Linux IDE Archive
[Prev Page][Next Page]
- [PATCH 1/4] ata: libata-sata: use sysfs_emit()
- [PATCH 4/4] ata: sata_fsl: use sysfs_emit()
- [PATCH 3/4] ata: ahci: use sysfs_emit()
- [PATCH 2/4] ata: libata-scsi: use sysfs_emit()
- [PATCH] ata: ahci_ceva: Fix sparse warning in ceva_ahci_read_id()
- [PATCH 0/4] Cleanup ATA sysfs attribute show functions
- [PATCH] ata: ahci_ceva: Fix sparse warning in ceva_ahci_read_id()
- Re: [PATCH] ata: replace snprintf in show functions with sysfs_emit
- Re: [PATCH 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
- [PATCH 08/14] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
- [PATCH 14/14] dt-bindings: usb: Convert BDC to YAML
- [PATCH 13/14] dt-bindings: bus: Convert GISB arbiter to YAML
- [PATCH 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
- [PATCH 11/14] dt-bindings: thermal: Convert Broadcom TMON to YAML
- [PATCH 10/14] dt-bindings: rng: Convert iProc RNG200 to YAML
- [PATCH 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- [PATCH 07/14] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- [PATCH 06/14] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
- [PATCH 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- [PATCH 04/14] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
- [PATCH 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- [PATCH 02/14] dt-bindings: reset: Convert Broadcom STB reset to YAML
- [PATCH 01/14] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
- [PATCH 00/14] Broadcom DT bindings updates to YAML
- [PATCH] ata: replace snprintf in show functions with sysfs_emit
- RE: [PATCH AUTOSEL 5.15 27/39] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
- RE: [PATCH AUTOSEL 5.15 28/39] ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
- Re: [PATCH -next V5 0/2] fix two bugs when trying rmmod sata_fsl
- Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
- Re: [PATCH v2] pata_falcon: Avoid type warnings from sparse
- Re: [PATCH] ata: pata_ali: no need to initialise statics to 0
- Re: [PATCH v2] pata_falcon: Avoid type warnings from sparse
- Re: [PATCH v2] pata_falcon: Avoid type warnings from sparse
- Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
- Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
- Re: [PATCH -next V5 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [PATCH -next V5 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- Re: [PATCH -next V5 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [PATCH -next V5 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- Re: [PATCH -next V5 0/2] fix two bugs when trying rmmod sata_fsl
- [PATCH AUTOSEL 4.19 11/15] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
- [PATCH AUTOSEL 5.4 14/19] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
- [PATCH AUTOSEL 5.10 21/28] ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
- [PATCH AUTOSEL 5.10 20/28] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
- [PATCH AUTOSEL 5.15 28/39] ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
- [PATCH AUTOSEL 5.15 27/39] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
- Re: [PATCH -next V5 0/2] fix two bugs when trying rmmod sata_fsl
- [PATCH -next V5 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- [PATCH -next V5 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- [PATCH -next V5 0/2] fix two bugs when trying rmmod sata_fsl
- Re: [PATCH -next V4 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [PATCH -next V4 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [PATCH] pata_falcon: Add missing __iomem annotations
- [PATCH v2] pata_falcon: Avoid type warnings from sparse
- Re: [PATCH] pata_falcon: Add missing __iomem annotations
- Re: [PATCH] pata_falcon: Add missing __iomem annotations
- Re: [PATCH] pata_falcon: Add missing __iomem annotations
- Re: [PATCH] pata_falcon: Add missing __iomem annotations
- Re: [PATCH] pata_falcon: Add missing __iomem annotations
- Re: [PATCH] pata_falcon: Add missing __iomem annotations
- Re: [PATCH] pata_falcon: Add missing __iomem annotations
- [PATCH] pata_falcon: Add missing __iomem annotations
- [PATCH -next V4 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- [PATCH -next V4 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- [PATCH -next V4 0/2] fix two bugs when trying rmmod sata_fsl
- Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- [PATCH -next V3 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- [PATCH -next V3 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- [PATCH -next V3 0/2] fix two bugs when trying rmmod sata_fsl
- Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- [PATCH -next V2 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- [PATCH -next V2 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- [PATCH -next V2 0/2] fix two bugs when trying rmmod sata_fsl
- Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- Re: [GIT PULL] libata fixes for 5.16-rc2
- Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- [GIT PULL] libata fixes for 5.16-rc2
- Re: [GIT PULL] libata fixes for 5.16-rc2
- Re: [GIT PULL] libata fixes for 5.16-rc2
- Re: [GIT PULL] libata fixes for 5.16-rc2
- Re: [GIT PULL] libata fixes for 5.16-rc2
- Re: [GIT PULL] libata fixes for 5.16-rc2
- Re: [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- [GIT PULL] libata fixes for 5.16-rc2
- [PATCH -next 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
- [PATCH -next 2/2] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
- [PATCH -next 0/2] fix two bugs when trying rmmod sata_fsl
- Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
- Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
- Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
- Re: [PATCH] sata_fsl: Use struct_group() for memcpy() region
- [PATCH] sata_fsl: Use struct_group() for memcpy() region
- RE: [PATCH 2/2] ata: Adjust behavior when StorageD3Enable _DSD is set
- Re: [PATCH 2/2] ata: Adjust behavior when StorageD3Enable _DSD is set
- Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
- Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
- Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
- Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
- [PATCH 2/2] libata: core: add missing ata_identify_page_supported() calls
- [PATCH 1/2] libata: core: improve ata_read_log_page() error message
- [PATCH 0/2] Fix log page accesses
- Re: PROBLEM: [drivers/ata] Read log page failed (boot error message)
- PROBLEM: [drivers/ata] Read log page failed (boot error message)
- [PATCH] ata: pata_ali: no need to initialise statics to 0
- Re: [GIT PULL] second round of libata changes for 5.16-rc1
- [PATCH 2/2] ata: Adjust behavior when StorageD3Enable _DSD is set
- [PATCH 1/2] ahci: Add Green Sardine vendor ID as board_ahci_mobile
- [GIT PULL] second round of libata changes for 5.16-rc1
- Re: [PATCH] scsi: fix scsi device attributes registration
- Re: [PATCH V2] libata: add horkage for missing Identify Device log
- Re: [PATCH] scsi: fix scsi device attributes registration
- Re: [PATCH] scsi: fix scsi device attributes registration
- Re: Problem with scsi device sysfs attributes
- [PATCH] scsi: fix scsi device attributes registration
- Re: [PATCH V2] libata: add horkage for missing Identify Device log
- Re: [PATCH] libata: libahci: declare ahci_shost_attr_group as static
- Re: [PATCH V2] libata: add horkage for missing Identify Device log
- Re: Problem with scsi device sysfs attributes
- [PATCH] libata: libahci: declare ahci_shost_attr_group as static
- Problem with scsi device sysfs attributes
- [PATCH V2] libata: add horkage for missing Identify Device log
- Re: [PATCH] libata: add horkage for missing Identify Device log
- Re: [PATCH] libata: add horkage for missing Identify Device log
- Re: [PATCH] libata: add horkage for missing Identify Device log
- Re: [PATCH] ata: sata_highbank: Remove unnecessary print function dev_err()
- [PATCH] libata: add horkage for missing Identify Device log
- Re: [PATCH] libata: fix read log timeout value
- Re: [PATCH] libata: fix read log timeout value
- [PATCH] libata: fix read log timeout value
- [PATCH] ata: sata_highbank: Remove unnecessary print function dev_err()
- Re: [PATCH v9 3/5] libata: support concurrent positioning ranges log
- Re: [GIT PULL] libata changes for 5.16-rc1
- Re: [PATCH v9 3/5] libata: support concurrent positioning ranges log
- Re: [PATCH v9 3/5] libata: support concurrent positioning ranges log
- Re: [PATCH v9 3/5] libata: support concurrent positioning ranges log
- [GIT PULL] libata changes for 5.16-rc1
- [PATCH] dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support
- Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: (subset) [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: (subset) [PATCH v9 0/5] Initial support for multi-actuator HDDs
- [PATCH v9 5/5] doc: Fix typo in request queue sysfs documentation
- [PATCH v9 4/5] doc: document sysfs queue/independent_access_ranges attributes
- [PATCH v9 3/5] libata: support concurrent positioning ranges log
- [PATCH v9 2/5] scsi: sd: add concurrent positioning ranges support
- [PATCH v9 1/5] block: Add independent access ranges support
- [PATCH v9 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: [GIT PULL] libata fixes for 5.15-rc7
- [GIT PULL] libata fixes for 5.15-rc7
- Re: [PATCH v2] ata: sata_mv: Fix the error handling of mv_chip_id()
- Re: Potential null-pointer-dereference problem due to missing null-checking for ata_timing_find_mode
- Re: [PATCH] ata: sata_mv: Fix the return value of the probe function
- [PATCH v2] ata: sata_mv: Fix the error handling of mv_chip_id()
- Re: [PATCH] ata: sata_mv: Fix the return value of the probe function
- Re: [PATCH] ata: sata_mv: Fix the return value of the probe function
- Re: [PATCH] ata: sata_mv: Fix the return value of the probe function
- Re: [PATCH] ata: sata_mv: Fix the return value of the probe function
- Re: [PATCH] ata: sata_mv: Fix the return value of the probe function
- [PATCH] ata: sata_mv: Fix the return value of the probe function
- Re: [PATCH] scsi: ata: make ahci_sdev_attrs static
- Re: [PATCH] scsi: ata: make ahci_sdev_attrs static
- Re: [PATCH] scsi: ata: make ahci_sdev_attrs static
- Re: [PATCH] scsi: ata: make ahci_sdev_attrs static
- Re: [PATCH] scsi: ata: make ahci_sdev_attrs static
- [PATCH] scsi: ata: make ahci_sdev_attrs static
- Re: [GIT PULL] libata fixes for 5.15-rc6
- [GIT PULL] libata fixes for 5.15-rc6
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH] IB/cm: Fix possible use-after-free in ib_cm_cleanup()
- Re: [PATCH] ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
- Re: [PATCH] IB/cm: Fix possible use-after-free in ib_cm_cleanup()
- [PATCH] IB/cm: Fix possible use-after-free in ib_cm_cleanup()
- Re: [PATCH] ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
- [PATCH] ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
- [PATCH] ata: replace snprintf in show functions with sysfs_emit
- Re: Questions (and a possible bug) regarding the ata_device_blacklist and ATA_HORKAGE_ZERO_AFTER_TRIM
- Re: [PATCH v2] ata: atp867x: Cleanup pointer value print
- Re: [PATCH] pata_legacy: fix a couple uninitialized variable bugs
- Re: [PATCH v4] Fixes to DMA state check
- Re: [PATCH v4] Fixes to DMA state check
- Re: [PATCH v4] Fixes to DMA state check
- [PATCH v5] Fixes to DMA state check
- [PATCH 6/6] pata_radisys: fix checking of DMA state
- [PATCH 2/6] libata-scsi: fix checking of DMA state
- [PATCH 4/6] pata_amd: fix checking of DMA state
- [PATCH 3/6] pata_ali: fix checking of DMA state
- [PATCH 1/6] libata: fix checking of DMA state
- [PATCH 5/6] pata_optidma: fix checking of DMA state
- Re: [PATCH v4] Fixes to DMA state check
- [PATCH] Add AHCI support for ASM1062+JBM575 cards
- [PATCH v3] Add AHCI support for ASM1062+JBM575 cards
- Re: [PATCH v2] Add AHCI support for ASM1062+JBM575 cards
- [PATCH v2] Add AHCI support for ASM1062+JBM575 cards
- Re: [PATCH] Add AHCI support for ASM1062+JBM575 cards
- Re: [PATCH] Add AHCI support for ASM1062+JBM575 cards
- Re: [PATCH v2] ata: atp867x: Cleanup pointer value print
- Re: [PATCH v3] Add AHCI support for ASM1062+JBM575 cards
- Re: [PATCH] pata_legacy: fix a couple uninitialized variable bugs
- [PATCH] Add AHCI support for ASM1062+JBM575 cards
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH] Add AHCI support for (noname) PCIe sata cards based on ASM1062+JBM575 cards, usually 10 SATA ports or more. DeviceID: 0624 (rev 01)
- Re: Asmedia 0x0624 support in linux kernel - news, test results
- [PATCH] Add AHCI support for (noname) PCIe sata cards based on ASM1062+JBM575 cards, usually 10 SATA ports or more. DeviceID: 0624 (rev 01)
- [PATCH] Add AHCI support for (noname) PCIe sata cards based on ASM1062+JBM575 cards, usually 10 SATA ports or more. DeviceID: 0624 (rev 01)
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: Asmedia 0x0624 support in linux kernel - news, test results
- Re: Asmedia 0x0624 support in linux kernel - news, test results
- [PATCH] pata_legacy: fix a couple uninitialized variable bugs
- Re: Asmedia 0x0624 support in linux kernel - request - update with manually built kernel
- Re: Asmedia 0x0624 support in linux kernel - request - update with manually built kernel
- Asmedia 0x0624 support in linux kernel - request - txt format
- [PATCH 3/6] pata_ali: fix checking of DMA state
- [PATCH 6/6] pata_radisys: fix checking of DMA state
- [PATCH 2/6] libata-scsi: fix checking of DMA state
- [PATCH v4] Fixes to DMA state check
- [PATCH 4/6] pata_amd: fix checking of DMA state
- [PATCH 5/6] pata_optidma: fix checking of DMA state
- [PATCH 1/6] libata: fix checking of DMA state
- Re: [PATCH] drivers/ata: Fix kernel pointer leak
- Re: [PATCH] drivers/ata: Fix kernel pointer leak
- Re: [PATCH] drivers/ata: Fix kernel pointer leak
- [PATCH v2] ata: atp867x: Cleanup pointer value print
- Re: [PATCH] drivers/ata: Fix kernel pointer leak
- Re: [PATCH] drivers/ata: Fix kernel pointer leak
- Re: [PATCH] drivers/ata: Fix kernel pointer leak
- Re: [PATCH] drivers/ata: Fix kernel pointer leak
- [PATCH] drivers/ata: Fix kernel pointer leak
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: [PATCH] libata: fix checking of DMA state
- Re: [PATCH] libata: fix checking of DMA state
- Re: [PATCH] libata: fix checking of DMA state
- Re: [PATCH v2] ahci: remove duplicated PCI device IDs
- Re: [PATCH 4/4] pata_imx: deny IRQ0
- Re: [PATCH 4/4] pata_imx: deny IRQ0
- Re: [PATCH 4/4] pata_imx: deny IRQ0
- Re: [PATCH 4/4] pata_imx: deny IRQ0
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v2] ahci: remove duplicated PCI device IDs
- [PATCH v2] ahci: remove duplicated PCI device IDs
- From: Krzysztof Kozlowski
- Re: [PATCH 4/4] pata_imx: deny IRQ0
- Re: [PATCH] ahci: remove duplicated PCI device IDs
- From: Krzysztof Kozlowski
- Re: [PATCH] ahci: remove duplicated PCI device IDs
- [PATCH] ahci: remove duplicated PCI device IDs
- From: Krzysztof Kozlowski
- Re: Questions (and a possible bug) regarding the ata_device_blacklist and ATA_HORKAGE_ZERO_AFTER_TRIM
- Re: (subset) [PATCH 2/2] ARM: dts: exynos: drop undocumented samsung,sata-freq property in Exynos5250
- From: Krzysztof Kozlowski
- Re: [PATCH v8 0/5] Initial support for multi-actuator HDDs
- Re: [GIT PULL] libata maintainers update
- [GIT PULL] libata maintainers update
- [PATCH AUTOSEL 4.19 31/74] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- [PATCH AUTOSEL 4.9 26/48] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- [PATCH AUTOSEL 4.14 28/59] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- [PATCH AUTOSEL 5.4 041/109] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- [PATCH AUTOSEL 5.10 060/176] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- [PATCH AUTOSEL 5.13 074/219] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- [PATCH AUTOSEL 5.14 087/252] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- Re: [PATCH v8 2/5] scsi: sd: add concurrent positioning ranges support
- Re: [PATCH v8 1/5] block: Add independent access ranges support
- [PATCH v8 5/5] doc: Fix typo in request queue sysfs documentation
- [PATCH v8 4/5] doc: document sysfs queue/independent_access_ranges attributes
- [PATCH v8 3/5] libata: support concurrent positioning ranges log
- [PATCH v8 2/5] scsi: sd: add concurrent positioning ranges support
- [PATCH v8 1/5] block: Add independent access ranges support
- [PATCH v8 0/5] Initial support for multi-actuator HDDs
- [PATCH] pata_legacy: Remove redundant initialization of variable timing
- Re: [PATCH] libata: pass over maintainership to Damien Le Moal
- Re: [PATCH] libata: pass over maintainership to Damien Le Moal
- Re: [PATCH] libata: pass over maintainership to Damien Le Moal
- Re: [PATCH] libata: pass over maintainership to Damien Le Moal
- Re: [PATCH] libata: pass over maintainership to Damien Le Moal
- [PATCH] libata: pass over maintainership to Damien Le Moal
- Re: [PATCH v7 1/5] block: Add independent access ranges support
- Re: [PATCH v7 1/5] block: Add independent access ranges support
- Re: [GIT PULL] libata fixes for 5.15-rc1
- Re: [PATCH v7 5/5] doc: Fix typo in request queue sysfs documentation
- Re: [PATCH v7 4/5] doc: document sysfs queue/independent_access_ranges attributes
- Re: [PATCH v7 2/5] scsi: sd: add concurrent positioning ranges support
- Re: [PATCH v7 1/5] block: Add independent access ranges support
- [PATCH v7 3/5] libata: support concurrent positioning ranges log
- [PATCH v7 4/5] doc: document sysfs queue/independent_access_ranges attributes
- [PATCH v7 5/5] doc: Fix typo in request queue sysfs documentation
- [PATCH v7 2/5] scsi: sd: add concurrent positioning ranges support
- [PATCH v7 1/5] block: Add independent access ranges support
- [PATCH v7 0/5] Initial support for multi-actuator HDDs
- [PATCH AUTOSEL 4.4 5/9] libata: fix ata_host_start()
- [PATCH AUTOSEL 4.9 08/14] libata: fix ata_host_start()
- [PATCH AUTOSEL 4.14 11/17] libata: fix ata_host_start()
- [PATCH AUTOSEL 4.19 16/23] libata: fix ata_host_start()
- [PATCH AUTOSEL 5.4 21/30] libata: fix ata_host_start()
- [PATCH AUTOSEL 5.10 26/39] libata: fix ata_host_start()
- [PATCH AUTOSEL 5.13 27/46] libata: fix ata_host_start()
- [PATCH AUTOSEL 5.14 27/47] libata: fix ata_host_start()
- [GIT PULL] libata fixes for 5.15-rc1
- Re: [PATCH 0/4] Explicitly deny IRQ0 in the libata drivers
- Re: [PATCH 0/4] Explicitly deny IRQ0 in the libata drivers
- Re: [PATCH 0/4] Explicitly deny IRQ0 in the libata drivers
- Re: [PATCH v6] libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.
- Re: [PATCH v6] libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.
- Re: [PATCH v6] libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.
- Re: [PATCH v6] libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.
- Re: [PATCH v6] libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.
- [PATCH v6] libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- [PATCH v5] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- [PATCH v4] libata: Add ATA_HORKAGE_NO_NCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v3 0/1] libata: Add ATA_HORKAGE_NONCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [GIT PULL] libata changes for 5.15-rc1
- Re: [PATCH v3 1/1] libata: Add ATA_HORKAGE_NONCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v3 0/1] libata: Add ATA_HORKAGE_NONCQ_ON_AMD for Samsung 860 and 870 SSD.
- Re: [PATCH v3 1/1] libata: Add ATA_HORKAGE_NONCQ_ON_AMD for Samsung 860 and 870 SSD.
- [PATCH v3 1/1] libata: Add ATA_HORKAGE_NONCQ_ON_AMD for Samsung 860 and 870 SSD.
- [PATCH v3 0/1] libata: Add ATA_HORKAGE_NONCQ_ON_AMD for Samsung 860 and 870 SSD.
- [GIT PULL] libata changes for 5.15-rc1
- SATA SSD inaccessible, fails on initial end-of-drive read command
- Re: [PATCH v2 1/1] libata: libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
- Re: [PATCH v2 1/1] libata: libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
- Re: [PATCH v2 1/1] libata: libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
- [PATCH v2 1/1] libata: libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
- [PATCH v2 0/1] libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
- [PATCH] ATA:libata-pmp: fix warn: missing error code
- Re: [PATCH linux-next] include:libata: fix boolreturn.cocci warnings
- [PATCH linux-next] include:libata: fix boolreturn.cocci warnings
- Re: [PATCH] libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
- Re: [PATCH] libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
- [PATCH] libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
- [PATCH] libata: fix checking of DMA state
- [PATCH] libata: fix checking of DMA state
- Re: [PATCH] libata: fix setting and checking of DMA state.
- Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
- Re: [PATCH v7 00/11] libata cleanups and improvements
- Re: [PATCH v7 00/11] libata cleanups and improvements
- Failed disk initialization logged as warning `ata3.00: disabled` instead with more severe log level
- Re: [PATCH v7 00/11] libata cleanups and improvements
- [PATCH v2 24/63] sata_fsl: Use struct_group() for memcpy() region
- Re: [PATCH 1/2] dt-bindings: ata: drop unused Exynos SATA bindings
- Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
- [PATCH] libata: fix setting and checking of DMA state.
- Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
- Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
- Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
- [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
- Re: [PATCH v7 01/11] libata: fix ata_host_alloc_pinfo()
- Re: [PATCH v7 01/11] libata: fix ata_host_alloc_pinfo()
- Re: [PATCH v7 11/11] docs: sysfs-block-device: document ncq_prio_supported
- Re: [PATCH v7 10/11] docs: sysfs-block-device: improve ncq_prio_enable documentation
- Re: [PATCH v7 09/11] libata: Introduce ncq_prio_supported sysfs sttribute
- Re: [PATCH v7 01/11] libata: fix ata_host_alloc_pinfo()
- [PATCH v7 11/11] docs: sysfs-block-device: document ncq_prio_supported
- [PATCH v7 10/11] docs: sysfs-block-device: improve ncq_prio_enable documentation
- [PATCH v7 09/11] libata: Introduce ncq_prio_supported sysfs sttribute
- [PATCH v7 08/11] libata: print feature list on device scan
- [PATCH v7 07/11] libata: fix ata_read_log_page() warning
- [PATCH v7 06/11] libata: cleanup NCQ priority handling
- [PATCH v7 05/11] libata: cleanup ata_dev_configure()
- [PATCH v7 04/11] libata: cleanup device sleep capability detection
- [PATCH v7 03/11] libata: simplify ata_scsi_rbuf_fill()
- [PATCH v7 02/11] libata: fix ata_host_start()
- [PATCH v7 01/11] libata: fix ata_host_alloc_pinfo()
- [PATCH v7 00/11] libata cleanups and improvements
- Re: [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
- Re: [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG
- [PATCH] libata: Disable ATA_CMD_READ_LOG_DMA_EXT in problematic cases.
- Re: [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG
- [PATCH] libata: add kernel parameter to force ATA_HORKAGE_NO_DMA_LOG
- Re: [PATCH v5 9/9] libahci: Introduce ncq_prio_supported sysfs sttribute
- [PATCH v6 9/9] libata: Introduce ncq_prio_supported sysfs sttribute
- [PATCH v6 8/9] libata: print feature list on device scan
- [PATCH v6 7/9] libata: fix ata_read_log_page() warning
- [PATCH v6 6/9] libata: cleanup NCQ priority handling
- [PATCH v6 5/9] libata: cleanup ata_dev_configure()
- [PATCH v6 4/9] libata: cleanup device sleep capability detection
- [PATCH v6 3/9] libata: simplify ata_scsi_rbuf_fill()
- [PATCH v6 2/9] libata: fix ata_host_start()
- [PATCH v6 1/9] libata: fix ata_host_alloc_pinfo()
- [PATCH v6 0/9] libata cleanups and improvements
- Re: [PATCH v5 9/9] libahci: Introduce ncq_prio_supported sysfs sttribute
- Re: [PATCH v5 9/9] libahci: Introduce ncq_prio_supported sysfs sttribute
- [PATCH 2/2] ARM: dts: exynos: drop undocumented samsung,sata-freq property in Exynos5250
- From: Krzysztof Kozlowski
- [PATCH 1/2] dt-bindings: ata: drop unused Exynos SATA bindings
- From: Krzysztof Kozlowski
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
- Re: [PATCH v3 3/4] libata: support concurrent positioning ranges log
- Re: [PATCH v3 2/4] scsi: sd: add concurrent positioning ranges support
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH v5 1/9] libata: fix ata_host_alloc_pinfo()
- [PATCH v5 9/9] libahci: Introduce ncq_prio_supported sysfs sttribute
- [PATCH v5 8/9] libata: print feature list on device scan
- [PATCH v5 7/9] libata: fix ata_read_log_page() warning
- [PATCH v5 6/9] libata: cleanup NCQ priority handling
- [PATCH v5 5/9] libata: cleanup ata_dev_configure()
- [PATCH v5 4/9] libata: cleanup device sleep capability detection
- [PATCH v5 3/9] libata: simplify ata_scsi_rbuf_fill()
- [PATCH v5 2/9] libata: fix ata_host_start()
- [PATCH v5 1/9] libata: fix ata_host_alloc_pinfo()
- [PATCH v5 0/9] libata cleanups and improvements
- Re: [PATCH v4 10/10] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- Re: [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
- Re: [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute
- Re: [PATCH v4 03/10] libata: fix sparse warning
- Re: [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
- [PATCH v4 10/10] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute
- [PATCH v4 08/10] libata: print feature list on device scan
- [PATCH v4 07/10] libata: fix ata_read_log_page() warning
- [PATCH v4 06/10] libata: cleanup NCQ priority handling
- [PATCH v4 05/10] libata: cleanup ata_dev_configure()
- [PATCH v4 04/10] libata: cleanup device sleep capability detection
- [PATCH v4 03/10] libata: fix sparse warning
- [PATCH v4 02/10] libata: fix ata_host_start()
- [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
- [PATCH v4 00/10] libata cleanups and improvements
- Re: [PATCH v2 2/9] libata: fix ata_host_start()
- Re: [PATCH v2 2/9] libata: fix ata_host_start()
- Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
- Re: [PATCH v2 2/9] libata: fix ata_host_start()
- Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
- Re: [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
- Re: [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
- Re: [PATCH v3 4/9] libata: cleanup ata_dev_configure()
- [PATCH v3 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
- [PATCH v3 7/9] libata: print feature list on device scan
- [PATCH v3 6/9] libata: fix ata_read_log_page() warning
- [PATCH v3 5/9] libata: cleanup NCQ priority handling
- [PATCH v3 4/9] libata: cleanup ata_dev_configure()
- [PATCH v3 3/9] libata: cleanup device sleep capability detection
- [PATCH v3 2/9] libata: fix ata_host_start()
- [PATCH v3 1/9] libata: fix ata_host_alloc_pinfo()
- [PATCH v3 0/9] libata cleanups and improvements
- Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
- Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
- Re: [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- Re: [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
- Re: [PATCH v2 7/9] libata: print feature list on device scan
- Re: [PATCH v2 6/9] libata: fix ata_read_log_page() warning
- Re: [PATCH v2 5/9] libata: cleanup NCQ priority handling
- Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
- Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
- Re: [PATCH v2 3/9] libata: cleanup device sleep capability detection
- Re: [PATCH v2 2/9] libata: fix ata_host_start()
- Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
- Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
- [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- [PATCH v2 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
- [PATCH v2 7/9] libata: print feature list on device scan
- [PATCH v2 6/9] libata: fix ata_read_log_page() warning
- [PATCH v2 5/9] libata: cleanup NCQ priority handling
- [PATCH v2 4/9] libata: cleanup ata_dev_configure()
- [PATCH v2 3/9] libata: cleanup device sleep capability detection
- [PATCH v2 2/9] libata: fix ata_host_start()
- [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
- [PATCH v2 0/9] libata cleanups and improvements
- Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
- Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
- Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
- Re: [PATCH] libata: fix ata_pio_sector for CONFIG_HIGHMEM
- [GIT PULL] IXP4xx driver updates for v5.15
- Re: [PATCH 1/5 v2] pata: ixp4xx: Use local dev variable
- [PATCH AUTOSEL 5.13 01/11] libata: fix ata_pio_sector for CONFIG_HIGHMEM
- [PATCH AUTOSEL 4.14 1/5] libata: fix ata_pio_sector for CONFIG_HIGHMEM
- [PATCH AUTOSEL 4.19 1/5] libata: fix ata_pio_sector for CONFIG_HIGHMEM
- [PATCH AUTOSEL 5.4 1/6] libata: fix ata_pio_sector for CONFIG_HIGHMEM
- [PATCH AUTOSEL 5.10 1/9] libata: fix ata_pio_sector for CONFIG_HIGHMEM
- Re: [PATCH 2/7] libata: cleanup ata_dev_configure()
- Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- Re: [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings
- Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- Re: [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings
- [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
- [PATCH 6/7] libahci: Introduce ncq_prio_supported sysfs sttribute
- [PATCH 5/7] libata: print feature list on device scan
- [PATCH 3/7] libata: cleanup NCQ priority handling
- [PATCH 4/7] libata: fix ata_read_log_page() warning
- [PATCH 1/7] libata: cleanup device sleep capability detection
- [PATCH 2/7] libata: cleanup ata_dev_configure()
- [PATCH 0/7] libata cleanups and improvements
- [PATCH 5/5 v2] pata: ixp4xx: Rewrite to use device tree
- [PATCH 4/5 v2] pata: ixp4xx: Add DT bindings
- [PATCH 3/5 v2] pata: ixp4xx: Refer to cmd and ctl rather than csN
- [PATCH 2/5 v2] pata: ixp4xx: Use IS_ENABLED() to determine endianness
- [PATCH 1/5 v2] pata: ixp4xx: Use local dev variable
- Re: [GIT PULL] libata updates for 5.14-rc
- [GIT PULL] libata updates for 5.14-rc
- Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
- Re: [PATCH 4/5] pata: ixp4xx: Add DT bindings
- [PATCH 5/5] pata: ixp4xx: Rewrite to use device tree
- [PATCH 4/5] pata: ixp4xx: Add DT bindings
- [PATCH 3/5] pata: ixp4xx: Refer to cmd and ctl rather than csN
- [PATCH 2/5] pata: ixp4xx: Use IS_ENABLED() to determine endianness
- [PATCH 1/5] pata: ixp4xx: Use local dev variable
- [PATCH 0/5] Update and rewrite IXP4xx PATA driver
- Re: [PATCH v1 1/1] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- [PATCH v1 1/1] ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
- Re: [PATCH v3 3/4] libata: support concurrent positioning ranges log
- Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
- [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
- [PATCH v3 3/4] libata: support concurrent positioning ranges log
- [PATCH v3 2/4] scsi: sd: add concurrent positioning ranges support
- [PATCH v3 1/4] block: Add concurrent positioning ranges support
- [PATCH v3 0/4] Initial support for multi-actuator HDDs
- Re: [PATCH v2 1/4] block: Add concurrent positioning ranges support
- [PATCH v2 4/4] doc: document sysfs queue/cranges attributes
- [PATCH v2 3/4] libata: support concurrent positioning ranges log
- [PATCH v2 2/4] scsi: sd: add concurrent positioning ranges support
- [PATCH v2 1/4] block: Add concurrent positioning ranges support
- [PATCH v2 0/4] Initial support for multi-actuator HDDs
- Re: [PATCH 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH 3/4] libata: support concurrent positioning ranges log
- Re: [PATCH 2/4] scsi: sd: add concurrent positioning ranges support
- Re: [PATCH 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH 3/4] libata: support concurrent positioning ranges log
- Re: [PATCH 2/4] scsi: sd: add concurrent positioning ranges support
- Re: [PATCH 1/4] block: Add concurrent positioning ranges support
- Re: [PATCH 0/4] Initial support for multi-actuator HDDs
- Re: [PATCH 2/4] scsi: sd: add concurrent positioning ranges support
- [PATCH 3/4] libata: support concurrent positioning ranges log
- [PATCH 4/4] doc: document sysfs queue/cranges attributes
- [PATCH 2/4] scsi: sd: add concurrent positioning ranges support
- [PATCH 1/4] block: Add concurrent positioning ranges support
- [PATCH 0/4] Initial support for multi-actuator HDDs
- [Bug 213157] BUG: unable to handle page fault for address: fffbb000, Workqueue: ata_sff ata_sff_pio_task
- [Bug 213157] BUG: unable to handle page fault for address: fffbb000, Workqueue: ata_sff ata_sff_pio_task
- Re: [PATCH] libata: fix ata_pio_sector for CONFIG_HIGHMEM
- [PATCH] libata: fix ata_pio_sector for CONFIG_HIGHMEM
- [PATCH] drivers: ata: Replace DPRINTK with pr_debug and add __func__ in pr_debug
- From: Abd-Alrhman Masalkhi
- Re: [GIT PULL] libata changes for 5.14-rc1
- Re: [PATCH 5/6] FMS: Add the SCSI Get Configuration command.
- [GIT PULL] libata changes for 5.14-rc1
- Re: [PATCH 5/6] FMS: Add the SCSI Get Configuration command.
- Re: [PATCH 5/6] FMS: Add the SCSI Get Configuration command.
- [PATCH 5/6] FMS: Add the SCSI Get Configuration command.
- Re: [PATCH] ata: rb532_cf: remove redundant codes
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- [PATCH] ata: rb532_cf: remove redundant codes
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: remove the legacy ide driver v2
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] ahci: Add support for Dell S140 and later controllers
- Re: [PATCH 00/11] Rid W=1 warnings from ATA
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support
- Re: [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: remove the legacy ide driver v2
- Re: [PATCH 1/6] pata_cypress: add a module option to disable BM-DMA
- From: Russell King (Oracle)
- Re: [PATCH 5/6] m68k: use libata instead of the legacy ide driver
- Re: [PATCH 5/6] m68k: use libata instead of the legacy ide driver
- Re: [PATCH 00/21] Rid W=1 warnings from IDE
- Re: remove the legacy ide driver v2
- Re: remove the legacy ide driver v2
- From: John Paul Adrian Glaubitz
- [PATCH 5/6] m68k: use libata instead of the legacy ide driver
- [PATCH 4/6] ARM: disable CONFIG_IDE in pxa_defconfig
- [PATCH 3/6] ARM: disable CONFIG_IDE in footbridge_defconfig
- [PATCH 2/6] alpha: use libata instead of the legacy ide driver
- [PATCH 1/6] pata_cypress: add a module option to disable BM-DMA
- remove the legacy ide driver v2
- Re: [PATCH 00/11] Rid W=1 warnings from ATA
- Re: [PATCH 00/11] Rid W=1 warnings from ATA
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
- Re: [PATCH -next] ide-cd: fix warning: variable 'stat' set but not used
- Re: [PATCH -next] ide-cd: fix warning: variable 'stat' set but not used
- Re: [PATCH] ahci: Add support for Dell S140 and later controllers
- [PATCH] dt-bindings: Drop redundant minItems/maxItems
- [PATCH] ahci: Add support for Dell S140 and later controllers
- Re: [PATCH -next] ide-cd: fix warning: variable 'stat' set but not used
- Re: [PATCH v2 RESEND] ata: ahci_sunxi: Disable DIPM
- Re: [PATCH 00/21] Rid W=1 warnings from IDE
- [PATCH v2 RESEND] ata: ahci_sunxi: Disable DIPM
- Re: libata: big endian bug in VPD page 89 (ATA Information)
- libata: big endian bug in VPD page 89 (ATA Information)
- Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH v3 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- [PATCH] ide/falconide: Avoid build failure when CONFIG_ATARI=n
- Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH v3 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH v3 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- ide: ali14xx: intent to convert driver
- [PATCH v2 1/2] m68k: io_mm.h - add APNE 100 MBit support
- [PATCH v2 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
- [PATCH v2 0/2] Add APNE PCMCIA 100 Mbit support
- [PATCH v3] m68k: io_mm.h: conditionalize ISA address translation on Atari
- [PATCH v3 2/2] m68k/q40: Replace q40ide driver with pata_falcon and falconide
- [PATCH v3 1/2] m68k/mac: Replace macide driver with generic platform drivers
- [PATCH v3 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari
- Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari
- [PATCH v1 1/2] m68k: io_mm.h - add APNE 100 MBit support
- [PATCH v1 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver
- [PATCH v1 0/2] Add APNE PCMCIA 100 Mbit support
- [PATCH v2] m68k: io_mm.h: conditionalize ISA address translation on Atari
- Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
- Re: [PATCH RFC 1/2] m68k: io_mm.h: conditionalize ISA address translation on Atari
- Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH v2 2/2] m68k/q40: Replace q40ide driver with pata_falcon and falconide
- Re: [PATCH v2 1/2] m68k/mac: Replace macide driver with generic platform drivers
- Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
- Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH v2 0/2] Use libata platform drivers to replace deprecated m68k IDE drivers
- Re: [PATCH RFC 1/2] m68k: io_mm.h - add APNE 100 MBit support
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]