not dectected at some platform with Wellsburg PCH
- Re: [PATCH] AHCI: fix Null pointer dereference in achi_host_active()
- Re: [PATCH] libata: move 'struct ata_taskfile' and friends from ata.h to libata.h
- RE: [v7 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- Re: [v7 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- RE: [v7 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- [PATCH] AHCI: fix Null pointer dereference in achi_host_active()
- Re: [v7 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- Re: [v7 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [v7 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [v7 3/3] sata: imx: add ahci sata support on imx platforms
- [v7 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- [v7 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [PATCH v7 0/3] ahci: enable ahci sata support on imx6q
- Re: ahci_host_activate NULL pointer (was Re: Linux 3.11-rc1)
- Re: ahci_host_activate NULL pointer (was Re: Linux 3.11-rc1)
- Re: ahci_host_activate NULL pointer (was Re: Linux 3.11-rc1)
- Re: Linux Plumbers IO & File System Micro-conference
- Re: ahci_host_activate NULL pointer (was Re: Linux 3.11-rc1)
- Re: ahci_host_activate NULL pointer (was Re: Linux 3.11-rc1)
- Re: ahci_host_activate NULL pointer (was Re: Linux 3.11-rc1)
- ahci_host_activate NULL pointer (was Re: Linux 3.11-rc1)
- RE: [v6 3/3] sata: imx: add ahci sata support on imx platforms
- RE: [v6 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- Re: [v6 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- Re: [v6 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- RE: Linux Plumbers IO & File System Micro-conference
- Linux Plumbers IO & File System Micro-conference
- [v6 3/3] sata: imx: add ahci sata support on imx platforms
- [v6 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- [v6 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [PATCH v6 0/3] ahci: enable ahci sata support on imx6q
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- RE: [v5 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [v5 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- From: Nicholas A. Bellinger
- [PATCH] ata: Fix DVD not dectected at some platform with Wellsburg PCH
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- [PATCH v5 0/3] ahci: enable ahci sata support on imx6q
- [v5 3/3] sata: imx: add ahci sata support on imx platforms
- [v5 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [v5 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- RE: [v4 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [v4 3/3] sata: imx: add ahci sata support on imx platforms
- RE: [v4 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [v4 3/3] sata: imx: add ahci sata support on imx platforms
- [GIT] IDE
- Re: [PATCH v2] ide: Fix IDE PIO size calculation
- [v4 3/3] sata: imx: add ahci sata support on imx platforms
- [v4 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- [v4 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [PATCH v4 0/3] ahci: enable ahci sata support on imx6q
- Re: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- RE: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- RE: Re[2]: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- RE: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- Re[2]: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- Re: [v3 3/3] sata: imx: add ahci sata support on imx platforms
- [v3 3/3] sata: imx: add ahci sata support on imx platforms
- [v3 2/3] ARM: imx6q: update the sata bits definitions of gpr13
- [v3 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [PATCH v3 0/3] ahci: enable ahci sata support on imx6q
- [GIT PULL] libata changes for v3.11-rc1
- [PATCH] ata: Fix DVD not dectected at some platform with Wellsburg PCH
- RE: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- RE: [v2 1/4] ARM: dtsi: enable ahci sata on imx6q platforms
- RE: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 2/4] imx: ahci: enable ahci sata on imx6q platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- RE: [v2 2/4] imx: ahci: enable ahci sata on imx6q platforms
- Re: [v2 1/4] ARM: dtsi: enable ahci sata on imx6q platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: SATA hdd refuses to reallocate a sector?
- From: Henrique de Moraes Holschuh
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 2/4] imx: ahci: enable ahci sata on imx6q platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- Re: [v2 4/4] sata: imx: add ahci sata support on imx platforms
- [PATCH v2 0/4] ahci: enable ahci sata support on imx6q
- [v2 4/4] sata: imx: add ahci sata support on imx platforms
- [v2 3/4] ARM: imx6q: update the sata bits definitions of gpr13
- [v2 2/4] imx: ahci: enable ahci sata on imx6q platforms
- [v2 1/4] ARM: dtsi: enable ahci sata on imx6q platforms
- Re: Data corruption when using INIC-1623TA2 controller
- From: Martin Braure de Calignon
- Re: Data corruption when using INIC-1623TA2 controller
- [PATCH] libata: move 'struct ata_taskfile' and friends from ata.h to libata.h
- Re: SATA hdd refuses to reallocate a sector?
- Data corruption when using INIC-1623TA2 controller
- Re: SATA hdd refuses to reallocate a sector?
- From: Henrique de Moraes Holschuh
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- From: Henrique de Moraes Holschuh
- Re: [PATCH] libata-zpodd: must use ata_tf_init()
- Re: [PATCH] libata-zpodd: must use ata_tf_init()
- Re: DMA timeouts with JM20330 based SATA<->IDE bridge
- [PATCH] ata: Fix DVD not dectected at some platform with Wellsburg PCH
- Re: [PATCH] libata-zpodd: must use ata_tf_init()
- Re: [PATCH] libata-zpodd: must use ata_tf_init()
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: [PATCH] libata-zpodd: must use ata_tf_init()
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: [PATCH V2] ahci: sata: add support for exynos5440 sata
- Re: [PATCH v2] AHCI: use ATA_BUSY
- Re: [PATCH] libata-zpodd: must use ata_tf_init()
- Re: AHCI and SSS
- AHCI and SSS
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: [PATCH] libata-zpodd: must use ata_tf_init()
- [PATCH] libata-zpodd: must use ata_tf_init()
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- Re: SATA hdd refuses to reallocate a sector?
- SATA hdd refuses to reallocate a sector?
- [PATCH v2] AHCI: use ATA_BUSY
- Re: [PATCH] ahci: use ATA_BUSY
- [PATCH] ahci: use ATA_BUSY
- Re: [PATCH 2/4] ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs
- Re: [PATCH 1/4] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- [PATCH v2] ide: Fix IDE PIO size calculation
- Re: [PATCH] ide: Fix IDE PIO size calculation
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- [PATCH] ide: Fix IDE PIO size calculation
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- [PATCH 2/4] ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs
- [PATCH 1/4] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs
- RE: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
- Re: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
- Re: [PATCH v2] ata: cleanup SAT error translation
- [PATCH v2] ata: cleanup SAT error translation
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
- RE: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
- Re: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
- Re: [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
- RE: [v1 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- RE: [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
- Re: [v1 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- Re: [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: [PATCH] ata: cleanup SAT error translation
- Re: [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
- Re: [PATCH V2] ahci: sata: add support for exynos5440 sata
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: troubleshoot disk problems / libata error messages
- Re: troubleshoot disk problems / libata error messages
- [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
- [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
- [v1 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
- [PATCH V1 0/3] ahci: enable ahci sata support on imx6q
- Re: [PATCH] libata: remove dead code from libata-acpi.c
- Re: troubleshoot disk problems / libata error messages
- troubleshoot disk problems / libata error messages
- [PATCH] libata: remove dead code from libata-acpi.c
- [PATCH] ata: cleanup SAT error translation
- [PATCH libata/for-3.10-fixes] libata: skip SRST for all SIMG [34]7x port-multipliers
- Re: [PATCH V2] ahci: sata: add support for exynos5440 sata
- Re: [PATCH] ahci: remove pmp link online check in FBS EH
- Re: [PATCH] ahci: remove pmp link online check in FBS EH
- [PATCH] ahci: remove pmp link online check in FBS EH
- Re: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
- RE: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
- Re: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
- RE: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
- Re: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
- Re: [PATCH 2/2 v4] sata highbank: add bit-banged SGPIO driver support
- [PATCH 2/2 v4] sata highbank: add bit-banged SGPIO driver support
- Re: [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
- AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
- AHCI bug?: a lockup in ahci_interrupt with fbs enabled pmp
- Re: [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
- [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
- Re: [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
- Re: [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
- Re: [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
- Re: [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
- RE: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
- Re: drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type
- Re: drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type
- RE: [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
- Re: drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type
- Re: drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type
- RE: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
- Re: [PATCH v4] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
- Re: [PATCH] sata_rcar: fix compilation warning in sata_rcar_thaw()
- Re: [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
- [PATCH] sata_rcar: fix compilation warning in sata_rcar_thaw()
- [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
- [PATCH v4] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH v3] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH RESEND v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
- Re: [PATCH V3] ata: use pci_get_drvdata()
- [PATCH V3] ata: use pci_get_drvdata()
- Re: [PATCH V2] ata: use pci_get_drvdata()
- Re: [PATCH V2] ata: use pci_get_drvdata()
- [PATCH V2] ata: use pci_get_drvdata()
- Re: [PATCH] sata_rcar: fix interrupt handling
- [GIT PULL] libata fixes for v3.10-rc4
- [PATCH RESEND v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
- [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
- [PATCH RESEND 1/3] pci_ids: put Hudson-2 device IDs together
- Re: [PATCH] sata_rcar: fix interrupt handling
- Re: [PATCH] sata_rcar: fix interrupt handling
- Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH] ipr: qc_fill_rtf() method should not store alternate status register
- Re: [PATCH] ata: use pci_{get,set}_drvdata()
- Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH v3] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH] sata_rcar: fix interrupt handling
- [PATCH] ata: use pci_{get,set}_drvdata()
- Re: [PATCH] sata_rcar: fix interrupt handling
- [PATCH] sata_rcar: fix interrupt handling
- Re: [PATCH] ipr: qc_fill_rtf() method should not store alternate status register
- Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
- [PATCH v3] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH] ipr: qc_fill_rtf() method should not store alternate status register
- Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
- [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
- RE: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
- RE: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH 1/3] pci_ids: put Hudson-2 device IDs together
- Re: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
- Re: [PATCH 1/3] pci_ids: put Hudson-2 device IDs together
- [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
- [PATCH 2/3] ahci: add AMD CZ SATA device ID
- [PATCH 1/3] pci_ids: put Hudson-2 device IDs together
- Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
- [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
- [PATCH 1/2] ahci: make ahci_transmit_led_message into a function pointer
- Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
- [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH] ata_piix: add PCI IDs for Intel BayTail
- Re: [PATCH] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH] ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
- Re: 88SE9172 additional PCI ID: 1b4b:9172
- Re: [PATCH] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH] ata: increase retry count but shorten duration for Calxeda controller
- [PATCH] ata: increase retry count but shorten duration for Calxeda controller
- Re: [PATCH] ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
- [PATCH] ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
- [PATCH] Use observed PCI ID for Marvell 88se9172 SATA controller.
- Re: 88SE9172 additional PCI ID: 1b4b:9172
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- Re: [PATCH 0/3] Optimize R-Car SATA driver
- Re: [PATCH 0/3] Optimize R-Car SATA driver
- Re: 88SE9172 additional PCI ID: 1b4b:9172
- Re: 88SE9172 additional PCI ID: 1b4b:9172
- Re: [PATCH 0/3] Optimize R-Car SATA driver
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- 88SE9172 additional PCI ID: 1b4b:9172
- [PATCH 3/3] sata_rcar: add 'base' local variable to some functions
- [PATCH 2/3] sata_rcar: correct 'sata_rcar_sht'
- [PATCH 1/3] sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg()
- [PATCH 0/3] Optimize R-Car SATA driver
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- [PATCH 07/24] drivers/ide/delkin_cb: Convert to module_pci_driver
- Re: [PATCH] libata: do not limit R-Car SATA driver to shmobile
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- Re: [PATCH v3 1/4] libata: add R-Car SATA driver
- Re: [PATCH] libata: do not limit R-Car SATA driver to shmobile
- Re: [PATCH] libata: do not limit R-Car SATA driver to shmobile
- [PATCH] libata: do not limit R-Car SATA driver to shmobile
- Re: [PATCH] ata: use platform_{get,set}_drvdata()
- Re: [PATCH] sata_rcar: clear STOP bit in bmdma_start() method
- [PATCH] ata: use platform_{get,set}_drvdata()
- Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- [PATCH v2] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH] sata_rcar: clear STOP bit in bmdma_start() method
- Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- [PATCH] AHCI: Make distinct names for ports in /proc/interrupts /proc/interrupts
- Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH] sata_rcar: clear STOP bit in bmdma_start() method
- [PATCH 2/2] libata: Add atapi_dmadir force flag
- [PATCH 1/2] libata: make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- [PATCH] ipr: qc_fill_rtf() method should not store alternate status register
- [PATCH] sata_rcar: clear STOP bit in bmdma_start() method
- [PATCH RESEND 1/1] AHCI: Make distinct names for ports in /proc/interrupts
- [PATCH RESEND 0/1] AHCI: Make distinct names for ports in /proc/interrupts
- [PATCH RESEND 1/1] AHCI: Optimize interrupt processing
- [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
- Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- From: Mauro Carvalho Chehab
- Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
- Re: [PATCH v2 1/2] ATA/SCSI subsystem resume path made fully asynchronous
- RE: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
- Re: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
- [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
- [PATCH v2 1/2] ATA/SCSI subsystem resume path made fully asynchronous
- [PATCH v2 0/2] Hard disk S3 resume time optimization
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] Hard disk S3 resume time optimization
- Re: [PATCH] Hard disk S3 resume time optimization
- [PATCH] Hard disk S3 resume time optimization
- Re: [PATCH] ata_piix: add PCI IDs for Intel BayTail
- Re: [PATCH] ata_piix: add PCI IDs for Intel BayTail
- [PATCH 01/33] drivers/ata: don't check resource with devm_ioremap_resource
- [PATCH] ata_piix: add PCI IDs for Intel BayTail
- Re: [PATCH V2 #for-3.10] libata: export ata_port port_no attribute via /sys
- Re: [PATCH v2] AHCI: Make distinct names for ports in /proc/interrupts
- Re: [PATCH libata/for-3.10-fixes] libata: update "Maintained by:" tags
- Re: [PATCH v2] AHCI: Make distinct names for ports in /proc/interrupts
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH v2] AHCI: Make distinct names for ports in /proc/interrupts
- [PATCH libata/for-3.10-fixes] libata: update "Maintained by:" tags
- Re: [PATCH V2 #for-3.10] libata: export ata_port port_no attribute via /sys
- [PATCH V2 #for-3.10] libata: export ata_port port_no attribute via /sys
- Re: [PATCH #for-3.10] libata: export ata_port port_no attribute via /sys
- Re: [PATCH] make ata_exec_internal_sg honor DMADIR
- Re: [PATCH] IDE: bugfix of IDE PIO size calculation
- [PATCH] IDE: bugfix of IDE PIO size calculation
- [RFC 01/42] drivers/ata: don't check resource with devm_ioremap_resource
- Re: linx-next: inclusion request for libata for-next branch
- [PATCH #for-3.10] libata: export ata_port port_no attribute via /sys
- Re: [GIT PULL] libata maintainership update
- Re: [GIT PULL] libata maintainership update
- [GIT PULL v2] libata maintainership update
- Re: [GIT PULL] libata maintainership update
- linx-next: inclusion request for libata for-next branch
- [GIT PULL] libata maintainership update
- [PATCH v2] AHCI: Make distinct names for ports in /proc/interrupts
- Re: [PATCH] ata: increase retry count but shorten duration for Calxeda controller
- Re: libata maintainership change
- Re: libata maintainership change
- From: Nicholas A. Bellinger
- Re: libata maintainership change
- Re: libata maintainership change
- libata maintainership change
- [PATCH] ata: increase retry count but shorten duration for Calxeda controller
- Re: [git patches] libata updates
- Re: [PATCH] sata_highbank: Rename proc_name to the module name
- Re: [PATCH 1/2] ata: acpi: make ata_ap_acpi_handle not block
- Re: [PATCH #upstream] libata: export ata_port port_no attribute via /sys
- [git patches] libata updates
- Re: [PATCH] AHCI: Make distinct names for ports in /proc/interrupts
- Re: [PATCH] sata_highbank: Rename proc_name to the module name
- [PATCH] sata_highbank: Rename proc_name to the module name
- Re: [PATCH] AHCI: Make distinct names for ports in /proc/interrupts
- [PATCH] AHCI: Make distinct names for ports in /proc/interrupts
- [PATCH 2/2] ACPI/libata: Restore libata.noacpi support
- [PATCH 1/2] ata: acpi: make ata_ap_acpi_handle not block
- Re: ahci driver cannot suspend a CF card, ata_piix can
- Re: ahci driver cannot suspend a CF card, ata_piix can
- Re: ahci driver cannot suspend a CF card, ata_piix can
- Re: [Bug 56781] New: BUG: scheduling while atomic: modprobe/256/0x00000100
- Re: [Bug 56781] New: BUG: scheduling while atomic: modprobe/256/0x00000100
- ahci driver cannot suspend a CF card, ata_piix can
- [PATCH V2] ahci: sata: add support for exynos5440 sata
- Re: [PATCH] ahci: sata: add support for exynos5440 sata
- Re: [PATCH] ahci: sata: add support for exynos5440 sata
- [PATCH] ahci: sata: add support for exynos5440 sata
- Intel SSD: NODEV after polling detection
- Re: [RFC PATCH] AHCI: Workaround for ATAPI on buggy AHCI controller
- Re: [RFC PATCH] AHCI: Workaround for ATAPI on buggy AHCI controller
- Re: [RFC PATCH] AHCI: Workaround for ATAPI on buggy AHCI controller
- [RFC PATCH] AHCI: Workaround for ATAPI on buggy AHCI controller
- Re: [PATCH] drivers: ata: rcar: use devm_ioremap_resource()
- [PATCH] drivers: ata: rcar: use devm_ioremap_resource()
- From: Silviu-Mihai Popescu
- Re: [PATCH v3 1/1] [libata] SCSI: really use SATL version in VPD
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]