The driver's prereset() method still doesn't check the channel enable bits.
The bug was there for the entire time the driver has existed. :-/
Signed-off-by: Sergey Shtylyov <s.shtylyov@xxxxxx>
---
This patch is against the 'master' branch of Damien Le Moal's 'libata.git'
repo.
Changes in version 2:
- updated #define DRV_VERSION;
- fixed typo in the patch description.
drivers/ata/pata_hpt3x2n.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
Index: libata/drivers/ata/pata_hpt3x2n.c
===================================================================
--- libata.orig/drivers/ata/pata_hpt3x2n.c
+++ libata/drivers/ata/pata_hpt3x2n.c
@@ -24,7 +24,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.15"
+#define DRV_VERSION "0.3.16"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -168,6 +168,13 @@ static int hpt3x2n_pre_reset(struct ata_
{
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ static const struct pci_bits hpt3x2n_enable_bits[] = {
+ { 0x50, 1, 0x04, 0x04 },
+ { 0x54, 1, 0x04, 0x04 }
+ };
+
+ if (!pci_test_config_bits(pdev, &hpt3x2n_enable_bits[ap->port_no]))
+ return -ENOENT;
/* Reset the state machine */
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
