[PATCH AUTOSEL 5.10 045/100] ata: ahci: Disable SXS for Hisilicon Kunpeng920

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Xingui Yang <yangxingui@xxxxxxxxxx>

[ Upstream commit 234e6d2c18f5b080cde874483c4c361f3ae7cffe ]

On Hisilicon Kunpeng920, ESP is set to 1 by default for all ports of
SATA controller. In some scenarios, some ports are not external SATA ports,
and it cause disks connected to these ports to be identified as removable
disks. So disable the SXS capability on the software side to prevent users
from mistakenly considering non-removable disks as removable disks and
performing related operations.

Signed-off-by: Xingui Yang <yangxingui@xxxxxxxxxx>
Signed-off-by: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
Reviewed-by: John Garry <john.garry@xxxxxxxxxx>
Link: https://lore.kernel.org/r/1615544676-61926-1-git-send-email-luojiaxing@xxxxxxxxxx
Signed-off-by: Jens Axboe <axboe@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/ata/ahci.c    | 5 +++++
 drivers/ata/ahci.h    | 1 +
 drivers/ata/libahci.c | 5 +++++
 3 files changed, 11 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 00ba8e5a1ccc..33192a8f687d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1772,6 +1772,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		hpriv->flags |= AHCI_HFLAG_NO_DEVSLP;
 
 #ifdef CONFIG_ARM64
+	if (pdev->vendor == PCI_VENDOR_ID_HUAWEI &&
+	    pdev->device == 0xa235 &&
+	    pdev->revision < 0x30)
+		hpriv->flags |= AHCI_HFLAG_NO_SXS;
+
 	if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
 		hpriv->irq_handler = ahci_thunderx_irq_handler;
 #endif
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 98b8baa47dc5..d1f284f0c83d 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -242,6 +242,7 @@ enum {
 							suspend/resume */
 	AHCI_HFLAG_IGN_NOTSUPP_POWER_ON	= (1 << 27), /* ignore -EOPNOTSUPP
 							from phy_power_on() */
+	AHCI_HFLAG_NO_SXS		= (1 << 28), /* SXS not supported */
 
 	/* ap->flags bits */
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ea5bf5f4cbed..fec2e9754aed 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -493,6 +493,11 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
 		cap |= HOST_CAP_ALPM;
 	}
 
+	if ((cap & HOST_CAP_SXS) && (hpriv->flags & AHCI_HFLAG_NO_SXS)) {
+		dev_info(dev, "controller does not support SXS, disabling CAP_SXS\n");
+		cap &= ~HOST_CAP_SXS;
+	}
+
 	if (hpriv->force_port_map && port_map != hpriv->force_port_map) {
 		dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
 			 port_map, hpriv->force_port_map);
-- 
2.30.2




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux