Re: [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly

[Damien Le Moal <Damien.LeMoal@xxxxxxx>]

Resending my reply as the server mx5.huawei.com bounces back to me all my
emails from @opensource.wdc.com... (error 554, but SPF record is correct !)


On Tue, 2022-01-04 at 21:17 -0500, Wenchao Hao wrote:
> This is just a clean code. Since each branch of "if" state would check
> scmd->cmd_len, so move the check of scmd->cmd_len out of "if" state to
> simplify the logic of input parameters check.
> 
> The patch do not change origin function logic.
> 
> Signed-off-by: Wenchao Hao <haowenchao@xxxxxxxxxx>
> ---
>  drivers/ata/libata-scsi.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index 313e9475507b..1c653b5327db 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -4020,19 +4020,18 @@ void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd)
>  int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev)
>  {
>  	u8 scsi_op = scmd->cmnd[0];
> -	ata_xlat_func_t xlat_func;
> +	ata_xlat_func_t xlat_func = NULL;

Not needed. xlat_func is always set for the non-error cases.

>  	int rc = 0;
>  
> +	if (unlikely(!scmd->cmd_len))
> +		goto bad_cdb_len;
> +
>  	if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
> -		if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
> +		if (unlikely(scmd->cmd_len > dev->cdb_len))
>  			goto bad_cdb_len;
>  
>  		xlat_func = ata_get_xlat_func(dev, scsi_op);
>  	} else {
> -		if (unlikely(!scmd->cmd_len))
> -			goto bad_cdb_len;
> -
> -		xlat_func = NULL;
>  		if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
>  			/* relay SCSI command to ATAPI device */
>  			int len = COMMAND_SIZE(scsi_op);

I would go further and cleanup the if else { if else } sequence too.
Something like this:

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a16ef0030667..ed8be585a98f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3958,42 +3958,39 @@ int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
struct ata_device *dev)
 {
 	u8 scsi_op = scmd->cmnd[0];
 	ata_xlat_func_t xlat_func;
-	int rc = 0;
+
+	if (unlikely(!scmd->cmd_len))
+		goto bad_cdb_len;

 	if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
-		if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
+		if (unlikely(scmd->cmd_len > dev->cdb_len))
 			goto bad_cdb_len;

 		xlat_func = ata_get_xlat_func(dev, scsi_op);
-	} else {
-		if (unlikely(!scmd->cmd_len))
-			goto bad_cdb_len;
+	} else if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
+		/* relay SCSI command to ATAPI device */
+		int len = COMMAND_SIZE(scsi_op);

-		xlat_func = NULL;
-		if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
-			/* relay SCSI command to ATAPI device */
-			int len = COMMAND_SIZE(scsi_op);
-			if (unlikely(len > scmd->cmd_len ||
-				     len > dev->cdb_len ||
-				     scmd->cmd_len > ATAPI_CDB_LEN))
-				goto bad_cdb_len;
+		if (unlikely(len > scmd->cmd_len ||
+			     len > dev->cdb_len ||
+			     scmd->cmd_len > ATAPI_CDB_LEN))
+			goto bad_cdb_len;

-			xlat_func = atapi_xlat;
-		} else {
-			/* ATA_16 passthru, treat as an ATA command */
-			if (unlikely(scmd->cmd_len > 16))
-				goto bad_cdb_len;
+		xlat_func = atapi_xlat;
+	} else {
+		/* ATA_16 passthru, treat as an ATA command */
+		if (unlikely(scmd->cmd_len > 16))
+			goto bad_cdb_len;

-			xlat_func = ata_get_xlat_func(dev, scsi_op);
-		}
+		xlat_func = ata_get_xlat_func(dev, scsi_op);
 	}

 	if (xlat_func)
-		rc = ata_scsi_translate(dev, scmd, xlat_func);
-	else
-		ata_scsi_simulate(dev, scmd);
+		return ata_scsi_translate(dev, scmd, xlat_func);

-	return rc;
+	ata_scsi_simulate(dev, scmd);
+
+	return 0;

  bad_cdb_len:
 	scmd->result = DID_ERROR << 16;

Also please change the patch title prefix to: "ata: libata-scsi: ...."

-- 
Damien Le Moal
Western Digital Research