Signed-off-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
---
drivers/ata/ahci_brcm.c | 2 +-
drivers/ata/libata-sata.c | 2 +-
include/linux/libata.h | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 6e9c5ade4c2ea..649815c196ed0 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -333,7 +333,7 @@ static struct ata_port_operations ahci_brcm_platform_ops = {
static const struct ata_port_info ahci_brcm_port_info = {
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
- .link_flags = ATA_LFLAG_NO_DB_DELAY,
+ .link_flags = ATA_LFLAG_NO_DEBOUNCE_DELAY,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_brcm_platform_ops,
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index b9c77885b8726..67b2e7cf3cc4e 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -317,7 +317,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
* immediately after resuming. Delay 200ms before
* debouncing.
*/
- if (!(link->flags & ATA_LFLAG_NO_DB_DELAY))
+ if (!(link->flags & ATA_LFLAG_NO_DEBOUNCE_DELAY))
ata_msleep(link->ap, 200);
/* is SControl restored correctly? */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 2a8404b26083c..15802e644962d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -191,7 +191,7 @@ enum {
ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */
ATA_LFLAG_RST_ONCE = (1 << 9), /* limit recovery to one reset */
ATA_LFLAG_CHANGED = (1 << 10), /* LPM state changed on this link */
- ATA_LFLAG_NO_DB_DELAY = (1 << 11), /* no debounce delay on link resume */
+ ATA_LFLAG_NO_DEBOUNCE_DELAY = (1 << 11), /* no debounce delay on link resume */
/* struct ata_port flags */
ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */