The ATA_CMD_READ_LOG_DMA_EXT can cause controller/device to become unresponsive until the next power cycle. This seems to particularly affect IDE to SATA adapters, possibly in combination with certain SATA SSDs, though there might be more/different cases. Comment 5 of https://bugzilla.kernel.org/show_bug.cgi?id=195895 is an example. Disable it by default on Crucial MX500 devices and all PATA controllers. Also add an option to set the workaround state, which might help with gathering more data on the exact devices/controllers affected, and speed up narrowing down the cause for users that are affect but not covered by the added quirks. Existing workarounds like forcing PIO mode do not work (in addition to the performance issues) because READ_LOG_DMA is issued even if PIO mode is forced. Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@xxxxxx> --- Documentation/admin-guide/kernel-parameters.txt | 2 ++ drivers/ata/libata-core.c | 14 ++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index bdb22006f713..191502e8fa74 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2551,6 +2551,8 @@ * [no]ncqtrim: Turn off queued DSM TRIM. + * [no]dmalog: Turn off use of ATA_CMD_READ_LOG_DMA_EXT (0x47) command + * nohrst, nosrst, norst: suppress hard, soft and both resets. diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 61c762961ca8..9934f6c465f4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2399,6 +2399,9 @@ int ata_dev_configure(struct ata_device *dev) /* set horkage */ dev->horkage |= ata_dev_blacklisted(dev); + /* Disable READ_LOG_DMA with PATA-SATA adapters, they seem likely to hang */ + if (!(ap->flags & ATA_FLAG_SATA)) + dev->horkage |= ATA_HORKAGE_NO_DMA_LOG; ata_force_horkage(dev); if (dev->horkage & ATA_HORKAGE_DISABLE) { @@ -4000,6 +4003,15 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + /* + * Devices with observed READ_LOG_DMA issues - unclear if only + * specific firmware versions or only in combination with specific + * controllers. + * Specifically broken combinations reported + * CT1000MX500SSD4, M3CR020 with B350M-Mortar + * CT500MX500SSD4, M3CR023 with PATA-SATA adapter + */ + { "Crucial_CT*MX500*", NULL, ATA_HORKAGE_NO_DMA_LOG }, /* End Marker */ { } }; @@ -6104,6 +6116,8 @@ static int __init ata_parse_force_one(char **cur, { "ncq", .horkage_off = ATA_HORKAGE_NONCQ }, { "noncqtrim", .horkage_on = ATA_HORKAGE_NO_NCQ_TRIM }, { "ncqtrim", .horkage_off = ATA_HORKAGE_NO_NCQ_TRIM }, + { "nodmalog", .horkage_on = ATA_HORKAGE_NO_DMA_LOG }, + { "dmalog", .horkage_off = ATA_HORKAGE_NO_DMA_LOG }, { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID }, { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) }, { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) }, -- 2.32.0
