Linux IDE Archive

• Thread Index

• Re: [PATCH v7 00/11] libata cleanups and improvements
  • From: Damien Le Moal
• [PATCH v2 24/63] sata_fsl: Use struct_group() for memcpy() region
  • From: Kees Cook
• Re: [PATCH 1/2] dt-bindings: ata: drop unused Exynos SATA bindings
  • From: Rob Herring
• Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
  • From: Reimar Döffinger
• [PATCH] libata: fix setting and checking of DMA state.
  • From: Reimar Döffinger
• Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
  • From: Reimar Döffinger
• Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
  • From: Damien Le Moal
• Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
  • From: Reimar Döffinger
• [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
  • From: Reimar Döffinger
• Re: [PATCH v7 01/11] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• Re: [PATCH v7 01/11] libata: fix ata_host_alloc_pinfo()
  • From: James Bottomley
• Re: [PATCH v7 11/11] docs: sysfs-block-device: document ncq_prio_supported
  • From: Hannes Reinecke
• Re: [PATCH v7 10/11] docs: sysfs-block-device: improve ncq_prio_enable documentation
  • From: Hannes Reinecke
• Re: [PATCH v7 09/11] libata: Introduce ncq_prio_supported sysfs sttribute
  • From: Hannes Reinecke
• Re: [PATCH v7 01/11] libata: fix ata_host_alloc_pinfo()
  • From: Hannes Reinecke
• [PATCH v7 11/11] docs: sysfs-block-device: document ncq_prio_supported
  • From: Damien Le Moal
• [PATCH v7 10/11] docs: sysfs-block-device: improve ncq_prio_enable documentation
  • From: Damien Le Moal
• [PATCH v7 09/11] libata: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v7 08/11] libata: print feature list on device scan
  • From: Damien Le Moal
• [PATCH v7 07/11] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal
• [PATCH v7 06/11] libata: cleanup NCQ priority handling
  • From: Damien Le Moal
• [PATCH v7 05/11] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• [PATCH v7 04/11] libata: cleanup device sleep capability detection
  • From: Damien Le Moal
• [PATCH v7 03/11] libata: simplify ata_scsi_rbuf_fill()
  • From: Damien Le Moal
• [PATCH v7 02/11] libata: fix ata_host_start()
  • From: Damien Le Moal
• [PATCH v7 01/11] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• [PATCH v7 00/11] libata cleanups and improvements
  • From: Damien Le Moal
• Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
  • From: Damien Le Moal
• Re: [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG
  • From: Reimar Döffinger
• [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
  • From: Reimar Döffinger
• Re: [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG
  • From: Christoph Hellwig
• [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG
  • From: Reimar Döffinger
• Re: [PATCH v5 9/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Niklas Cassel
• [PATCH v6 9/9] libata: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v6 8/9] libata: print feature list on device scan
  • From: Damien Le Moal
• [PATCH v6 7/9] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal
• [PATCH v6 6/9] libata: cleanup NCQ priority handling
  • From: Damien Le Moal
• [PATCH v6 5/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• [PATCH v6 4/9] libata: cleanup device sleep capability detection
  • From: Damien Le Moal
• [PATCH v6 3/9] libata: simplify ata_scsi_rbuf_fill()
  • From: Damien Le Moal
• [PATCH v6 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal
• [PATCH v6 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• [PATCH v6 0/9] libata cleanups and improvements
  • From: Damien Le Moal
• Re: [PATCH v5 9/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• Re: [PATCH v5 9/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Niklas Cassel
• [PATCH 2/2] ARM: dts: exynos: drop undocumented samsung,sata-freq property in Exynos5250
  • From: Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: ata: drop unused Exynos SATA bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: hch@xxxxxxxxxxxxx
• Re: [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
  • From: Damien Le Moal
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• Re: [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
  • From: Christoph Hellwig
• Re: [PATCH v3 3/4] libata: support concurrent positioning ranges log
  • From: Christoph Hellwig
• Re: [PATCH v3 2/4] scsi: sd: add concurrent positioning ranges support
  • From: Christoph Hellwig
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Christoph Hellwig
• Re: [PATCH v5 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Hannes Reinecke
• [PATCH v5 9/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v5 8/9] libata: print feature list on device scan
  • From: Damien Le Moal
• [PATCH v5 7/9] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal
• [PATCH v5 6/9] libata: cleanup NCQ priority handling
  • From: Damien Le Moal
• [PATCH v5 5/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• [PATCH v5 4/9] libata: cleanup device sleep capability detection
  • From: Damien Le Moal
• [PATCH v5 3/9] libata: simplify ata_scsi_rbuf_fill()
  • From: Damien Le Moal
• [PATCH v5 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal
• [PATCH v5 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• [PATCH v5 0/9] libata cleanups and improvements
  • From: Damien Le Moal
• Re: [PATCH v4 10/10] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Martin K. Petersen
• Re: [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• Re: [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Hannes Reinecke
• Re: [PATCH v4 03/10] libata: fix sparse warning
  • From: Hannes Reinecke
• Re: [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
  • From: Hannes Reinecke
• [PATCH v4 10/10] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v4 08/10] libata: print feature list on device scan
  • From: Damien Le Moal
• [PATCH v4 07/10] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal
• [PATCH v4 06/10] libata: cleanup NCQ priority handling
  • From: Damien Le Moal
• [PATCH v4 05/10] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• [PATCH v4 04/10] libata: cleanup device sleep capability detection
  • From: Damien Le Moal
• [PATCH v4 03/10] libata: fix sparse warning
  • From: Damien Le Moal
• [PATCH v4 02/10] libata: fix ata_host_start()
  • From: Damien Le Moal
• [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• [PATCH v4 00/10] libata cleanups and improvements
  • From: Damien Le Moal
• Re: [PATCH v2 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal
• Re: [PATCH v2 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal
• Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• Re: [PATCH v2 2/9] libata: fix ata_host_start()
  • From: James Bottomley
• Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
  • From: James Bottomley
• Re: [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• Re: [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Hannes Reinecke
• Re: [PATCH v3 4/9] libata: cleanup ata_dev_configure()
  • From: Hannes Reinecke
• [PATCH v3 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v3 7/9] libata: print feature list on device scan
  • From: Damien Le Moal
• [PATCH v3 6/9] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal
• [PATCH v3 5/9] libata: cleanup NCQ priority handling
  • From: Damien Le Moal
• [PATCH v3 4/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• [PATCH v3 3/9] libata: cleanup device sleep capability detection
  • From: Damien Le Moal
• [PATCH v3 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal
• [PATCH v3 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• [PATCH v3 0/9] libata cleanups and improvements
  • From: Damien Le Moal
• Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Hannes Reinecke
• Re: [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• Re: [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Hannes Reinecke
• Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• Re: [PATCH v2 7/9] libata: print feature list on device scan
  • From: Hannes Reinecke
• Re: [PATCH v2 6/9] libata: fix ata_read_log_page() warning
  • From: Hannes Reinecke
• Re: [PATCH v2 5/9] libata: cleanup NCQ priority handling
  • From: Hannes Reinecke
• Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Hannes Reinecke
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal
• Re: [PATCH v2 3/9] libata: cleanup device sleep capability detection
  • From: Hannes Reinecke
• Re: [PATCH v2 2/9] libata: fix ata_host_start()
  • From: Hannes Reinecke
• Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Hannes Reinecke
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Hannes Reinecke
• [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v2 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH v2 7/9] libata: print feature list on device scan
  • From: Damien Le Moal
• [PATCH v2 6/9] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal
• [PATCH v2 5/9] libata: cleanup NCQ priority handling
  • From: Damien Le Moal
• [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• [PATCH v2 3/9] libata: cleanup device sleep capability detection
  • From: Damien Le Moal
• [PATCH v2 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal
• [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal
• [PATCH v2 0/9] libata cleanups and improvements
  • From: Damien Le Moal
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Martin K. Petersen
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal
• Re: [PATCH] libata: fix ata_pio_sector for CONFIG_HIGHMEM
  • From: Sergei Shtylyov
• [GIT PULL] IXP4xx driver updates for v5.15
  • From: Linus Walleij
• Re: [PATCH 1/5 v2] pata: ixp4xx: Use local dev variable
  • From: Linus Walleij
• [PATCH AUTOSEL 5.13 01/11] libata: fix ata_pio_sector for CONFIG_HIGHMEM
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 1/5] libata: fix ata_pio_sector for CONFIG_HIGHMEM
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 1/5] libata: fix ata_pio_sector for CONFIG_HIGHMEM
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 1/6] libata: fix ata_pio_sector for CONFIG_HIGHMEM
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 1/9] libata: fix ata_pio_sector for CONFIG_HIGHMEM
  • From: Sasha Levin
• Re: [PATCH 2/7] libata: cleanup ata_dev_configure()
  • From: kernel test robot
• Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Johannes Thumshirn
• Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• Re: [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings
  • From: Rob Herring
• Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Bart Van Assche
• Re: [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings
  • From: Rob Herring
• [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH 6/7] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal
• [PATCH 5/7] libata: print feature list on device scan
  • From: Damien Le Moal
• [PATCH 3/7] libata: cleanup NCQ priority handling
  • From: Damien Le Moal
• [PATCH 4/7] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal
• [PATCH 1/7] libata: cleanup device sleep capability detection
  • From: Damien Le Moal
• [PATCH 2/7] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal
• [PATCH 0/7] libata cleanups and improvements
  • From: Damien Le Moal
• [PATCH 5/5 v2] pata: ixp4xx: Rewrite to use device tree
  • From: Linus Walleij
• [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings
  • From: Linus Walleij
• [PATCH 3/5 v2] pata: ixp4xx: Refer to cmd and ctl rather than csN
  • From: Linus Walleij
• [PATCH 2/5 v2] pata: ixp4xx: Use IS_ENABLED() to determine endianness
  • From: Linus Walleij
• [PATCH 1/5 v2] pata: ixp4xx: Use local dev variable
  • From: Linus Walleij
• Re: [GIT PULL] libata updates for 5.14-rc
  • From: pr-tracker-bot
• [GIT PULL] libata updates for 5.14-rc
  • From: Jens Axboe
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal
• Re: [PATCH 4/5] pata: ixp4xx: Add DT bindings
  • From: Rob Herring
• [PATCH 5/5] pata: ixp4xx: Rewrite to use device tree
  • From: Linus Walleij
• [PATCH 4/5] pata: ixp4xx: Add DT bindings
  • From: Linus Walleij
• [PATCH 3/5] pata: ixp4xx: Refer to cmd and ctl rather than csN
  • From: Linus Walleij
• [PATCH 2/5] pata: ixp4xx: Use IS_ENABLED() to determine endianness
  • From: Linus Walleij
• [PATCH 1/5] pata: ixp4xx: Use local dev variable
  • From: Linus Walleij
• [PATCH 0/5] Update and rewrite IXP4xx PATA driver
  • From: Linus Walleij
• Re: [PATCH v1 1/1] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
  • From: Jens Axboe
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Paolo Valente
• [PATCH v1 1/1] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
  • From: Andy Shevchenko
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Hannes Reinecke
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• Re: [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
  • From: Hannes Reinecke
• Re: [PATCH v3 3/4] libata: support concurrent positioning ranges log
  • From: Hannes Reinecke
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Hannes Reinecke
• [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
  • From: Damien Le Moal
• [PATCH v3 3/4] libata: support concurrent positioning ranges log
  • From: Damien Le Moal
• [PATCH v3 2/4] scsi: sd: add concurrent positioning ranges support
  • From: Damien Le Moal
• [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal
• Re: [PATCH v2 1/4] block: Add concurrent positioning ranges support
  • From: kernel test robot
• [PATCH v2 4/4] doc: document sysfs queue/cranges attributes
  • From: Damien Le Moal
• [PATCH v2 3/4] libata: support concurrent positioning ranges log
  • From: Damien Le Moal
• [PATCH v2 2/4] scsi: sd: add concurrent positioning ranges support
  • From: Damien Le Moal
• [PATCH v2 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• [PATCH v2 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal
• Re: [PATCH 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• Re: [PATCH 3/4] libata: support concurrent positioning ranges log
  • From: Damien Le Moal
• Re: [PATCH 2/4] scsi: sd: add concurrent positioning ranges support
  • From: Damien Le Moal
• Re: [PATCH 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• Re: [PATCH 3/4] libata: support concurrent positioning ranges log
  • From: Hannes Reinecke
• Re: [PATCH 2/4] scsi: sd: add concurrent positioning ranges support
  • From: Hannes Reinecke
• Re: [PATCH 1/4] block: Add concurrent positioning ranges support
  • From: Hannes Reinecke
• Re: [PATCH 0/4] Initial support for multi-actuator HDDs
  • From: Hannes Reinecke
• Re: [PATCH 2/4] scsi: sd: add concurrent positioning ranges support
  • From: Dan Carpenter
• [PATCH 3/4] libata: support concurrent positioning ranges log
  • From: Damien Le Moal
• [PATCH 4/4] doc: document sysfs queue/cranges attributes
  • From: Damien Le Moal
• [PATCH 2/4] scsi: sd: add concurrent positioning ranges support
  • From: Damien Le Moal
• [PATCH 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal
• [PATCH 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal
• [Bug 213157] BUG: unable to handle page fault for address: fffbb000, Workqueue: ata_sff ata_sff_pio_task
  • From: bugzilla-daemon
• [Bug 213157] BUG: unable to handle page fault for address: fffbb000, Workqueue: ata_sff ata_sff_pio_task
  • From: bugzilla-daemon
• Re: [PATCH] libata: fix ata_pio_sector for CONFIG_HIGHMEM
  • From: Jens Axboe
• [PATCH] libata: fix ata_pio_sector for CONFIG_HIGHMEM
  • From: Christoph Hellwig
• [PATCH] drivers: ata: Replace DPRINTK with pr_debug and add __func__ in pr_debug
  • From: Abd-Alrhman Masalkhi
• Re: [GIT PULL] libata changes for 5.14-rc1
  • From: pr-tracker-bot
• Re: [PATCH 5/6] FMS: Add the SCSI Get Configuration command.
  • From: Christoph Hellwig
• [GIT PULL] libata changes for 5.14-rc1
  • From: Jens Axboe
• Re: [PATCH 5/6] FMS: Add the SCSI Get Configuration command.
  • From: kernel test robot
• Re: [PATCH 5/6] FMS: Add the SCSI Get Configuration command.
  • From: kernel test robot
• [PATCH 5/6] FMS: Add the SCSI Get Configuration command.
  • From: Igor Kononenko
• Re: [PATCH] ata: rb532_cf: remove redundant codes
  • From: Jens Axboe
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring
• [PATCH] ata: rb532_cf: remove redundant codes
  • From: 13145886936
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Geert Uytterhoeven
• Re: remove the legacy ide driver v2
  • From: Jens Axboe
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Arnaud POULIQUEN
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Suman Anna
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Jassi Brar
• Re: [PATCH] ahci: Add support for Dell S140 and later controllers
  • From: Hans de Goede
• Re: [PATCH 00/11] Rid W=1 warnings from ATA
  • From: Lee Jones
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Ulf Hansson
• Re: [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support
  • From: Michael Schmitz
• Re: [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support
  • From: ALeX Kazik
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Wolfram Sang
• Re: remove the legacy ide driver v2
  • From: Jens Axboe
• Re: [PATCH 1/6] pata_cypress: add a module option to disable BM-DMA
  • From: Russell King (Oracle)
• Re: [PATCH 5/6] m68k: use libata instead of the legacy ide driver
  • From: Christoph Hellwig
• Re: [PATCH 5/6] m68k: use libata instead of the legacy ide driver
  • From: Geert Uytterhoeven
• Re: [PATCH 00/21] Rid W=1 warnings from IDE
  • From: Christoph Hellwig
• Re: remove the legacy ide driver v2
  • From: Christoph Hellwig
• Re: remove the legacy ide driver v2
  • From: John Paul Adrian Glaubitz
• [PATCH 5/6] m68k: use libata instead of the legacy ide driver
  • From: Christoph Hellwig
• [PATCH 4/6] ARM: disable CONFIG_IDE in pxa_defconfig
  • From: Christoph Hellwig
• [PATCH 3/6] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Christoph Hellwig
• [PATCH 2/6] alpha: use libata instead of the legacy ide driver
  • From: Christoph Hellwig
• [PATCH 1/6] pata_cypress: add a module option to disable BM-DMA
  • From: Christoph Hellwig
• remove the legacy ide driver v2
  • From: Christoph Hellwig
• Re: [PATCH 00/11] Rid W=1 warnings from ATA
  • From: Jens Axboe
• Re: [PATCH 00/11] Rid W=1 warnings from ATA
  • From: Lee Jones
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Jonathan Cameron
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Mark Brown
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Philipp Zabel
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Marc Kleine-Budde
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Vinod Koul
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Greg Kroah-Hartman
• Re: [PATCH -next] ide-cd: fix warning: variable 'stat' set but not used
  • From: libaokun (A)
• Re: [PATCH -next] ide-cd: fix warning: variable 'stat' set but not used
  • From: Jens Axboe
• Re: [PATCH] ahci: Add support for Dell S140 and later controllers
  • From: Jens Axboe
• [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring
• [PATCH] ahci: Add support for Dell S140 and later controllers
  • From: Charles Rose
• Re: [PATCH -next] ide-cd: fix warning: variable 'stat' set but not used
  • From: libaokun (A)
• Re: [PATCH v2 RESEND] ata: ahci_sunxi: Disable DIPM
  • From: Jens Axboe
• Re: [PATCH 00/21] Rid W=1 warnings from IDE
  • From: Lee Jones
• [PATCH v2 RESEND] ata: ahci_sunxi: Disable DIPM
  • From: Timo Sigurdsson
• Re: libata: big endian bug in VPD page 89 (ATA Information)
  • From: Hannes Reinecke
• libata: big endian bug in VPD page 89 (ATA Information)
  • From: Douglas Gilbert
• Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• Re: [PATCH v3 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Jens Axboe
• [PATCH] ide/falconide: Avoid build failure when CONFIG_ATARI=n
  • From: Finn Thain
• Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Andreas Schwab
• Re: [PATCH v3 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Finn Thain
• Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Geert Uytterhoeven
• Re: [PATCH v3 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Geert Uytterhoeven
• ide: ali14xx: intent to convert driver
  • From: Corentin Labbe
• [PATCH v2 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• [PATCH v2 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: Michael Schmitz
• [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support
  • From: Michael Schmitz
• [PATCH v3] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• [PATCH v3 2/2] m68k/q40: Replace q40ide driver with pata_falcon and falconide
  • From: Finn Thain
• [PATCH v3 1/2] m68k/mac: Replace macide driver with generic platform drivers
  • From: Finn Thain
• [PATCH v3 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Finn Thain
• Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Finn Thain
• Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• Re: [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Michael Schmitz
• Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Jens Axboe
• Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Andreas Schwab
• Re: [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Andreas Schwab
• [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• [PATCH v1 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: Michael Schmitz
• [PATCH v1 0/2] Add APNE PCMCIA 100 Mbit support
  • From: Michael Schmitz
• [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Geert Uytterhoeven
• Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] m68k/q40: Replace q40ide driver with pata_falcon and falconide
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] m68k/mac: Replace macide driver with generic platform drivers
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Michael Schmitz
• Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Finn Thain
• Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Michael Schmitz
• Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Jens Axboe
• Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Christoph Hellwig
• Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Geert Uytterhoeven
• [PATCH v2 2/2] m68k/q40: Replace q40ide driver with pata_falcon and falconide
  • From: Finn Thain
• [PATCH v2 1/2] m68k/mac: Replace macide driver with generic platform drivers
  • From: Finn Thain
• [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
  • From: Finn Thain
• Re: [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: Michael Schmitz
• Re: [PATCH] m68k/q40: Replace q40ide with pata_falcon and falconide
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• Re: [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: Geert Uytterhoeven
• Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Geert Uytterhoeven
• Re: [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: ALeX Kazik
• Re: [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: Michael Schmitz
• Re: [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: Geert Uytterhoeven
• Re: [PATCH 00/21] Rid W=1 warnings from IDE
  • From: Christoph Hellwig
• Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• Re: [PATCH] m68k: Fix multiplatform ISA support
  • From: Michael Schmitz
• Re: [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: Geert Uytterhoeven
• Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Geert Uytterhoeven
• Re: [PATCH] m68k: Fix multiplatform ISA support
  • From: Geert Uytterhoeven
• Re: [PATCH] m68k/q40: Replace q40ide with pata_falcon and falconide
  • From: Michael Schmitz
• Re: [PATCH] m68k/q40: Replace q40ide with pata_falcon and falconide
  • From: Finn Thain
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Brad Boyer
• Re: [PATCH] m68k/q40: Replace q40ide with pata_falcon and falconide
  • From: Michael Schmitz
• [PATCH] m68k/q40: Replace q40ide with pata_falcon and falconide
  • From: Finn Thain
• [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
  • From: Michael Schmitz
• [PATCH RFC 0/2] Add APNE PCMCIA 100 Mbit support
  • From: Michael Schmitz
• [PATCH RFC 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• [PATCH] m68k: Fix multiplatform ISA support
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Finn Thain
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Brad Boyer
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Finn Thain
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Finn Thain
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Brad Boyer
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Geert Uytterhoeven
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Finn Thain
• Re: [PATCH RFC 2/2] m68k: setup_mm.c: set isa_sex for Atari if ATARI_ROM_ISA not used
  • From: Michael Schmitz
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• Re: [PATCH RFC 2/2] m68k: setup_mm.c: set isa_sex for Atari if ATARI_ROM_ISA not used
  • From: Finn Thain
• Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Finn Thain
• [PATCH 21/21] ide: pmac: Staticise local function 'pmac_ide_probe'
  • From: Lee Jones
• [PATCH 19/21] ide: piix: Fix incorrectly documented param 'hwif'
  • From: Lee Jones
• [PATCH 20/21] ide: ide-acpi: Provide missing description for param 'obj_loc'
  • From: Lee Jones
• [PATCH 18/21] ide: ide-io: Document ide_intr()'s param 'irq'
  • From: Lee Jones
• [PATCH 16/21] ide: ide-cd: Demote kernel-doc abuse
  • From: Lee Jones
• [PATCH 17/21] ide: ide-acpi: Mark debugging variable 'bus' as __maybe_unused
  • From: Lee Jones
• [PATCH 15/21] ide: ide-cd_ioctl: Remove unused variable 'stat'
  • From: Lee Jones
• [PATCH 14/21] ide: via82cxxx: Fix misdocumentation of via_set_speed()'s 'hwif' param
  • From: Lee Jones
• [PATCH 13/21] ide: siimage: Fix some incorrectly documented functions/params
  • From: Lee Jones
• [PATCH 12/21] ide: it821x: Fix a couple of incorrectly documented functions
  • From: Lee Jones
• [PATCH 09/21] ide: piix: Remove unused variable 'sitre'
  • From: Lee Jones
• [PATCH 11/21] ide: slc90e66: Remove unused variable 'sitre'
  • From: Lee Jones
• [PATCH 10/21] ide: pdc202xx_new: Supply missing description for 'set_indexed_reg()'s 'value' param
  • From: Lee Jones
• [PATCH 06/21] ide: cs5530: Fix incorrect documentation for function init_chipset_cs5530()
  • From: Lee Jones
• [PATCH 08/21] ide: hpt366: Provide some missing descriptions for 'f_{low,high}'
  • From: Lee Jones
• [PATCH 05/21] ide: ide-proc: Strip out unused fops structure and accompanying call-back
  • From: Lee Jones
• [PATCH 07/21] ide: ide-probe: Fix-up incorrectly documented function probe_for_drive()
  • From: Lee Jones
• [PATCH 03/21] ide: ide-dma-sff: Provide some missing 'param' descriptions
  • From: Lee Jones
• [PATCH 02/21] ide: ide-dma: Document ide_dma_unmap_sg()'s missing 'cmd' param
  • From: Lee Jones
• [PATCH 04/21] ide: ide-io: Fix a few kernel-doc misdemeanours
  • From: Lee Jones
• [PATCH 01/21] ide: alim15x3: Document alim15x3_init_one()'s 'id' param
  • From: Lee Jones
• [PATCH 00/21] Rid W=1 warnings from IDE
  • From: Lee Jones
• Re: [PATCH RFC 2/2] m68k: setup_mm.c: set isa_sex for Atari if ATARI_ROM_ISA not used
  • From: Michael Schmitz
• Re: [PATCH RFC 2/2] m68k: setup_mm.c: set isa_sex for Atari if ATARI_ROM_ISA not used
  • From: Geert Uytterhoeven
• [PATCH RFC 2/2] m68k: setup_mm.c: set isa_sex for Atari if ATARI_ROM_ISA not used
  • From: Michael Schmitz
• [PATCH RFC 0/2] Fix m68k multiplatform ISA support
  • From: Michael Schmitz
• [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
  • From: Michael Schmitz
• [PATCH] ata: libata-pmp: Fix missing error code in sata_pmp_eh_recover()
  • From: Jiapeng Chong
• [libata] 2c76f9f255: stress-ng.copy-file.ops_per_sec -25.9% regression
  • From: kernel test robot
• [PATCH -next] ata: sata_rcar: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: Zhang Qilong
• [PATCH -next] ide-cd: fix warning: variable 'stat' set but not used
  • From: Baokun Li
• [PATCH 11/11] ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  • From: Lee Jones
• [PATCH 10/11] ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  • From: Lee Jones
• [PATCH 09/11] ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  • From: Lee Jones
• [PATCH 08/11] ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  • From: Lee Jones
• [PATCH 07/11] ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  • From: Lee Jones
• [PATCH 06/11] ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  • From: Lee Jones
• [PATCH 05/11] ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  • From: Lee Jones
• [PATCH 04/11] ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  • From: Lee Jones
• [PATCH 03/11] ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  • From: Lee Jones
• [PATCH 02/11] ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  • From: Lee Jones
• [PATCH 00/11] Rid W=1 warnings from ATA
  • From: Lee Jones
• [PATCH 01/11] ata: include: libata: Move fields commonly over-written to separate MACRO
  • From: Lee Jones
• Re: [PATCH v2] pata_ep93xx: fix deferred probing
  • From: Sergey Shtylyov
• Re: [PATCH v2] pata_ep93xx: fix deferred probing
  • From: Jens Axboe
• Re: [PATCH v2] pata_ep93xx: fix deferred probing
  • From: Sergey Shtylyov
• [PATCH] ide: Remove unused variable ide_media_proc_fops
  • From: Hyeonggon Yoo
• Re: [LSF/MM/BPF TOPIC] Memory folios
  • From: Hannes Reinecke
• Re: [LSF/MM/BPF TOPIC] Memory folios
  • From: Keith Busch
• Re: [PATCH] libata: configure max sectors properly
  • From: Martin K. Petersen
• [PATCH] libata: configure max sectors properly
  • From: chenxiang
• [Bug 213157] New: BUG: unable to handle page fault for address: fffbb000, Workqueue: ata_sff ata_sff_pio_task
  • From: bugzilla-daemon
• [Bug 213157] BUG: unable to handle page fault for address: fffbb000, Workqueue: ata_sff ata_sff_pio_task
  • From: bugzilla-daemon
• Re: [PATCH] sata_highbank: fix deferred probing
  • From: Sergey Shtylyov
• Re: [PATCH] sata_highbank: fix deferred probing
  • From: Geert Uytterhoeven
• Re: [PATCH] pata_octeon_cf: avoid WARN_ON() in ata_host_activate()
  • From: Jens Axboe
• Re: [PATCH] pata_rb532_cf: fix deferred probing
  • From: Jens Axboe
• Re: [PATCH] sata_highbank: fix deferred probing
  • From: Jens Axboe
• [PATCH] pata_octeon_cf: avoid WARN_ON() in ata_host_activate()
  • From: Sergey Shtylyov
• Re: [PATCH] pata_rb532_cf: fix deferred probing
  • From: Sergey Shtylyov
• Re: [PATCH] sata_highbank: fix deferred probing
  • From: Sergey Shtylyov
• Re: [PATCH RESEND][next] ide: Fix fall-through warnings for Clang
  • From: Gustavo A. R. Silva
• Re: [PATCH] sata: nv: fix debug format string mismatch
  • From: Jens Axboe
• Re: [PATCH] sata: fsl: fix DPRINTK format string
  • From: Jens Axboe
• Re: [PATCH v2 1/1] ata: Replace inclusion of kernel.h by bits.h in the header
  • From: Jens Axboe
• Re: [PATCH v2 1/1] ata: Replace inclusion of kernel.h by bits.h in the header
  • From: Andy Shevchenko
• Re: [LSF/MM/BPF TOPIC] Memory folios
  • From: Christoph Hellwig
• [PATCH] sata: fsl: fix DPRINTK format string
  • From: Arnd Bergmann
• Re: [LSF/MM/BPF TOPIC] Memory folios
  • From: Matthew Wilcox
• [PATCH] sata: nv: fix debug format string mismatch
  • From: Arnd Bergmann
• [PATCH] pata: ixp4xx: split platform data to its own header
  • From: Linus Walleij
• Re: [PATCH 0/4] Explicitly deny IRQ0 in the libata drivers
  • From: Sergey Shtylyov
• Re: [PATCH v2 3/3] dt-bindings: ata: Add device tree binding fir Mikrotik RB532 PATA controller
  • From: Thomas Bogendoerfer
• Re: [PATCH] dt-bindings: ata: renesas,rcar-sata: Make power-domains and resets required
  • From: Rob Herring
• Re: [PATCH v2 3/3] dt-bindings: ata: Add device tree binding fir Mikrotik RB532 PATA controller
  • From: Rob Herring
• Re: [PATCH v6 0/3] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Bjorn Helgaas
• [PATCH AUTOSEL 5.4 29/57] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 045/100] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: Sasha Levin
• [PATCH AUTOSEL 5.11 056/115] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: Sasha Levin
• [PATCH AUTOSEL 5.12 066/134] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: Sasha Levin
• [bug report] ata: ahci: ceva: Update the driver to support xilinx GT phy
  • From: Dan Carpenter
• [PATCH v2] ata: ahci_sunxi: Disable DIPM
  • From: Timo Sigurdsson
• [PATCH v6 2/3] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Jim Quinlan
• [PATCH v6 0/3] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Jim Quinlan
• [PATCH] dt-bindings: ata: renesas,rcar-sata: Make power-domains and resets required
  • From: Geert Uytterhoeven
• Re: [GIT PULL] libata changes for 5.13-rc
  • From: pr-tracker-bot
• Re: [PATCH v5 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Florian Fainelli
• Re: [PATCH v5 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Bjorn Helgaas
• Re: [PATCH v5 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Jim Quinlan
• Re: [PATCH v5 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Bjorn Helgaas
• [PATCH v2 3/3] dt-bindings: ata: Add device tree binding fir Mikrotik RB532 PATA controller
  • From: Thomas Bogendoerfer
• [PATCH v2 2/3] ata: pata_rb532: Add device tree support
  • From: Thomas Bogendoerfer
• [PATCH v2 1/3] ata: pata_rb532: Make driver COMPILE_TESTable
  • From: Thomas Bogendoerfer
• Re: [PATCH] ata: ahci_sunxi: Disable DIPM
  • From: Sergei Shtylyov
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Geert Uytterhoeven
• Re: [PATCH] ata: ahci_sunxi: Disable DIPM
  • From: Greg KH
• [PATCH] ata: ahci_sunxi: Disable DIPM
  • From: Timo Sigurdsson
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Michael Schmitz
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Michael Schmitz
• [GIT PULL] libata changes for 5.13-rc
  • From: Jens Axboe
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: John Paul Adrian Glaubitz
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Sergei Shtylyov
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Finn Thain
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Michael Schmitz
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: John Paul Adrian Glaubitz
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Finn Thain
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Finn Thain
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Michael Schmitz
• Re: [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: John Paul Adrian Glaubitz
• [PATCH] m68k/mac: Replace macide driver with generic platform driver
  • From: Finn Thain
• [PATCH 2/2] tx4939ide: fix deferred probing
  • From: Sergey Shtylyov
• [PATCH 1/2] tx4938ide: fix deferred probing
  • From: Sergey Shtylyov
• [PATCH 0/2] Fix deferred probing for the Toshiba TX493x IDE drivers
  • From: Sergey Shtylyov
• Re: [PATCH RESEND][next] ide: Fix fall-through warnings for Clang
  • From: Gustavo A. R. Silva
• Re: [PATCH 092/141] libata: Fix fall-through warnings for Clang
  • From: Gustavo A. R. Silva
• Re: [PATCH] ata: pata_rb532: Add OF support and make COMPILE_TESTable
  • From: Thomas Bogendoerfer
• Re: [PATCH 092/141] libata: Fix fall-through warnings for Clang
  • From: Gustavo A. R. Silva
• Re: [PATCH 092/141] libata: Fix fall-through warnings for Clang
  • From: Jens Axboe
• Re: [PATCH] ata: pata_rb532: Add OF support and make COMPILE_TESTable
  • From: Sergei Shtylyov
• [PATCH] ata: pata_rb532: Add OF support and make COMPILE_TESTable
  • From: Thomas Bogendoerfer
• [PATCH] ata_piix: Fix uninitialized use in piix_check_450nx_errata()
  • From: Yizhuo Zhai
• [PATCH] piix: Fix uninitialized use in piix_check_450nx()
  • From: Yizhuo Zhai
• Re: [PATCH] MAINTAINERS: Remove me from IDE/ATAPI section
  • From: Borislav Petkov
• Re: [PATCH] MAINTAINERS: Remove me from IDE/ATAPI section
  • From: Christoph Hellwig
• [PATCH] MAINTAINERS: Remove me from IDE/ATAPI section
  • From: Borislav Petkov
• [PATCH] ide-cd: remove useless variable
  • From: Jiapeng Chong
• [PATCH v2] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: angkery
• Re: [PATCH v1] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: Sergei Shtylyov
• Re: [PATCH] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: Sergei Shtylyov
• [PATCH v1] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: angkery
• Re: [PATCH] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: angkery
• Re: [PATCH] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: Sergei Shtylyov
• Re: [PATCH] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: Sergei Shtylyov
• [PATCH v2 1/1] ata: Replace inclusion of kernel.h by bits.h in the header
  • From: Andy Shevchenko
• Re: [PATCH] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: Jens Axboe
• Re: [PATCH v2] ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  • From: Jens Axboe
• [PATCH] pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  • From: angkery
• Re: [PATCH v2] ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  • From: Thierry Reding
• Re: [PATCH v2] ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  • From: Dmitry Osipenko
• [PATCH v2] ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  • From: Sowjanya Komatineni
• [PATCH v2] Follow up patch to Tegra186 AHCI support patch series
  • From: Sowjanya Komatineni
• Re: [PATCH v1] ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  • From: Sowjanya Komatineni
• Re: [PATCH v1] ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  • From: Dmitry Osipenko
• [PATCH v1] ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  • From: Sowjanya Komatineni
• [PATCH v1] Follow up patch to Tegra186 AHCI support patch series
  • From: Sowjanya Komatineni
• Re: [PATCH v4 3/3] ata: ahci_tegra: Add AHCI support for Tegra186
  • From: Dmitry Osipenko
• Re: [PATCH v4 3/3] ata: ahci_tegra: Add AHCI support for Tegra186
  • From: Thierry Reding
• [PATCH] ide: Remove useless variable
  • From: Jiapeng Chong
• [PATCH 1/1] ide: remove unused local variable 'sitre'
  • From: Zhen Lei
• Re: [PATCH v4 3/3] ata: ahci_tegra: Add AHCI support for Tegra186
  • From: Dmitry Osipenko
• Re: [PATCH v4 3/3] ata: ahci_tegra: Add AHCI support for Tegra186
  • From: Sowjanya Komatineni
• Re: [PATCH v4 3/3] ata: ahci_tegra: Add AHCI support for Tegra186
  • From: Sowjanya Komatineni
• Re: [PATCH v4 3/3] ata: ahci_tegra: Add AHCI support for Tegra186
  • From: Dmitry Osipenko
• Re: [PATCH v1 1/1] ata: Drop unneeded inclusion of kernel.h in the header
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] ata: Drop unneeded inclusion of kernel.h in the header
  • From: Jens Axboe
• Re: [PATCH v1 1/1] ata: Drop unneeded inclusion of kernel.h in the header
  • From: Andy Shevchenko
• Re: [PATCH v4 0/3] Add AHCI support for Tegra186
  • From: Thierry Reding
• [PATCH v1 1/1] ata: Add bits.h inclusion
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] ata: Drop unneeded inclusion of kernel.h in the header
  • From: Jens Axboe
• Re: [PATCH v1 1/1] ata: Drop unneeded inclusion of kernel.h in the header
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] ata: Drop unneeded inclusion of kernel.h in the header
  • From: kernel test robot
• Re: [PATCH v4 0/3] Add AHCI support for Tegra186
  • From: Jens Axboe
• Re: [PATCH v1 1/1] ata: Drop unneeded inclusion of kernel.h in the header
  • From: Jens Axboe
• Re: [PATCH v4 3/3] ata: ahci_tegra: Add AHCI support for Tegra186
  • From: Thierry Reding
• Re: [PATCH v4 2/3] dt-binding: ata: tegra: Add dt-binding documentation for Tegra186
  • From: Thierry Reding
• Re: [PATCH v4 1/3] dt-bindings: ata: tegra: Convert binding documentation to YAML
  • From: Thierry Reding
• [PATCH v1 1/1] ata: Drop unneeded inclusion of kernel.h in the header
  • From: Andy Shevchenko
• [PATCH 1/1] ide: remove unused static variable 'ide_media_proc_fops'
  • From: Zhen Lei
• [PATCH v4 2/3] dt-binding: ata: tegra: Add dt-binding documentation for Tegra186
  • From: Sowjanya Komatineni
• [PATCH v4 1/3] dt-bindings: ata: tegra: Convert binding documentation to YAML
  • From: Sowjanya Komatineni
• [PATCH v4 3/3] ata: ahci_tegra: Add AHCI support for Tegra186
  • From: Sowjanya Komatineni
• [PATCH v4 0/3] Add AHCI support for Tegra186
  • From: Sowjanya Komatineni
• Re: [PATCH v5 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Florian Fainelli
• Re: [PATCH v5 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Lorenzo Pieralisi
• Re: [PATCH 0/3] ata: Module parameter clean-ups for pata_legacy and pata_platform
  • From: Jens Axboe
• Re: [PATCH v5 1/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Jens Axboe
• Re: [PATCH V2] ata: ahci: ceva: Updated code by using dev_err_probe()
  • From: Jens Axboe
• Re: [PATCH v5 1/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Lorenzo Pieralisi
• Re: [PATCH V2] ata: ahci: ceva: Updated code by using dev_err_probe()
  • From: Michal Simek
• [PATCH -next] ide: Remove unused inline function ide_dma_verbose()
  • From: YueHaibing
• Re: [PATCH v1] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: Jens Axboe
• Re: [PATCH v1] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: luojiaxing
• Re: [PATCH v2] ata: libahci_platform: fix IRQ check
  • From: Jens Axboe
• Re: [PATCH] sata_mv: add IRQ checks
  • From: Jens Axboe
• Re: [PATCH 00/15] [Set 2] Rid W=1 warnings from ATA
  • From: Jens Axboe
• Re: [PATCH 00/15] [Set 2] Rid W=1 warnings from ATA
  • From: Lee Jones
• Re: [PATCH] libata: Increase the timeout of command ATA_CMD_READ_LOG_DMA_EXT
  • From: chenxiang (M)
• Re: [PATCH] PCI: Remove pci_try_set_mwi
  • From: Bjorn Helgaas
• Re: [PATCH] PCI: Remove pci_try_set_mwi
  • From: Heiner Kallweit
• [PATCH] sata_mv: add IRQ checks
  • From: Sergey Shtylyov
• Re: [PATCH 0/2] Correctly handle plaform_get_irq()'s result in the libata drivers
  • From: Jens Axboe
• Re: [PATCH] PCI: Remove pci_try_set_mwi
  • From: Bjorn Helgaas
• Re: [PATCH] PCI: Remove pci_try_set_mwi
  • From: Andy Shevchenko
• Re: [PATCH] PCI: Remove pci_try_set_mwi
  • From: Bjorn Helgaas
• Re: [PATCH 1/2] pata_arasan_cf: fix IRQ check
  • From: Viresh Kumar
• [PATCH 2/2] pata_ipx4xx_cf: fix IRQ check
  • From: Sergey Shtylyov
• [PATCH 1/2] pata_arasan_cf: fix IRQ check
  • From: Sergey Shtylyov
• [PATCH 0/2] Correctly handle plaform_get_irq()'s result in the libata drivers
  • From: Sergey Shtylyov
• Re: [PATCH 08/10] MIPS: disable CONFIG_IDE in malta*_defconfig
  • From: Thomas Bogendoerfer
• Re: [PATCH 04/10] MIPS: disable CONFIG_IDE in sb1250_swarm_defconfig
  • From: Thomas Bogendoerfer
• Re: [PATCH 07/10] MIPS: disable CONFIG_IDE in bigsur_defconfig
  • From: Thomas Bogendoerfer
• Re: [PATCH 05/10] MIPS: switch workpad_defconfig from legacy IDE to libata
  • From: Thomas Bogendoerfer
• Re: [PATCH 06/10] MIPS: disable CONFIG_IDE in rbtx49xx_defconfig
  • From: Thomas Bogendoerfer
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Cye Borg
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Russell King - ARM Linux admin
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Russell King - ARM Linux admin
• a problem with SATA hotswap
  • From: Tomas Henzl
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Cye Borg
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Russell King - ARM Linux admin
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Russell King - ARM Linux admin
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Cye Borg
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: John Paul Adrian Glaubitz
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Christoph Hellwig
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Christoph Hellwig
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Russell King - ARM Linux admin
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Christoph Hellwig
• [PATCH v2 1/2] driver: ahci: Allow disabling dlpm for all bios version
  • From: Gwendal Grignou
• [PATCH v2 0/2] Disable SATA DPLM on Fizz chromebox
  • From: Gwendal Grignou
• [PATCH v2 2/2] driver: ahci: Disable DLPM on Fizz chromebox
  • From: Gwendal Grignou
• Re: [PATCH 3/3] pata_legacy: Add `probe_mask' parameter like with ide-generic
  • From: Christoph Hellwig
• Re: [PATCH 2/3] pata_platform: Document `pio_mask' module parameter
  • From: Christoph Hellwig
• Re: [PATCH 1/3] pata_legacy: Properly document module parameters
  • From: Christoph Hellwig
• [PATCH 3/3] pata_legacy: Add `probe_mask' parameter like with ide-generic
  • From: Maciej W. Rozycki
• [PATCH 2/3] pata_platform: Document `pio_mask' module parameter
  • From: Maciej W. Rozycki
• [PATCH 1/3] pata_legacy: Properly document module parameters
  • From: Maciej W. Rozycki
• [PATCH 0/3] ata: Module parameter clean-ups for pata_legacy and pata_platform
  • From: Maciej W. Rozycki
• Re: [PATCH 4/4] pata_imx: deny IRQ0
  • From: Fabio Estevam
• [PATCH 4/4] pata_imx: deny IRQ0
  • From: Sergey Shtylyov
• [PATCH 3/4] pata_ftide010: deny IRQ0
  • From: Sergey Shtylyov
• [PATCH 2/4] pata_ep93xx: deny IRQ0
  • From: Sergey Shtylyov
• [PATCH 1/4] pata_bk3710: deny IRQ0
  • From: Sergey Shtylyov
• [PATCH 0/4] Explicitly deny IRQ0 in the libata drivers
  • From: Sergey Shtylyov
• Re: remove the legacy ide driver
  • From: John Paul Adrian Glaubitz
• [PATCH v2] pata_ep93xx: fix deferred probing
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] driver: ahci: Allow disabling dlpm for all bios version
  • From: Sergei Shtylyov
• Re: [PATCH 10/10] ide: remove the legacy ide driver
  • From: Maciej W. Rozycki
• Re: [PATCH 10/10] ide: remove the legacy ide driver
  • From: Maciej W. Rozycki
• [PATCH 0/2] Disable SATA DPLM on Fizz chromebox
  • From: Gwendal Grignou
• [PATCH 1/2] driver: ahci: Allow disabling dlpm for all bios version
  • From: Gwendal Grignou
• [PATCH 2/2] driver: ahci: Disable DLPM on Fizz chromebox
  • From: Gwendal Grignou
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Andrew Lunn
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Marcin Wojtas
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Andrew Lunn
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Mark Kettenis
• Re: [PATCH] pata_ep93xx: fix deferred probing
  • From: Sergey Shtylyov
• [PATCH] pata_ep93xx: fix deferred probing
  • From: Sergey Shtylyov
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Russell King - ARM Linux admin
• Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Russell King - ARM Linux admin
• Re: remove the legacy ide driver
  • From: Maciej W. Rozycki
• Re: [PATCH 01/10] alpha: use libata instead of the legacy ide driver
  • From: Serge Belyshev
• Re: [PATCH 08/10] MIPS: disable CONFIG_IDE in malta*_defconfig
  • From: Christoph Hellwig
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Marcin Wojtas
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Marc Zyngier
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Sven Auhagen
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Marcin Wojtas
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Gregory CLEMENT
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Gregory CLEMENT
• Re: remove the legacy ide driver
  • From: Christoph Hellwig
• Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem
  • From: Marcin Wojtas
• Re: remove the legacy ide driver
  • From: Finn Thain
• Re: [PATCH 04/10] MIPS: disable CONFIG_IDE in sb1250_swarm_defconfig
  • From: Maciej W. Rozycki
• Re: [PATCH 01/10] alpha: use libata instead of the legacy ide driver
  • From: Måns Rullgård
• Re: [PATCH 01/10] alpha: use libata instead of the legacy ide driver
  • From: Måns Rullgård
• Re: [PATCH 08/10] MIPS: disable CONFIG_IDE in malta*_defconfig
  • From: Thomas Bogendoerfer
• [RFC PATCH] ata: add lun validity check on ata_sas_queuecmd
  • From: Wu Bo
• Re: [PATCH 08/10] MIPS: disable CONFIG_IDE in malta*_defconfig
  • From: Sergei Shtylyov
• Re: [PATCH 07/10] MIPS: disable CONFIG_IDE in bigsur_defconfig
  • From: Sergei Shtylyov
• [PATCH 12/15] ata: pata_cs5530: Fix misspelling of 'cs5530_init_one()'s 'pdev' param
  • From: Lee Jones
• [PATCH 14/15] ata: libata-acpi: Fix function name and provide description for 'prev_gtf'
  • From: Lee Jones
• [PATCH 15/15] ata: pata_acpi: Fix some incorrect function param descriptions
  • From: Lee Jones
• [PATCH 11/15] ata: pata_legacy: Repair a couple kernel-doc problems
  • From: Lee Jones
• [PATCH 13/15] ata: sata_mv: Fix misnaming of 'mv_bmdma_stop()'
  • From: Lee Jones
• [PATCH 09/15] ata: pata_opti: Fix spelling issue of 'val' in 'opti_write_reg()'
  • From: Lee Jones
• [PATCH 10/15] ata: ata_generic: Fix misspelling of 'ata_generic_init_one()'
  • From: Lee Jones
• [PATCH 06/15] ata: pata_via: Fix a kernel-doc formatting issue
  • From: Lee Jones
• [PATCH 07/15] ata: pata_piccolo: 'ata_tosh_init()' is misnamed in its header
  • From: Lee Jones
• [PATCH 08/15] ata: pata_sl82c105: Fix potential doc-rot
  • From: Lee Jones
• [PATCH 05/15] ata: pata_it821x: Fix possible doc-rotted function names
  • From: Lee Jones
• [PATCH 01/15] ata: pata_pdc202xx_old: Fix some incorrectly named functions
  • From: Lee Jones
• [PATCH 03/15] ata: pata_sis: Remove superfluous param description and supply another
  • From: Lee Jones
• [PATCH 04/15] ata: pata_triflex: Repair some misnamed functions and fix some param descriptions
  • From: Lee Jones
• [PATCH 02/15] ata: pata_sil680: Add some missing function parameter docs
  • From: Lee Jones
• [PATCH 00/15] [Set 2] Rid W=1 warnings from ATA
  • From: Lee Jones
• Re: [PATCH 01/10] alpha: use libata instead of the legacy ide driver
  • From: John Paul Adrian Glaubitz
• Re: [PATCH 01/10] alpha: use libata instead of the legacy ide driver
  • From: Al Viro
• Re: [PATCH 01/10] alpha: use libata instead of the legacy ide driver
  • From: Christoph Hellwig
• [PATCH 09/10] m68k: use libata instead of the legacy ide driver
  • From: Christoph Hellwig
• [PATCH 08/10] MIPS: disable CONFIG_IDE in malta*_defconfig
  • From: Christoph Hellwig
• [PATCH 07/10] MIPS: disable CONFIG_IDE in bigsur_defconfig
  • From: Christoph Hellwig
• [PATCH 06/10] MIPS: disable CONFIG_IDE in rbtx49xx_defconfig
  • From: Christoph Hellwig
• [PATCH 05/10] MIPS: switch workpad_defconfig from legacy IDE to libata
  • From: Christoph Hellwig
• [PATCH 04/10] MIPS: disable CONFIG_IDE in sb1250_swarm_defconfig
  • From: Christoph Hellwig
• [PATCH 03/10] ARM: disable CONFIG_IDE in pxa_defconfig
  • From: Christoph Hellwig
• [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
  • From: Christoph Hellwig
• [PATCH 01/10] alpha: use libata instead of the legacy ide driver
  • From: Christoph Hellwig
• remove the legacy ide driver
  • From: Christoph Hellwig
• [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG
  • From: Reimar Döffinger
• Re: AHCI SATA Runtime PM
  • From: Hans de Goede
• Re: Kernel panic caused by plugging in a sata cable on a a minipcie-sata board
  • From: Pali Rohár
• Re: Kernel panic caused by plugging in a sata cable on a a minipcie-sata board
  • From: Rötti
• [PATCH v2] ata: libahci_platform: fix IRQ check
  • From: Sergey Shtylyov
• Re: [PATCH] ata: libahci_platform: fix IRQ check
  • From: Sergey Shtylyov
• [PATCH] ata: libahci_platform: fix IRQ check
  • From: Sergey Shtylyov
• Re: Kernel panic caused by plugging in a sata cable on a a minipcie-sata board
  • From: Pali Rohár
• [PATCH] pata_rb532_cf: fix deferred probing
  • From: Sergey Shtylyov
• Re: [PATCH v1] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: luojiaxing
• Re: [PATCH V3] ata: sata_highbank: delete redundant print and fix return value
  • From: Sergei Shtylyov
• [PATCH V3] ata: sata_highbank: delete redundant print and fix return value
  • From: Wang Qing
• [PATCH V2] ata: sata_highbank: delete redundant print and fix return value
  • From: Wang Qing
• [PATCH] sata_highbank: fix deferred probing
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] ata: delete redundant printing of return value
  • From: Hans de Goede
• Re: [PATCH 1/2] ata: delete redundant printing of return value
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] ata: delete redundant printing of return value
  • From: Sergei Shtylyov
• [PATCH 1/2] ata: delete redundant printing of return value
  • From: Wang Qing
• [PATCH 1/2] ata: delete redundant printing of return value
  • From: Wang Qing
• [PATCH v5 1/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Jim Quinlan
• [PATCH v5 0/2] ata: ahci_brcm: Fix use of BCM7216 reset controller
  • From: Jim Quinlan
• Re: [PATCH] ata: Trivial spelling fixes in the file pata_ns87415.c
  • From: Sergei Shtylyov
• Re: [PATCH] ata: Trivial spelling fixes in the file pata_ns87415.c
  • From: Jens Axboe
• Re: [PATCH v1] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: Jens Axboe
• [PATCH v1] ata: ahci: Disable SXS for Hisilicon Kunpeng920
  • From: Luo Jiaxing
• [PATCH] ata: Trivial spelling fixes in the file pata_ns87415.c
  • From: Bhaskar Chowdhury
• Re: [PATCH] ide: fix warning comparing pointer to 0
  • From: Jens Axboe
• [PATCH v2] ide: fix warning comparing pointer to 0
  • From: Jiapeng Chong
• [PATCH] ide: fix warning comparing pointer to 0
  • From: Jiapeng Chong