Re: [PATCH V2 1/6] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 22, 2013 at 12:26:45PM -0700, Troy Kisky wrote:
> On 11/22/2013 4:04 AM, Marek Vasut wrote:
> >We must clear this IMX6Q_GPR13_SATA_MPLL_CLK_EN bit on i.MX6Q, otherwise
> >Linux will fail to find the attached drive on some boards.
> >
> >This entire fix was:
> >Reported-by: Eric Nelson <eric.nelson@xxxxxxxxxxxxxxxxxxx>
> >
> >Signed-off-by: Marek Vasut <marex@xxxxxxx>
> >Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
> >Cc: Richard Zhu <r65037@xxxxxxxxxxxxx>
> >Cc: Tejun Heo <tj@xxxxxxxxxx>
> >Cc: Linux-IDE <linux-ide@xxxxxxxxxxxxxxx>
> >---
> >  drivers/ata/ahci_imx.c | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> >
> >V2: Update the value in the comment from 0x7ffffffd to 0x7ffffffe
> >
> >diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
> >index ae2d73f..14227d1 100644
> >--- a/drivers/ata/ahci_imx.c
> >+++ b/drivers/ata/ahci_imx.c
> >@@ -113,7 +113,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
> >  	/*
> >  	 * set PHY Paremeters, two steps to configure the GPR13,
> >  	 * one write for rest of parameters, mask of first write
> >-	 * is 0x07fffffd, and the other one write for setting
> >+	 * is 0x07fffffe, and the other one write for setting
> 
> 0x07ffffff, d+2 = f,
> bit 1 is IMX6Q_GPR13_SATA_MPLL_CLK_EN, which you just added
> bit 0 is IMX6Q_GPR13_SATA_TX_EDGE_RATE, which is also in your expression

Ah, sorry.  The mistake comes from my wrong bit math.

Shawn

> 
> >  	 * the mpll_clk_en.
> >  	 */
> >  	regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
> >@@ -125,6 +125,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
> >  			| IMX6Q_GPR13_SATA_TX_BOOST_MASK
> >  			| IMX6Q_GPR13_SATA_TX_LVL_MASK
> >  			| IMX6Q_GPR13_SATA_TX_EDGE_RATE
> >+			| IMX6Q_GPR13_SATA_MPLL_CLK_EN
> >  			, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
> >  			| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
> >  			| IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux