This rewrites the IXP4xx CF (IDE) libata driver to use the
device tree exclusively to look up its resources:
- Probe exclusively from the device tree and look up all
resources from there.
- Allocate a local state container with devres and pass
this around in .private_data.
- Initialize with struct ata_port_info.
- Use the .set_piomode() callback instead of the much
wider .set_mode(), we only support PIO after all.
- Bump driver version number from 0.2 to 1.0 to reflect this
wider change.
- Get a handle on the expansion bus syscon regmap to alter
the timings on the chip select.
- Put in the more elaborate timing adjustment code for PIO0
to PIO4 in 8 and 16bit mode from the downstream OpenWrt
patch.
The board file initialization path and platform data include
is dropped because the board files will be deleted at the same
time as this patch is merged.
The platform data file is not deleted right now so as not to
conflict with the removal of board files.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/ata/pata_ixp4xx_cf.c | 201 +++++++++++++++++++++++++++--------
1 file changed, 154 insertions(+), 47 deletions(-)
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 72d6d6f2ef99..99c63087c8ae 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -13,45 +13,134 @@
*/
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/libata.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/pata_ixp4xx_cf.h>
+#include <linux/regmap.h>
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.2"
+#define DRV_VERSION "1.0"
-static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
+struct ixp4xx_pata {
+ struct ata_host *host;
+ struct regmap *rmap;
+ u32 cmd_csreg;
+ void __iomem *cmd;
+ void __iomem *ctl;
+};
+
+#define IXP4XX_EXP_TIMING_STRIDE 0x04
+/* The timings for the chipselect is in bits 29..16 */
+#define IXP4XX_EXP_T1_T5_MASK GENMASK(29, 16)
+#define IXP4XX_EXP_PIO_0_8 0x0a470000
+#define IXP4XX_EXP_PIO_1_8 0x06430000
+#define IXP4XX_EXP_PIO_2_8 0x02410000
+#define IXP4XX_EXP_PIO_3_8 0x00820000
+#define IXP4XX_EXP_PIO_4_8 0x00400000
+#define IXP4XX_EXP_PIO_0_16 0x29640000
+#define IXP4XX_EXP_PIO_1_16 0x05030000
+#define IXP4XX_EXP_PIO_2_16 0x00b20000
+#define IXP4XX_EXP_PIO_3_16 0x00820000
+#define IXP4XX_EXP_PIO_4_16 0x00400000
+#define IXP4XX_EXP_BW_MASK (BIT(6)|BIT(0))
+#define IXP4XX_EXP_BYTE_RD16 BIT(6) /* Byte reads on half-word devices */
+#define IXP4XX_EXP_BYTE_EN BIT(0) /* Use 8bit data bus if set */
+
+static void ixp4xx_set_8bit_timing(struct ixp4xx_pata *ixpp, u8 pio_mode)
+{
+ switch (pio_mode) {
+ case XFER_PIO_0:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_0_8);
+ break;
+ case XFER_PIO_1:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_1_8);
+ break;
+ case XFER_PIO_2:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_2_8);
+ break;
+ case XFER_PIO_3:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_3_8);
+ break;
+ case XFER_PIO_4:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_4_8);
+ break;
+ default:
+ break;
+ }
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_BW_MASK, IXP4XX_EXP_BYTE_RD16|IXP4XX_EXP_BYTE_EN);
+}
+
+static void ixp4xx_set_16bit_timing(struct ixp4xx_pata *ixpp, u8 pio_mode)
{
- struct ata_device *dev;
-
- ata_for_each_dev(dev, link, ENABLED) {
- ata_dev_info(dev, "configured for PIO0\n");
- dev->pio_mode = XFER_PIO_0;
- dev->xfer_mode = XFER_PIO_0;
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
+ switch (pio_mode){
+ case XFER_PIO_0:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_0_16);
+ break;
+ case XFER_PIO_1:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_1_16);
+ break;
+ case XFER_PIO_2:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_2_16);
+ break;
+ case XFER_PIO_3:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_3_16);
+ break;
+ case XFER_PIO_4:
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_T1_T5_MASK, IXP4XX_EXP_PIO_4_16);
+ break;
+ default:
+ break;
}
- return 0;
+ regmap_update_bits(ixpp->rmap, ixpp->cmd_csreg,
+ IXP4XX_EXP_BW_MASK, IXP4XX_EXP_BYTE_RD16);
}
+/* This sets up the timing on the chipselect CMD accordingly */
+static void ixp4xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ixp4xx_pata *ixpp = ap->host->private_data;
+
+ ata_dev_printk(adev, KERN_INFO, "configured for PIO%d 8bit\n",
+ adev->pio_mode - XFER_PIO_0);
+ ixp4xx_set_8bit_timing(ixpp, adev->pio_mode);
+}
+
+
static unsigned int ixp4xx_mmio_data_xfer(struct ata_queued_cmd *qc,
- unsigned char *buf, unsigned int buflen, int rw)
+ unsigned char *buf, unsigned int buflen, int rw)
{
unsigned int i;
unsigned int words = buflen >> 1;
u16 *buf16 = (u16 *) buf;
+ struct ata_device *adev = qc->dev;
struct ata_port *ap = qc->dev->link->ap;
void __iomem *mmio = ap->ioaddr.data_addr;
- struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
+ struct ixp4xx_pata *ixpp = ap->host->private_data;
+ unsigned long flags;
+
+ ata_dev_printk(adev, KERN_DEBUG, "%s %d bytes\n", (rw == READ) ? "READ" : "WRITE",
+ buflen);
+ spin_lock_irqsave(ap->lock, flags);
/* set the expansion bus in 16bit mode and restore
* 8 bit mode after the transaction.
*/
- *data->cs0_cfg &= ~(0x01);
- udelay(100);
+ ixp4xx_set_16bit_timing(ixpp, adev->pio_mode);
+ udelay(5);
/* Transfer multiple of 2 bytes */
if (rw == READ)
@@ -76,8 +165,10 @@ static unsigned int ixp4xx_mmio_data_xfer(struct ata_queued_cmd *qc,
words++;
}
- udelay(100);
- *data->cs0_cfg |= 0x01;
+ ixp4xx_set_8bit_timing(ixpp, adev->pio_mode);
+ udelay(5);
+
+ spin_unlock_irqrestore(ap->lock, flags);
return words << 1;
}
@@ -90,19 +181,25 @@ static struct ata_port_operations ixp4xx_port_ops = {
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ixp4xx_mmio_data_xfer,
.cable_detect = ata_cable_40wire,
- .set_mode = ixp4xx_set_mode,
+ .set_piomode = ixp4xx_set_piomode,
+};
+
+static struct ata_port_info ixp4xx_port_info = {
+ .flags = ATA_FLAG_NO_ATAPI,
+ .pio_mask = ATA_PIO4,
+ .port_ops = &ixp4xx_port_ops,
};
static void ixp4xx_setup_port(struct ata_port *ap,
- struct ixp4xx_pata_data *data,
+ struct ixp4xx_pata *ixpp,
unsigned long raw_cmd, unsigned long raw_ctl)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
raw_ctl += 0x06;
- ioaddr->cmd_addr = data->cmd;
- ioaddr->altstatus_addr = data->ctl + 0x06;
- ioaddr->ctl_addr = data->ctl + 0x06;
+ ioaddr->cmd_addr = ixpp->cmd;
+ ioaddr->altstatus_addr = ixpp->ctl + 0x06;
+ ioaddr->ctl_addr = ixpp->ctl + 0x06;
ata_sff_std_ports(ioaddr);
@@ -135,10 +232,12 @@ static void ixp4xx_setup_port(struct ata_port *ap,
static int ixp4xx_pata_probe(struct platform_device *pdev)
{
struct resource *cmd, *ctl;
- struct ata_host *host;
- struct ata_port *ap;
+ struct ata_port_info pi = ixp4xx_port_info;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
struct device *dev = &pdev->dev;
- struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
+ struct device_node *np = dev->of_node;
+ struct ixp4xx_pata *ixpp;
+ u32 csindex;
int ret;
int irq;
@@ -148,20 +247,32 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
if (!cmd || !ctl)
return -EINVAL;
- /* allocate host */
- host = ata_host_alloc(dev, 1);
- if (!host)
+ ixpp = devm_kzalloc(dev, sizeof(*ixpp), GFP_KERNEL);
+ if (!ixpp)
+ return -ENOMEM;
+
+ ixpp->rmap = syscon_node_to_regmap(np->parent);
+ if (IS_ERR(ixpp->rmap))
+ return dev_err_probe(dev, PTR_ERR(ixpp->rmap), "no regmap\n");
+ /* Inspect our address to figure out what chipselect the CMD is on */
+ ret = of_property_read_u32_index(np, "reg", 0, &csindex);
+ if (ret)
+ return dev_err_probe(dev, ret, "can't inspect CMD address\n");
+ dev_info(dev, "using CS%d for PIO timing configuration\n", csindex);
+ ixpp->cmd_csreg = csindex * IXP4XX_EXP_TIMING_STRIDE;
+
+ ixpp->host = ata_host_alloc_pinfo(dev, ppi, 1);
+ if (!ixpp->host)
return -ENOMEM;
+ ixpp->host->private_data = ixpp;
- /* acquire resources and fill host */
ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
if (ret)
return ret;
- data->cmd = devm_ioremap(dev, cmd->start, 0x1000);
- data->ctl = devm_ioremap(dev, ctl->start, 0x1000);
-
- if (!data->cmd || !data->ctl)
+ ixpp->cmd = devm_ioremap_resource(dev, cmd);
+ ixpp->ctl = devm_ioremap_resource(dev, ctl);
+ if (IS_ERR(ixpp->cmd) || IS_ERR(ixpp->ctl))
return -ENOMEM;
irq = platform_get_irq(pdev, 0);
@@ -172,27 +283,23 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
else
return -EINVAL;
- /* Setup expansion bus chip selects */
- *data->cs0_cfg = data->cs0_bits;
- *data->cs1_cfg = data->cs1_bits;
-
- ap = host->ports[0];
-
- ap->ops = &ixp4xx_port_ops;
- ap->pio_mask = ATA_PIO4;
- ap->flags |= ATA_FLAG_NO_ATAPI;
-
- ixp4xx_setup_port(ap, data, cmd->start, ctl->start);
+ /* Just one port to set up */
+ ixp4xx_setup_port(ixpp->host->ports[0], ixpp, cmd->start, ctl->start);
ata_print_version_once(dev, DRV_VERSION);
- /* activate host */
- return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
+ return ata_host_activate(ixpp->host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
}
+static const struct of_device_id ixp4xx_pata_of_match[] = {
+ { .compatible = "intel,ixp4xx-compact-flash", },
+ { },
+};
+
static struct platform_driver ixp4xx_pata_platform_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = ixp4xx_pata_of_match,
},
.probe = ixp4xx_pata_probe,
.remove = ata_platform_remove_one,
--
2.31.1
