Linux IDE Archive

• Thread Index

• [RFC PATCH] libata: sysfs naming option
  • From: Hannes Reinecke
• Re: [PATCHv3 00/68] libata: rework logging, take II
  • From: Hannes Reinecke
• Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
  • From: Paul Menzel
• Re: [PATCHv3 00/68] libata: rework logging, take II
  • From: Damien Le Moal
• Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
  • From: Damien Le Moal
• Re: [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
  • From: Damien Le Moal
• Re: [PATCH v3 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode
  • From: Sergei Shtylyov
• Re: [PATCHv3 00/68] libata: rework logging, take II
  • From: Hannes Reinecke
• Re: [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
  • From: Hannes Reinecke
• Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
  • From: Paul Menzel
• Re: [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
  • From: Paul Menzel
• Re: [PATCH 43/68] libata: drop ata_msg_info()
  • From: Damien Le Moal
• Re: [PATCHv3 00/68] libata: rework logging, take II
  • From: Damien Le Moal
• Re: [PATCH 65/68] libata-scsi: rework ata_dump_status to avoid using pr_cont()
  • From: Damien Le Moal
• Re: [PATCH 13/68] libata: revamp ata_get_cmd_descript()
  • From: Damien Le Moal
• Re: [PATCH 08/68] libata: tracepoints for bus-master DMA
  • From: Damien Le Moal
• Re: [PATCH 03/68] libata: Add ata_port_classify() helper
  • From: Damien Le Moal
• Re: [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
  • From: Damien Le Moal
• Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
  • From: Damien Le Moal
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle
• [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
  • From: Paul Menzel
• [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
  • From: Paul Menzel
• [PATCH v3 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode
  • From: Paul Menzel
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle
• Re: [PATCH 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
  • From: Damien Le Moal
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle
• Re: [PATCH v3 04/10] ata: pata_platform: Use platform_get_irq_optional() to get the interrupt
  • From: Sergey Shtylyov
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab
• Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Sergey Shtylyov
• Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Sergey Shtylyov
• Re: [PATCH v3 09/10] ata: pata_platform: Sort the #includes alphabetically
  • From: Sergey Shtylyov
• Re: [PATCH v3 08/10] ata: pata_platform: Drop validating num_resources count
  • From: Sergey Shtylyov
• Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Sergey Shtylyov
• Re: [PATCH v3 06/10] ata: pata_of_platform: Make use of platform_get_mem_or_io()
  • From: Sergey Shtylyov
• Re: [PATCH v3 05/10] ata: pata_platform: Drop checking IRQ number
  • From: Sergey Shtylyov
• Re: [PATCH v3 04/10] ata: pata_platform: Use platform_get_irq_optional() to get the interrupt
  • From: Sergey Shtylyov
• Re: [PATCH v3 03/10] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
  • From: Sergey Shtylyov
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Guenter Roeck
• [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle
• Re: [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
  • From: Paul Menzel
• [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
  • From: Paul Menzel
• [PATCH v2 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
  • From: Paul Menzel
• [PATCH 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
  • From: Paul Menzel
• [PATCH 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
  • From: Paul Menzel
• Re: [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
  • From: Lad, Prabhakar
• Re: [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
  • From: Damien Le Moal
• Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Andy Shevchenko
• Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Lad, Prabhakar
• Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Andy Shevchenko
• Re: [PATCH v3 03/10] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
  • From: Lad, Prabhakar
• Re: [PATCH v3 03/10] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko
• Re: [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
  • From: Lad, Prabhakar
• Re: [PATCH v3 01/10] ata: pata_platform: Make use of platform_get_mem_or_io()
  • From: Lad, Prabhakar
• Re: [PATCH v3 01/10] ata: pata_platform: Make use of platform_get_mem_or_io()
  • From: Sergey Shtylyov
• Re: [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
  • From: Sergey Shtylyov
• [PATCH v3 10/10] ata: pata_platform: Make use of GENMASK() macro
  • From: Lad Prabhakar
• [PATCH v3 09/10] ata: pata_platform: Sort the #includes alphabetically
  • From: Lad Prabhakar
• [PATCH v3 08/10] ata: pata_platform: Drop validating num_resources count
  • From: Lad Prabhakar
• [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Lad Prabhakar
• [PATCH v3 05/10] ata: pata_platform: Drop checking IRQ number
  • From: Lad Prabhakar
• [PATCH v3 06/10] ata: pata_of_platform: Make use of platform_get_mem_or_io()
  • From: Lad Prabhakar
• [PATCH v3 04/10] ata: pata_platform: Use platform_get_irq_optional() to get the interrupt
  • From: Lad Prabhakar
• [PATCH v3 03/10] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
  • From: Lad Prabhakar
• [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
  • From: Lad Prabhakar
• [PATCH v3 01/10] ata: pata_platform: Make use of platform_get_mem_or_io()
  • From: Lad Prabhakar
• Re: [PATCH v2 2/4] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Sergey Shtylyov
• Re: [PATCH v2 2/4] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Sergey Shtylyov
• Re: [PATCH 43/68] libata: drop ata_msg_info()
  • From: Sergey Shtylyov
• Re: [PATCH v2 1/4] ata: pata_platform: make use of platform_get_mem_or_io()
  • From: Lad, Prabhakar
• Re: [PATCH 43/68] libata: drop ata_msg_info()
  • From: Sergey Shtylyov
• Re: [PATCH] ata: libahci_platform: Remove abundant check
  • From: Sergey Shtylyov
• Re: [PATCH] ata: libahci_platform: Remove abundant check
  • From: Damien Le Moal
• Re: [PATCH] ata: libahci_platform: Remove abundant check
  • From: Damien Le Moal
• Re: [PATCH v2 1/4] ata: pata_platform: make use of platform_get_mem_or_io()
  • From: Damien Le Moal
• [PATCH] ata: libahci_platform: Remove abundant check
  • From: Jiasheng Jiang
• Re: [PATCH v2 1/4] ata: pata_platform: make use of platform_get_mem_or_io()
  • From: Sergey Shtylyov
• Re: [PATCH v2 4/4] ata: pata_platform: Make use of GENMASK() macro
  • From: Sergey Shtylyov
• Re: [PATCH v2 3/4] ata: pata_platform: Sort the #includes alphabetically
  • From: Sergey Shtylyov
• [PATCH v2 4/4] ata: pata_platform: Make use of GENMASK() macro
  • From: Lad Prabhakar
• [PATCH v2 3/4] ata: pata_platform: Sort the #includes alphabetically
  • From: Lad Prabhakar
• [PATCH v2 2/4] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Lad Prabhakar
• [PATCH v2 1/4] ata: pata_platform: make use of platform_get_mem_or_io()
  • From: Lad Prabhakar
• [PATCH v2 0/4] ata: pata_platform: Refurbish the driver
  • From: Lad Prabhakar
• [PATCH 67/68] sata_dwc_460ex: remove 'check_status' argument
  • From: Hannes Reinecke
• [PATCH 63/68] sata_gemini: convert pr_err() calls
  • From: Hannes Reinecke
• [PATCH 61/68] pata_octeon_cf: Replace pr_XXX() calls with structured logging
  • From: Hannes Reinecke
• [PATCH 60/68] pata_hpt37x: convert pr_XXX() calls
  • From: Hannes Reinecke
• [PATCH 65/68] libata-scsi: rework ata_dump_status to avoid using pr_cont()
  • From: Hannes Reinecke
• [PATCH 58/68] sata_sx4: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 54/68] pata_marvell: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 64/68] pata_hpt366: convert pr_warn() calls
  • From: Hannes Reinecke
• [PATCH 66/68] sata_dwc_460ex: drop DEBUG_NCQ
  • From: Hannes Reinecke
• [PATCH 52/68] pata_cypress: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 68/68] sata_dwc_460ex: Remove debug compile options
  • From: Hannes Reinecke
• [PATCH 62/68] pata_hpt3x2n: convert pr_XXX() calls
  • From: Hannes Reinecke
• [PATCH 59/68] sata_mv: convert remaining printk() to structured logging
  • From: Hannes Reinecke
• [PATCH 56/68] pata_serverworks: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 55/68] pata_rz1000: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 49/68] pata_cmd64x: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 48/68] pata_cmd640: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 47/68] pata_atp867x: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 50/68] pata_cs5520: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 41/68] libata: drop ata_msg_warn()
  • From: Hannes Reinecke
• [PATCH 57/68] pata_sil680: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 45/68] libata: remove 'new' ata message handling
  • From: Hannes Reinecke
• [PATCH 42/68] libata: drop ata_msg_probe()
  • From: Hannes Reinecke
• [PATCH 53/68] pata_it821x: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 51/68] pata_cs5536: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 38/68] libata: drop ata_msg_error() and ata_msg_intr()
  • From: Hannes Reinecke
• [PATCH 35/68] sata_sil: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 32/68] sata_mv: Drop pointless VPRINTK() call and convert the remaining one
  • From: Hannes Reinecke
• [PATCH 46/68] libata: remove debug compilation switches
  • From: Hannes Reinecke
• [PATCH 43/68] libata: drop ata_msg_info()
  • From: Hannes Reinecke
• [PATCH 37/68] sata_sx4: add module parameter 'dimm_test'
  • From: Hannes Reinecke
• [PATCH 29/68] sata_qstor: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 31/68] sata_inic162x: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 44/68] libata: drop ata_msg_drv()
  • From: Hannes Reinecke
• [PATCH 36/68] sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 40/68] libata: drop ata_msg_malloc()
  • From: Hannes Reinecke
• [PATCH 39/68] libata: drop ata_msg_ctl()
  • From: Hannes Reinecke
• [PATCH 33/68] sata_nv: drop pointless VPRINTK() calls and convert remaining ones
  • From: Hannes Reinecke
• [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 25/68] pdc_adma: Drop pointless VPRINTK() calls and remove disabled NCQ debugging
  • From: Hannes Reinecke
• [PATCH 27/68] pata_via: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 34/68] sata_fsl: convert VPRINTK() calls to ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 30/68] sata_rcar: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 23/68] libata: remove pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 26/68] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining one
  • From: Hannes Reinecke
• [PATCH 24/68] ahci: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 22/68] pata_pdc2027x: Replace PDPRINTK() with standard ata logging
  • From: Hannes Reinecke
• [PATCH 12/68] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros
  • From: Hannes Reinecke
• [PATCH 16/68] sata_mv: replace DPRINTK with dynamic debugging
  • From: Hannes Reinecke
• [PATCH 15/68] sata_mv: kill 'port' argument in mv_dump_all_regs()
  • From: Hannes Reinecke
• [PATCH 21/68] sata_qstor: replace DPRINTK() with ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 20/68] sata_rcar: replace DPRINTK() with ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 09/68] libata-sff: tracepoints for HSM state machine
  • From: Hannes Reinecke
• [PATCH 14/68] libata: move DPRINTK to ata debugging
  • From: Hannes Reinecke
• [PATCH 10/68] libata-scsi: drop DPRINTK calls for cdb translation
  • From: Hannes Reinecke
• [PATCH 13/68] libata: revamp ata_get_cmd_descript()
  • From: Hannes Reinecke
• [PATCH 17/68] pata_octeon_cf: remove DPRINTK() macro in interrupt context
  • From: Hannes Reinecke
• [PATCH 19/68] sata_fsl: move DPRINTK to ata debugging
  • From: Hannes Reinecke
• [PATCH 18/68] pdc_adma: Remove DPRINTK call
  • From: Hannes Reinecke
• [PATCH 08/68] libata: tracepoints for bus-master DMA
  • From: Hannes Reinecke
• [PATCH 06/68] libata: add reset tracepoints
  • From: Hannes Reinecke
• [PATCH 01/68] libata: remove pointless debugging messages
  • From: Hannes Reinecke
• [PATCH 11/68] libata: add tracepoints for ATA error handling
  • From: Hannes Reinecke
• [PATCH 05/68] libata: sanitize ATA_HORKAGE_DUMP_ID
  • From: Hannes Reinecke
• [PATCH 07/68] libata: add qc_prep tracepoint
  • From: Hannes Reinecke
• [PATCH 03/68] libata: Add ata_port_classify() helper
  • From: Hannes Reinecke
• [PATCH 04/68] libata: move ata_dump_id() to dynamic debugging
  • From: Hannes Reinecke
• [PATCH 02/68] libata: whitespace cleanup
  • From: Hannes Reinecke
• [PATCHv3 00/68] libata: rework logging, take II
  • From: Hannes Reinecke
• Re: [PATCH] libata: use min() to make code cleaner
  • From: Damien Le Moal
• Re: [PATCH v2 1/1] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Damien Le Moal
• [PATCH] libata: use min() to make code cleaner
  • From: cgel . zte
• Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Sergey Shtylyov
• Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Lad, Prabhakar
• Re: [GIT PULL] libata fixes for 5.16-rc6
  • From: pr-tracker-bot
• [GIT PULL] libata fixes for 5.16-rc6
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Sergey Shtylyov
• Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Lad, Prabhakar
• Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Rob Herring
• Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Lad, Prabhakar
• Re: [PATCH v4 3/6] ARM: dts: NSP: Rename SATA unit name
  • From: Florian Fainelli
• Re: [PATCH v4 6/6] dt-bindings: usb: Convert BDC to YAML
  • From: Rob Herring
• Re: [PATCH v4 5/6] dt-bindings: bus: Convert GISB arbiter to YAML
  • From: Rob Herring
• Re: [PATCH v4 4/6] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Rob Herring
• Re: [PATCH v4 1/6] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
  • From: Rob Herring
• Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Rob Herring
• [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
  • From: Lad Prabhakar
• [PATCH 1/2] ata: pata_platform: make use of platform_get_mem_or_io()
  • From: Lad Prabhakar
• [PATCH 0/2] ata: pata_platform: Refurbish the driver
  • From: Lad Prabhakar
• Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
  • From: Lad, Prabhakar
• Re: [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
  • From: Andy Shevchenko
• [PATCH v2 1/1] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
  • From: Sergey Shtylyov
• [PATCH v4 6/6] dt-bindings: usb: Convert BDC to YAML
  • From: Florian Fainelli
• [PATCH v4 5/6] dt-bindings: bus: Convert GISB arbiter to YAML
  • From: Florian Fainelli
• [PATCH v4 4/6] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Florian Fainelli
• [PATCH v4 3/6] ARM: dts: NSP: Rename SATA unit name
  • From: Florian Fainelli
• [PATCH v4 2/6] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
  • From: Florian Fainelli
• [PATCH v4 1/6] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
  • From: Florian Fainelli
• [PATCH v4 0/6] Broadcom DT bindings updates to YAML
  • From: Florian Fainelli
• Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
  • From: Lad, Prabhakar
• Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
  • From: Damien Le Moal
• Re: [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
  • From: Damien Le Moal
• Re: [PATCH v2 RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: Damien Le Moal
• Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
  • From: Lad, Prabhakar
• Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
  • From: Rob Herring
• Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
  • From: Damien Le Moal
• [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
  • From: Lad Prabhakar
• Re: [PATCH v2 RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: Damien Le Moal
• Re: [PATCH v3 15/15] dt-bindings: usb: Convert BDC to YAML
  • From: Rob Herring
• Re: [PATCH v3 14/15] dt-bindings: bus: Convert GISB arbiter to YAML
  • From: Rob Herring
• Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Rob Herring
• Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Rob Herring
• Re: [PATCH v3 11/15] dt-bindings: thermal: Convert Broadcom TMON to YAML
  • From: Rob Herring
• Re: [PATCH v3 10/15] dt-bindings: rng: Convert iProc RNG200 to YAML
  • From: Rob Herring
• Re: [PATCH v3 09/15] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
  • From: Rob Herring
• Re: [PATCH v3 07/15] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
  • From: Rob Herring
• Re: [PATCH v3 06/15] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
  • From: Rob Herring
• Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Rob Herring
• Re: [PATCH v3 04/15] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
  • From: Rob Herring
• Re: [PATCH v3 03/15] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
  • From: Rob Herring
• Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
  • From: Rob Herring
• [PATCH v2 RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: George Kennedy
• Re: [PATCH v2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: Greg KH
• [PATCH v2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: George Kennedy
• Re: [PATCH RESEND 3] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: Damien Le Moal
• [PATCH RESEND 3] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: George Kennedy
• Re: [PATCH RESEND 2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: Damien Le Moal
• [PATCH 05/17] sata_fsl: Use struct_group() for memcpy() region
  • From: Kees Cook
• Re: [PATCH RESEND 2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: George Kennedy
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH RESEND 2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: Damien Le Moal
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Damien Le Moal
• [PATCH RESEND 2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: George Kennedy
• Re: [PATCH RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: Greg KH
• [PATCH RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: George Kennedy
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Damien Le Moal
• Re: [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Sergey Shtylyov
• Re: [PATCH 14/68] libata: move DPRINTK to ata debugging
  • From: Sergey Shtylyov
• Re: [PATCH 13/68] libata: revamp ata_get_cmd_descript()
  • From: Sergey Shtylyov
• Re: [PATCH 26/68] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining one
  • From: Sergey Shtylyov
• Re: [PATCH 46/68] libata: remove debug compilation switches
  • From: Sergey Shtylyov
• Re: [PATCH 67/68] sata_dwc_460ex: remove 'checkstatus' argument
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
  • From: Damien Le Moal
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Damien Le Moal
• Re: [GIT PULL] libata fixes for 5.16-rc5
  • From: pr-tracker-bot
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergei Shtylyov
• Re: [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergei Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Mikael Pettersson
• Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Bartosz Golaszewski
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
  • From: Hannes Reinecke
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
  • From: Andy Shevchenko
• [PATCH 66/68] sata_dwc_460ex: drop DEBUG_NCQ
  • From: Hannes Reinecke
• [PATCH 68/68] sata_dwc_460ex: Remove debug compile options
  • From: Hannes Reinecke
• [PATCH 67/68] sata_dwc_460ex: remove 'checkstatus' argument
  • From: Hannes Reinecke
• [PATCH 62/68] pata_hpt3x2n: convert pr_XXX() calls
  • From: Hannes Reinecke
• [PATCH 65/68] libata-scsi: rework ata_dump_status to avoid using pr_cont()
  • From: Hannes Reinecke
• [PATCH 63/68] sata_gemini: convert pr_err() calls
  • From: Hannes Reinecke
• [PATCH 64/68] pata_hpt366: convert pr_warn() calls
  • From: Hannes Reinecke
• [PATCH 60/68] pata_hpt37x: convert pr_XXX() calls
  • From: Hannes Reinecke
• [PATCH 55/68] pata_rz1000: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 58/68] sata_sx4: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 59/68] sata_mv: convert remaining printk() to structured logging
  • From: Hannes Reinecke
• [PATCH 61/68] pata_octeon_cf: Replace pr_XXX() calls with structured logging
  • From: Hannes Reinecke
• [PATCH 56/68] pata_serverworks: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 54/68] pata_marvell: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 57/68] pata_sil680: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 53/68] pata_it821x: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 50/68] pata_cs5520: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 39/68] libata: drop ata_msg_ctl()
  • From: Hannes Reinecke
• [PATCH 47/68] pata_atp867x: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 52/68] pata_cypress: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 46/68] libata: remove debug compilation switches
  • From: Hannes Reinecke
• [PATCH 43/68] libata: drop ata_msg_info()
  • From: Hannes Reinecke
• [PATCH 45/68] libata: remove 'new' ata message handling
  • From: Hannes Reinecke
• [PATCH 42/68] libata: drop ata_msg_probe()
  • From: Hannes Reinecke
• [PATCH 51/68] pata_cs5536: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 49/68] pata_cmd64x: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 44/68] libata: drop ata_msg_drv()
  • From: Hannes Reinecke
• [PATCH 48/68] pata_cmd640: convert printk() calls
  • From: Hannes Reinecke
• [PATCH 38/68] libata: drop ata_msg_error() and ata_msg_intr()
  • From: Hannes Reinecke
• [PATCH 37/68] sata_sx4: add module parameter 'dimm_test'
  • From: Hannes Reinecke
• [PATCH 34/68] sata_fsl: convert VPRINTK() calls to ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 36/68] sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 33/68] sata_nv: drop pointless VPRINTK() calls and convert remaining ones
  • From: Hannes Reinecke
• [PATCH 40/68] libata: drop ata_msg_malloc()
  • From: Hannes Reinecke
• [PATCH 29/68] sata_qstor: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 41/68] libata: drop ata_msg_warn()
  • From: Hannes Reinecke
• [PATCH 35/68] sata_sil: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 22/68] pata_pdc2027x: Replace PDPRINTK() with standard ata logging
  • From: Hannes Reinecke
• [PATCH 30/68] sata_rcar: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 26/68] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining one
  • From: Hannes Reinecke
• [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 27/68] pata_via: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 32/68] sata_mv: Drop pointless VPRINTK() call and convert the remaining one
  • From: Hannes Reinecke
• [PATCH 25/68] pdc_adma: Drop pointless VPRINTK() calls and remove disabled NCQ debugging
  • From: Hannes Reinecke
• [PATCH 24/68] ahci: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 31/68] sata_inic162x: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 23/68] libata: remove pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 16/68] sata_mv: replace DPRINTK with dynamic debugging
  • From: Hannes Reinecke
• [PATCH 06/68] libata: add reset tracepoints
  • From: Hannes Reinecke
• [PATCH 21/68] sata_qstor: replace DPRINTK() with ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 17/68] pata_octeon_cf: remove DPRINTK() macro in interrupt context
  • From: Hannes Reinecke
• [PATCH 19/68] sata_fsl: move DPRINTK to ata debugging
  • From: Hannes Reinecke
• [PATCH 13/68] libata: revamp ata_get_cmd_descript()
  • From: Hannes Reinecke
• [PATCH 18/68] pdc_adma: Remove DPRINTK call
  • From: Hannes Reinecke
• [PATCH 20/68] sata_rcar: replace DPRINTK() with ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 07/68] libata: add qc_prep tracepoint
  • From: Hannes Reinecke
• [PATCH 14/68] libata: move DPRINTK to ata debugging
  • From: Hannes Reinecke
• [PATCH 10/68] libata-scsi: drop DPRINTK calls for cdb translation
  • From: Hannes Reinecke
• [PATCH 15/68] sata_mv: kill 'port' argument in mv_dump_all_regs()
  • From: Hannes Reinecke
• [PATCH 08/68] libata: tracepoints for bus-master DMA
  • From: Hannes Reinecke
• [PATCH 05/68] libata: sanitize ATA_HORKAGE_DUMP_ID
  • From: Hannes Reinecke
• [PATCH 01/68] libata: remove pointless debugging messages
  • From: Hannes Reinecke
• [PATCH 09/68] libata-sff: tracepoints for HSM state machine
  • From: Hannes Reinecke
• [PATCH 12/68] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros
  • From: Hannes Reinecke
• [PATCH 04/68] libata: move ata_dump_id() to dynamic debugging
  • From: Hannes Reinecke
• [PATCH 03/68] libata: Add ata_port_classify() helper
  • From: Hannes Reinecke
• [PATCH 11/68] libata: add tracepoints for ATA error handling
  • From: Hannes Reinecke
• [PATCHv2 00/68] libata: rework logging, take II
  • From: Hannes Reinecke
• [PATCH 02/68] libata: whitespace cleanup
  • From: Hannes Reinecke
• [GIT PULL] libata fixes for 5.16-rc5
  • From: Damien Le Moal
• Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Linus Walleij
• Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
  • From: Florian Fainelli
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Damien Le Moal
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Damien Le Moal
• Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
  • From: Damien Le Moal
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Sergey Shtylyov
• Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Hans de Goede
• Re: [PATCH] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: Greg KH
• [PATCH] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
  • From: George Kennedy
• [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
  • From: Andy Shevchenko
• [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
  • From: Andy Shevchenko
• [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
  • From: Andy Shevchenko
• [PATCH v1 1/3] ata: sata_dwc_460ex: Use devm_platform_*ioremap_resource() APIs
  • From: Andy Shevchenko
• [PATCH v1 3/3] ata: sata_dwc_460ex: Remove unused forward declaration
  • From: Andy Shevchenko
• Re: [PATCH 22/73] libata: add qc_prep tracepoint
  • From: Sergei Shtylyov
• Re: [PATCH 22/73] libata: add qc_prep tracepoint
  • From: Hannes Reinecke
• Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
  • From: Philipp Zabel
• Re: [PATCH 22/73] libata: add qc_prep tracepoint
  • From: Sergei Shtylyov
• Re: [PATCH 33/73] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Sergey Shtylyov
• Re: [PATCH 59/73] pata_cypressx: convert blank printk() calls
  • From: Sergey Shtylyov
• Re: [PATCH 64/73] pata_sil680: convert blank printk() calls
  • From: Sergey Shtylyov
• Re: [PATCH 10/73] libata: drop debugging statements for bus-master DMA
  • From: Hannes Reinecke
• Re: [PATCH 06/73] sata_mv: kill 'port' argument in mv_dump_all_regs()
  • From: Hannes Reinecke
• Re: [PATCH 71/73] pata_hpt3x2n: convert pr_err() calls
  • From: Sergey Shtylyov
• Re: [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter
  • From: Damien Le Moal
• Re: [PATCH 69/73] pata_octeon_cf: Replace pr_XXX() calls with structured logging
  • From: Sergey Shtylyov
• Re: [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter
  • From: Hannes Reinecke
• Re: [PATCH 02/73] libata: Add ata_port_classify() helper
  • From: Hannes Reinecke
• Re: [PATCH 35/73] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Mikael Pettersson
• Re: [PATCH] libata: add horkage for ASMedia 1092
  • From: Damien Le Moal
• Re: [PATCH 00/73] libata: rework logging, take II
  • From: Damien Le Moal
• Re: [PATCH 72/73] pata_hpt366: convert pr_warn() calls
  • From: Damien Le Moal
• Re: [PATCH 71/73] pata_hpt3x2n: convert pr_err() calls
  • From: Damien Le Moal
• Re: [PATCH 70/73] pata_hpt3x2n: convert pr_XXX() calls
  • From: Damien Le Moal
• Re: [PATCH 68/73] pata_hpt37x: convert pr_XXX() calls
  • From: Damien Le Moal
• Re: [PATCH 62/73] pata_rz1000: convert blank printk() calls
  • From: Damien Le Moal
• Re: [PATCH 54/73] pata_atp867x: convert blank printk() calls
  • From: Damien Le Moal
• Re: [PATCH 32/73] pdc_adma: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Damien Le Moal
• Re: [PATCH 08/73] libata: drop DPRINTK() calls in reset
  • From: Damien Le Moal
• Re: [PATCH 24/73] pata_octeon_cf: remove DPRINTK() macro in interrupt context
  • From: Damien Le Moal
• Re: [PATCH 21/73] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros
  • From: Damien Le Moal
• Re: [PATCH 20/73] libata-eh: remove DPRINTK() calls for request sense
  • From: Damien Le Moal
• Re: [PATCH 19/73] libata: drop DPRINTK() calls during ATA error handling
  • From: Damien Le Moal
• Re: [PATCH 10/73] libata: drop debugging statements for bus-master DMA
  • From: Damien Le Moal
• Re: [PATCH 06/73] sata_mv: kill 'port' argument in mv_dump_all_regs()
  • From: Damien Le Moal
• Re: [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter
  • From: Damien Le Moal
• Re: [PATCH 02/73] libata: Add ata_port_classify() helper
  • From: Damien Le Moal
• Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Florian Fainelli
• [PATCH 51/73] libata: drop ata_msg_drv()
  • From: Hannes Reinecke
• [PATCH 45/73] libata: drop ata_msg_error() and ata_msg_intr()
  • From: Hannes Reinecke
• [PATCH 48/73] libata: drop ata_msg_warn()
  • From: Hannes Reinecke
• [PATCH 47/73] libata: drop ata_msg_malloc()
  • From: Hannes Reinecke
• [PATCH 52/73] libata: remove 'new' ata message handling
  • From: Hannes Reinecke
• [PATCH 53/73] libata: remove debug compilation switches
  • From: Hannes Reinecke
• [PATCH 63/73] pata_serverworks: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 65/73] pdc_adma: remove disabled debugging messages
  • From: Hannes Reinecke
• [PATCH 67/73] sata_mv: convert remaining printk() to structured logging
  • From: Hannes Reinecke
• [PATCH 66/73] sata_sx4: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 69/73] pata_octeon_cf: Replace pr_XXX() calls with structured logging
  • From: Hannes Reinecke
• [PATCH 70/73] pata_hpt3x2n: convert pr_XXX() calls
  • From: Hannes Reinecke
• [PATCH 71/73] pata_hpt3x2n: convert pr_err() calls
  • From: Hannes Reinecke
• [PATCH 72/73] pata_hpt366: convert pr_warn() calls
  • From: Hannes Reinecke
• [PATCH 68/73] pata_hpt37x: convert pr_XXX() calls
  • From: Hannes Reinecke
• [PATCH 57/73] pata_cs5520: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 41/73] sata_fsl: convert VPRINTK() calls to ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 54/73] pata_atp867x: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 60/73] pata_it821x: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 58/73] pata_cs5536: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 62/73] pata_rz1000: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 59/73] pata_cypressx: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 61/73] pata_marvell: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 64/73] pata_sil680: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 43/73] sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 44/73] sata_sx4: add module parameter 'dimm_test'
  • From: Hannes Reinecke
• [PATCH 46/73] libata: drop ata_msg_ctl()
  • From: Hannes Reinecke
• [PATCH 39/73] sata_mv: Drop pointless VPRINTK() call and convert the remaining one
  • From: Hannes Reinecke
• [PATCH 42/73] sata_sil: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 40/73] sata_nv: drop pointless VPRINTK() calls and convert remaining ones
  • From: Hannes Reinecke
• [PATCH 56/73] pata_cmd64x: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 36/73] sata_qstor: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 35/73] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 73/73] libata-scsi: rework ata_dump_status to avoid using pr_cont()
  • From: Hannes Reinecke
• [PATCH 50/73] libata: drop ata_msg_info()
  • From: Hannes Reinecke
• [PATCH 38/73] sata_inic162x: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 55/73] pata_cmd640: convert blank printk() calls
  • From: Hannes Reinecke
• [PATCH 37/73] sata_rcar: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 34/73] pata_via: Drop pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 30/73] libata: remove pointless VPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 49/73] libata: drop ata_msg_probe()
  • From: Hannes Reinecke
• [PATCH 31/73] ahci: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 33/73] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 29/73] pata_pdc2027x: Replace PDPRINTK() with standard ata logging
  • From: Hannes Reinecke
• [PATCH 25/73] pdc_adma: Remove DPRINTK call
  • From: Hannes Reinecke
• [PATCH 27/73] sata_rcar: replace DPRINTK() with ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 22/73] libata: add qc_prep tracepoint
  • From: Hannes Reinecke
• [PATCH 32/73] pdc_adma: Drop pointless VPRINTK() calls and convert the remaining ones
  • From: Hannes Reinecke
• [PATCH 23/73] libata: move DPRINTK to ata debugging
  • From: Hannes Reinecke
• [PATCH 19/73] libata: drop DPRINTK() calls during ATA error handling
  • From: Hannes Reinecke
• [PATCH 28/73] sata_qstor: replace DPRINTK() with ata_port_dbg()
  • From: Hannes Reinecke
• [PATCH 20/73] libata-eh: remove DPRINTK() calls for request sense
  • From: Hannes Reinecke
• [PATCH 26/73] sata_fsl: move DPRINTK to ata debugging
  • From: Hannes Reinecke
• [PATCH 24/73] pata_octeon_cf: remove DPRINTK() macro in interrupt context
  • From: Hannes Reinecke
• [PATCH 16/73] libata-sff: add tracepoints for ata_sff_flush_pio_task()
  • From: Hannes Reinecke
• [PATCH 18/73] libata: add tracepoints for ATA error handling
  • From: Hannes Reinecke
• [PATCH 14/73] sata_nv: use generic tracepoints
  • From: Hannes Reinecke
• [PATCH 21/73] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros
  • From: Hannes Reinecke
• [PATCH 13/73] sata_dwc_460ex: use generic tracepoints
  • From: Hannes Reinecke
• [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter
  • From: Hannes Reinecke
• [PATCH 07/73] libata: add reset tracepoints
  • From: Hannes Reinecke
• [PATCH 10/73] libata: drop debugging statements for bus-master DMA
  • From: Hannes Reinecke
• [PATCH 15/73] libata-sff: tracepoints for HSM state machine
  • From: Hannes Reinecke
• [PATCH 17/73] libata-scsi: drop DPRINTK calls for cdb translation
  • From: Hannes Reinecke
• [PATCH 11/73] pata_octeon_cf: add bmdma tracepoints and drop DPRINTK() calls
  • From: Hannes Reinecke
• [PATCH 12/73] pata_arasan_cf: use generic tracepoints
  • From: Hannes Reinecke
• [PATCH 03/73] libata: move ata_dump_id() to dynamic debugging
  • From: Hannes Reinecke
• [PATCH 08/73] libata: drop DPRINTK() calls in reset
  • From: Hannes Reinecke
• [PATCH 09/73] libata: tracepoints for bus-master DMA
  • From: Hannes Reinecke
• [PATCH 02/73] libata: Add ata_port_classify() helper
  • From: Hannes Reinecke
• [PATCH 01/73] libata: remove pointless debugging messages
  • From: Hannes Reinecke
• [PATCH 00/73] libata: rework logging, take II
  • From: Hannes Reinecke
• [PATCH 06/73] sata_mv: kill 'port' argument in mv_dump_all_regs()
  • From: Hannes Reinecke
• [PATCH 04/73] libata: sanitize ATA_HORKAGE_DUMP_ID
  • From: Hannes Reinecke
• Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Rob Herring
• Re: [PATCH v2 02/14] dt-bindings: reset: Convert Broadcom STB reset to YAML
  • From: Philipp Zabel
• Re: [PATCH] libata: add horkage for ASMedia 1092
  • From: Hannes Reinecke
• Re: [PATCH] libata: add horkage for ASMedia 1092
  • From: Damien Le Moal
• [PATCH] libata: add horkage for ASMedia 1092
  • From: Hannes Reinecke
• Re: [PATCH v3 12/15] ARM: dts: NSP: Rename SATA unit name
  • From: Damien Le Moal
• [PATCH v3 15/15] dt-bindings: usb: Convert BDC to YAML
  • From: Florian Fainelli
• [PATCH v3 14/15] dt-bindings: bus: Convert GISB arbiter to YAML
  • From: Florian Fainelli
• [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Florian Fainelli
• [PATCH v3 12/15] ARM: dts: NSP: Rename SATA unit name
  • From: Florian Fainelli
• [PATCH v3 11/15] dt-bindings: thermal: Convert Broadcom TMON to YAML
  • From: Florian Fainelli
• [PATCH v3 10/15] dt-bindings: rng: Convert iProc RNG200 to YAML
  • From: Florian Fainelli
• [PATCH v3 09/15] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
  • From: Florian Fainelli
• [PATCH v3 08/15] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
  • From: Florian Fainelli
• [PATCH v3 07/15] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
  • From: Florian Fainelli
• [PATCH v3 06/15] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
  • From: Florian Fainelli
• [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Florian Fainelli
• [PATCH v3 04/15] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
  • From: Florian Fainelli
• [PATCH v3 03/15] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
  • From: Florian Fainelli
• [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
  • From: Florian Fainelli
• [PATCH v3 01/15] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
  • From: Florian Fainelli
• [PATCH v3 00/15] Broadcom DT bindings updates to YAML
  • From: Florian Fainelli
• Re: [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Florian Fainelli
• Re: [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
  • From: Florian Fainelli
• Re: [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
  • From: Florian Fainelli
• Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Florian Fainelli
• Re: [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Rob Herring
• Re: [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
  • From: Rob Herring
• Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Rob Herring
• Re: [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
  • From: Uwe Kleine-König
• Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Gregory Fong
• [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Florian Fainelli
• [PATCH v2 11/14] dt-bindings: thermal: Convert Broadcom TMON to YAML
  • From: Florian Fainelli
• [PATCH v2 07/14] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
  • From: Florian Fainelli
• [PATCH v2 10/14] dt-bindings: rng: Convert iProc RNG200 to YAML
  • From: Florian Fainelli
• [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
  • From: Florian Fainelli
• [PATCH v2 08/14] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
  • From: Florian Fainelli
• [PATCH v2 06/14] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
  • From: Florian Fainelli
• [PATCH v2 04/14] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
  • From: Florian Fainelli
• [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
  • From: Florian Fainelli
• [PATCH v2 14/14] dt-bindings: usb: Convert BDC to YAML
  • From: Florian Fainelli
• [PATCH v2 13/14] dt-bindings: bus: Convert GISB arbiter to YAML
  • From: Florian Fainelli
• [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Florian Fainelli
• [PATCH v2 02/14] dt-bindings: reset: Convert Broadcom STB reset to YAML
  • From: Florian Fainelli
• [PATCH v2 01/14] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
  • From: Florian Fainelli
• [PATCH v2 00/14] Broadcom DT bindings updates to YAML
  • From: Florian Fainelli
• Re: Need help to debug ata errors
  • From: Damien Le Moal
• Re: Need help to debug ata errors
  • From: Ayan Kumar Halder
• Re: Need help to debug ata errors
  • From: Damien Le Moal
• Re: [GIT PULL] libata fixes for 5.16-rc4
  • From: pr-tracker-bot
• Need help to debug ata errors
  • From: Ayan Kumar Halder
• [GIT PULL] libata fixes for 5.16-rc4
  • From: Damien Le Moal
• Re: [PATCH 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Florian Fainelli
• Re: [PATCH 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Gregory Fong
• [PATCH 1/4] ata: libata-sata: use sysfs_emit()
  • From: Damien Le Moal
• [PATCH 4/4] ata: sata_fsl: use sysfs_emit()
  • From: Damien Le Moal
• [PATCH 3/4] ata: ahci: use sysfs_emit()
  • From: Damien Le Moal
• [PATCH 2/4] ata: libata-scsi: use sysfs_emit()
  • From: Damien Le Moal
• [PATCH] ata: ahci_ceva: Fix sparse warning in ceva_ahci_read_id()
  • From: Damien Le Moal
• [PATCH 0/4] Cleanup ATA sysfs attribute show functions
  • From: Damien Le Moal
• [PATCH] ata: ahci_ceva: Fix sparse warning in ceva_ahci_read_id()
  • From: Damien Le Moal
• Re: [PATCH] ata: replace snprintf in show functions with sysfs_emit
  • From: Damien Le Moal
• Re: [PATCH 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Damien Le Moal
• [PATCH 08/14] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
  • From: Florian Fainelli
• [PATCH 14/14] dt-bindings: usb: Convert BDC to YAML
  • From: Florian Fainelli
• [PATCH 13/14] dt-bindings: bus: Convert GISB arbiter to YAML
  • From: Florian Fainelli
• [PATCH 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
  • From: Florian Fainelli
• [PATCH 11/14] dt-bindings: thermal: Convert Broadcom TMON to YAML
  • From: Florian Fainelli
• [PATCH 10/14] dt-bindings: rng: Convert iProc RNG200 to YAML
  • From: Florian Fainelli
• [PATCH 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
  • From: Florian Fainelli
• [PATCH 07/14] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
  • From: Florian Fainelli
• [PATCH 06/14] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
  • From: Florian Fainelli
• [PATCH 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
  • From: Florian Fainelli
• [PATCH 04/14] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
  • From: Florian Fainelli
• [PATCH 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
  • From: Florian Fainelli
• [PATCH 02/14] dt-bindings: reset: Convert Broadcom STB reset to YAML
  • From: Florian Fainelli
• [PATCH 01/14] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
  • From: Florian Fainelli
• [PATCH 00/14] Broadcom DT bindings updates to YAML
  • From: Florian Fainelli
• [PATCH] ata: replace snprintf in show functions with sysfs_emit
  • From: davidcomponentone
• RE: [PATCH AUTOSEL 5.15 27/39] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
  • From: Limonciello, Mario
• RE: [PATCH AUTOSEL 5.15 28/39] ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
  • From: Limonciello, Mario
• Re: [PATCH -next V5 0/2] fix two bugs when trying rmmod sata_fsl
  • From: Damien Le Moal
• Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
  • From: Damien Le Moal
• Re: [PATCH v2] pata_falcon: Avoid type warnings from sparse
  • From: Damien Le Moal
• Re: [PATCH] ata: pata_ali: no need to initialise statics to 0
  • From: Damien Le Moal
• Re: [PATCH v2] pata_falcon: Avoid type warnings from sparse
  • From: Geert Uytterhoeven
• Re: [PATCH v2] pata_falcon: Avoid type warnings from sparse
  • From: Damien Le Moal
• Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
  • From: Damien Le Moal
• Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
  • From: Nikolay Kyx
• Re: [PATCH -next V5 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: libaokun (A)
• Re: [PATCH -next V5 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: libaokun (A)
• Re: [PATCH -next V5 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Sergei Shtylyov
• Re: [PATCH -next V5 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Sergei Shtylyov
• Re: [PATCH -next V5 0/2] fix two bugs when trying rmmod sata_fsl
  • From: Sergei Shtylyov
• [PATCH AUTOSEL 4.19 11/15] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 14/19] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 21/28] ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 20/28] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 28/39] ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 27/39] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
  • From: Sasha Levin
• Re: [PATCH -next V5 0/2] fix two bugs when trying rmmod sata_fsl
  • From: Damien Le Moal
• [PATCH -next V5 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next V5 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next V5 0/2] fix two bugs when trying rmmod sata_fsl
  • From: Baokun Li
• Re: [PATCH -next V4 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: libaokun (A)
• Re: [PATCH -next V4 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Damien Le Moal
• Re: [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Finn Thain
• [PATCH v2] pata_falcon: Avoid type warnings from sparse
  • From: Finn Thain
• Re: [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Geert Uytterhoeven
• Re: [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Geert Uytterhoeven
• Re: [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Finn Thain
• Re: [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Finn Thain
• Re: [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Michael Schmitz
• Re: [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Geert Uytterhoeven
• Re: [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Michael Schmitz
• [PATCH] pata_falcon: Add missing __iomem annotations
  • From: Finn Thain
• [PATCH -next V4 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next V4 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next V4 0/2] fix two bugs when trying rmmod sata_fsl
  • From: Baokun Li
• Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: libaokun (A)
• Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Sergei Shtylyov
• [PATCH -next V3 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next V3 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next V3 0/2] fix two bugs when trying rmmod sata_fsl
  • From: Baokun Li
• Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: libaokun (A)
• Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Damien Le Moal
• Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Damien Le Moal
• Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Sergei Shtylyov
• Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Sergei Shtylyov
• Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Damien Le Moal
• [PATCH -next V2 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next V2 0/2] fix two bugs when trying rmmod sata_fsl
  • From: Baokun Li
• Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: libaokun (A)
• Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: libaokun (A)
• Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: libaokun (A)
• Re: [GIT PULL] libata fixes for 5.16-rc2
  • From: pr-tracker-bot
• Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Damien Le Moal
• [GIT PULL] libata fixes for 5.16-rc2
  • From: Damien Le Moal
• Re: [GIT PULL] libata fixes for 5.16-rc2
  • From: Damien Le Moal
• Re: [GIT PULL] libata fixes for 5.16-rc2
  • From: Damien Le Moal
• Re: [GIT PULL] libata fixes for 5.16-rc2
  • From: Sergei Shtylyov
• Re: [GIT PULL] libata fixes for 5.16-rc2
  • From: Linus Torvalds
• Re: [GIT PULL] libata fixes for 5.16-rc2
  • From: Sergei Shtylyov
• Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Sergei Shtylyov
• [GIT PULL] libata fixes for 5.16-rc2
  • From: Damien Le Moal
• [PATCH -next 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  • From: Baokun Li
• [PATCH -next 0/2] fix two bugs when trying rmmod sata_fsl
  • From: Baokun Li
• Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
  • From: Kees Cook
• Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
  • From: Damien Le Moal
• Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
  • From: Kees Cook
• Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
  • From: Damien Le Moal
• [PATCH] sata_fsl: Use struct_group() for memcpy() region
  • From: Kees Cook
• RE: [PATCH 2/2] ata: Adjust behavior when StorageD3Enable _DSD is set
  • From: Limonciello, Mario
• Re: [PATCH 2/2] ata: Adjust behavior when StorageD3Enable _DSD is set
  • From: Damien Le Moal
• Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
  • From: Damien Le Moal
• Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
  • From: Nikolas L.
• Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
  • From: Damien Le Moal
• Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
  • From: Nikolas L.
• [PATCH 2/2] libata: core: add missing ata_identify_page_supported() calls
  • From: Damien Le Moal
• [PATCH 1/2] libata: core: improve ata_read_log_page() error message
  • From: Damien Le Moal
• [PATCH 0/2] Fix log page accesses
  • From: Damien Le Moal
• Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
  • From: Damien Le Moal
• PROBLEM: [drivers/ata] Read log page failed (boot error message)
  • From: Nikolay
• [PATCH] ata: pata_ali: no need to initialise statics to 0
  • From: Jason Wang
• Re: [GIT PULL] second round of libata changes for 5.16-rc1
  • From: pr-tracker-bot
• [PATCH 2/2] ata: Adjust behavior when StorageD3Enable _DSD is set
  • From: Mario Limonciello
• [PATCH 1/2] ahci: Add Green Sardine vendor ID as board_ahci_mobile
  • From: Mario Limonciello
• [GIT PULL] second round of libata changes for 5.16-rc1
  • From: Damien Le Moal
• Re: [PATCH] scsi: fix scsi device attributes registration
  • From: Damien Le Moal
• Re: [PATCH V2] libata: add horkage for missing Identify Device log
  • From: Martin K. Petersen
• Re: [PATCH] scsi: fix scsi device attributes registration
  • From: Steffen Maier
• Re: [PATCH] scsi: fix scsi device attributes registration
  • From: Christoph Hellwig
• Re: Problem with scsi device sysfs attributes
  • From: Damien Le Moal
• [PATCH] scsi: fix scsi device attributes registration
  • From: Damien Le Moal
• Re: [PATCH V2] libata: add horkage for missing Identify Device log
  • From: Damien Le Moal
• Re: [PATCH] libata: libahci: declare ahci_shost_attr_group as static
  • From: Christoph Hellwig
• Re: [PATCH V2] libata: add horkage for missing Identify Device log
  • From: Christoph Hellwig
• Re: Problem with scsi device sysfs attributes
  • From: Damien Le Moal
• [PATCH] libata: libahci: declare ahci_shost_attr_group as static
  • From: Damien Le Moal
• Problem with scsi device sysfs attributes
  • From: Damien Le Moal
• [PATCH V2] libata: add horkage for missing Identify Device log
  • From: Damien Le Moal
• Re: [PATCH] libata: add horkage for missing Identify Device log
  • From: Damien Le Moal
• Re: [PATCH] libata: add horkage for missing Identify Device log
  • From: Damien Le Moal
• Re: [PATCH] libata: add horkage for missing Identify Device log
  • From: Christoph Hellwig
• Re: [PATCH] ata: sata_highbank: Remove unnecessary print function dev_err()
  • From: Damien Le Moal
• [PATCH] libata: add horkage for missing Identify Device log
  • From: Damien Le Moal
• Re: [PATCH] libata: fix read log timeout value
  • From: Damien Le Moal
• Re: [PATCH] libata: fix read log timeout value
  • From: Geert Uytterhoeven
• [PATCH] libata: fix read log timeout value
  • From: Damien Le Moal
• [PATCH] ata: sata_highbank: Remove unnecessary print function dev_err()
  • From: Xu Wang
• Re: [PATCH v9 3/5] libata: support concurrent positioning ranges log
  • From: Damien Le Moal
• Re: [GIT PULL] libata changes for 5.16-rc1
  • From: pr-tracker-bot
• Re: [PATCH v9 3/5] libata: support concurrent positioning ranges log
  • From: Geert Uytterhoeven
• Re: [PATCH v9 3/5] libata: support concurrent positioning ranges log
  • From: Damien Le Moal
• Re: [PATCH v9 3/5] libata: support concurrent positioning ranges log
  • From: Geert Uytterhoeven
• [GIT PULL] libata changes for 5.16-rc1
  • From: Damien Le Moal
• [PATCH] dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support
  • From: Geert Uytterhoeven
• Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
  • From: Damien Le Moal
• Re: (subset) [PATCH v9 0/5] Initial support for multi-actuator HDDs
  • From: Jens Axboe
• Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
  • From: Jens Axboe