Linux IDE Archive
[Prev Page][Next Page]
- Re: sata_link_debounce: Delays boot by 100 ms, hard coded as minimal debounce duration
- sata_link_debounce: Delays boot by 100 ms, hard coded as minimal debounce duration
- Re: Re: [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- Re: [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- Re: [PATCH v3] ata: libata-scsi: simplify __ata_scsi_queuecmd()
- Re: [PATCH v5] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v5] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: Re: [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- Re: [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- Re: Re: [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- Re: [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- Re: ata: For what PHY was debounce delay introduced? (was: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`)
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- Re: [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- [PATCH v3] ide: Check for null pointer after calling devm_ioremap
- Re: Re: [PATCH v2] ide: Check for null pointer after calling devm_ioremap
- RE: [PATCH v2] ide: Check for null pointer after calling devm_ioremap
- [PATCH v2] ide: Check for null pointer after calling devm_ioremap
- Re: [PATCH v2] ide: Check for null pointer after calling devm_ioremap
- [PATCH v2] ide: Check for null pointer after calling devm_ioremap
- Re: [PATCH] ide: Check for null pointer after calling devm_ioremap
- Re: Re: [PATCH] ide: Check for null pointer after calling devm_ioremap
- Re: [PATCH] ide: Check for null pointer after calling devm_ioremap
- [PATCH] ide: Check for null pointer after calling devm_ioremap
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [PATCH v4 1/2] ahci: Rename flag `ATA_LFLAG_NO_DB_DELAY` to `ATA_LFLAG_NO_DEBOUNCE_DELAY`
- Re: [PATCH v4 1/2] ahci: Rename flag `ATA_LFLAG_NO_DB_DELAY` to `ATA_LFLAG_NO_DEBOUNCE_DELAY`
- Re: [PATCH v4 1/2] ahci: Rename flag `ATA_LFLAG_NO_DB_DELAY` to `ATA_LFLAG_NO_DEBOUNCE_DELAY`
- Re: [PATCH v2 13/22] ata: pata_cs5535: add compile test support
- Re: [PATCH v4 1/2] ahci: Rename flag `ATA_LFLAG_NO_DB_DELAY` to `ATA_LFLAG_NO_DEBOUNCE_DELAY`
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- [PATCH v5] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [PATCH v3 01/15] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
- [PATCH v4 2/2] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- [PATCH v4 1/2] ahci: Rename flag `ATA_LFLAG_NO_DB_DELAY` to `ATA_LFLAG_NO_DEBOUNCE_DELAY`
- [PATCH v3] ata: libata-scsi: simplify __ata_scsi_queuecmd()
- Re: [PATCH v4] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v2] ata: libata-scsi: Make __ata_scsi_queuecmd() parameters check more clearly
- Re: [PATCH v2] ata: libata-scsi: Make __ata_scsi_queuecmd() parameters check more clearly
- Re: [RFC PATCH] libata: sysfs naming option
- Re: [RFC PATCH] libata: sysfs naming option
- Re: [PATCH v2] ata: libata-scsi: Make __ata_scsi_queuecmd() parameters check more clearly
- Re: [PATCH v3 22/22] ata: fix read_id() ata port operation interface
- [PATCH v2] ata: libata-scsi: Make __ata_scsi_queuecmd() parameters check more clearly
- Re: [RFC PATCH] libata: sysfs naming option
- Re: [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly
- Re: [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly
- Re: [PATCH] drivers/ata: remove redundant val variable
- [PATCH v3 20/22] ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions
- [PATCH v3 22/22] ata: fix read_id() ata port operation interface
- [PATCH v3 21/22] ata: ahci_xgene: use correct type for port mmio address
- [PATCH v3 18/22] ata: pata_samsung_cf: add compile test support
- [PATCH v3 17/22] ata: pata_legacy: add compile test support
- [PATCH v3 19/22] ata: sata_fsl: fix scsi host initialization
- [PATCH v3 16/22] ata: pata_pxa: add compile test support
- [PATCH v3 15/22] ata: pata_imx: add compile test support
- [PATCH v3 14/22] ata: pata_ftide010: add compile test support
- [PATCH v3 13/22] ata: pata_cs5535: add compile test support
- [PATCH v3 12/22] ata: pata_bk3710: add compile test support
- [PATCH v3 11/22] ata: ahci_seattle: add compile test support
- [PATCH v3 09/22] ata: ahci_tegra: add compile test support
- [PATCH v3 10/22] ata: ahci_xgene: add compile test support
- [PATCH v3 08/22] ata: ahci_sunxi: add compile test support
- [PATCH v3 07/22] ata: ahci_mvebu: add compile test support
- [PATCH v3 06/22] ata: ahci_mtk: add compile test support
- [PATCH v3 05/22] ata: ahci_st: add compile test support
- [PATCH v3 04/22] ata: ahci_dm816: add compile test support
- [PATCH v3 03/22] ata: ahci_da850: add compile test support
- [PATCH v3 02/22] ata: ahci_brcm: add compile test support
- [PATCH v3 01/22] ata: sata_fsl: add compile test support
- [PATCH v3 00/22] Improve compile test coverage
- Re: [PATCH v2 22/22] ata: ahci_xgene: Fix id array access in xgene_ahci_read_id()
- Re: [PATCH v2 20/22] ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions
- [PATCH v4] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3 04/10] ata: pata_platform: Use platform_get_irq_optional() to get the interrupt
- [PATCH demo] ata_scsi_queuecmd: Make input parameters check more clearly
- Re: [PATCH v2 22/22] ata: ahci_xgene: Fix id array access in xgene_ahci_read_id()
- Re: [PATCH v2 21/22] ata: ahci_xgene: use correct type for port mmio address
- Re: [PATCH v2 20/22] ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions
- Re: [PATCH v2 19/22] ata: sata_fsl: fix scsi host initialization
- Re: [PATCH v2 18/22] ata: pata_samsung_cf: add compile test support
- Re: [PATCH v2 17/22] ata: pata_legacy: add compile test support
- Re: [PATCH v2 16/22] ata: pata_pxa: add compile test support
- Re: [PATCH v2 15/22] ata: pata_imx: add compile test support
- Re: [PATCH v2 14/22] ata: pata_ftide010: add compile test support
- Re: [PATCH v2 13/22] ata: pata_cs5535: add compile test support
- ata: For what PHY was debounce delay introduced? (was: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`)
- Re: [PATCH v2 12/22] ata: pata_bk3710: add compile test support
- Re: [PATCH v2 11/22] ata: ahci_seattle: add compile test support
- Re: [PATCH v2 10/22] ata: ahci_xgene: add compile test support
- Re: [PATCH v2 09/22] ata: ahci_tegra: add compile test support
- Re: [PATCH v2 08/22] ata: ahci_sunxi: add compile test support
- Re: [PATCH v2 07/22] ata: ahci_mvebu: add compile test support
- Re: [PATCH v2 06/22] ata: ahci_mtk: add compile test support
- Re: [PATCH v2 05/22] ata: ahci_st: add compile test support
- Re: [PATCH v2 04/22] ata: ahci_dm816: add compile test support
- Re: [PATCH v2 03/22] ata: ahci_da850: add compile test support
- Re: [PATCH v2 02/22] ata: ahci_brcm: add compile test support
- Re: [PATCH v2 01/22] ata: sata_fsl: add compile test support
- [PATCH] drivers/ata: remove redundant val variable
- [PATCH v2 22/22] ata: ahci_xgene: Fix id array access in xgene_ahci_read_id()
- [PATCH v2 17/22] ata: pata_legacy: add compile test support
- [PATCH v2 20/22] ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions
- [PATCH v2 21/22] ata: ahci_xgene: use correct type for port mmio address
- [PATCH v2 19/22] ata: sata_fsl: fix scsi host initialization
- [PATCH v2 18/22] ata: pata_samsung_cf: add compile test support
- [PATCH v2 15/22] ata: pata_imx: add compile test support
- [PATCH v2 16/22] ata: pata_pxa: add compile test support
- [PATCH v2 14/22] ata: pata_ftide010: add compile test support
- [PATCH v2 12/22] ata: pata_bk3710: add compile test support
- [PATCH v2 11/22] ata: ahci_seattle: add compile test support
- [PATCH v2 13/22] ata: pata_cs5535: add compile test support
- [PATCH v2 10/22] ata: ahci_xgene: add compile test support
- [PATCH v2 09/22] ata: ahci_tegra: add compile test support
- [PATCH v2 08/22] ata: ahci_sunxi: add compile test support
- [PATCH v2 07/22] ata: ahci_mvebu: add compile test support
- [PATCH v2 06/22] ata: ahci_mtk: add compile test support
- [PATCH v2 05/22] ata: ahci_st: add compile test support
- [PATCH v2 04/22] ata: ahci_dm816: add compile test support
- [PATCH v2 03/22] ata: ahci_da850: add compile test support
- [PATCH v2 02/22] ata: ahci_brcm: add compile test support
- [PATCH v2 01/22] ata: sata_fsl: add compile test support
- [PATCH v2 00/22] Improve compile test coverage
- Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- [PATCH 21/21] ata: ahci_xgene: Fix id array access in xgene_ahci_read_id()
- [PATCH 20/21] ata: ahci_xgene: use correct type for port mmio address
- [PATCH 19/21] ata: sata_fsl: fix scsi host initialization
- [PATCH 18/21] ata: pata_samsung_cf: add compile test support
- [PATCH 17/21] ata: pata_legacy: add compile test support
- [PATCH 16/21] ata: pata_pxa: add compile test support
- [PATCH 15/21] ata: pata_imx: add compile test support
- [PATCH 14/21] ata: pata_ftide010: add compile test support
- [PATCH 13/21] ata: pata_cs5535: add compile test support
- [PATCH 12/21] ata: pata_bk3710: add compile test support
- [PATCH 11/21] ata: ahci_seattle: add compile test support
- [PATCH 10/21] ata: ahci_xgene: add compile test support
- [PATCH 09/21] ata: ahci_tegra: add compile test support
- [PATCH 07/21] ata: ahci_mvebu: add compile test support
- [PATCH 06/21] ata: ahci_mtk: add compile test support
- [PATCH 08/21] ata: ahci_sunxi: add compile test support
- [PATCH 05/21] ata: ahci_st: add compile test support
- [PATCH 04/21] ata: ahci_dm816: add compile test support
- [PATCH 03/21] ata: ahci_da850: add compile test support
- [PATCH 02/21] ata: ahci_brcm: add compile test support
- [PATCH 01/21] ata: sata_fsl: add compile test support
- [PATCH 00/21] Improve compile test coverage
- Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- Re: [RFC PATCH] libata: sysfs naming option
- Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- [PATCH] ata: sata_fsl: add compile test support
- [RFC PATCH] libata: sysfs naming option
- Re: [PATCHv3 00/68] libata: rework logging, take II
- Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- Re: [PATCHv3 00/68] libata: rework logging, take II
- Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- Re: [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
- Re: [PATCH v3 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode
- Re: [PATCHv3 00/68] libata: rework logging, take II
- Re: [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
- Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- Re: [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
- Re: [PATCH 43/68] libata: drop ata_msg_info()
- Re: [PATCHv3 00/68] libata: rework logging, take II
- Re: [PATCH 65/68] libata-scsi: rework ata_dump_status to avoid using pr_cont()
- Re: [PATCH 13/68] libata: revamp ata_get_cmd_descript()
- Re: [PATCH 08/68] libata: tracepoints for bus-master DMA
- Re: [PATCH 03/68] libata: Add ata_port_classify() helper
- Re: [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
- Re: [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- [PATCH v3 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- [PATCH v3 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
- [PATCH v3 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- From: Mauro Carvalho Chehab
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [PATCH 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- From: Mauro Carvalho Chehab
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- From: Mauro Carvalho Chehab
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [PATCH v3 04/10] ata: pata_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- From: Mauro Carvalho Chehab
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- From: Mauro Carvalho Chehab
- Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH v3 09/10] ata: pata_platform: Sort the #includes alphabetically
- Re: [PATCH v3 08/10] ata: pata_platform: Drop validating num_resources count
- Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH v3 06/10] ata: pata_of_platform: Make use of platform_get_mem_or_io()
- Re: [PATCH v3 05/10] ata: pata_platform: Drop checking IRQ number
- Re: [PATCH v3 04/10] ata: pata_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3 03/10] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
- Re: [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- [PATCH v2 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
- [PATCH 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()`
- [PATCH 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE
- Re: [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
- Re: [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
- Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH v3 03/10] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3 03/10] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
- Re: [PATCH v3 01/10] ata: pata_platform: Make use of platform_get_mem_or_io()
- Re: [PATCH v3 01/10] ata: pata_platform: Make use of platform_get_mem_or_io()
- Re: [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
- [PATCH v3 10/10] ata: pata_platform: Make use of GENMASK() macro
- [PATCH v3 09/10] ata: pata_platform: Sort the #includes alphabetically
- [PATCH v3 08/10] ata: pata_platform: Drop validating num_resources count
- [PATCH v3 07/10] ata: pata_platform: Merge pata_of_platform into pata_platform
- [PATCH v3 05/10] ata: pata_platform: Drop checking IRQ number
- [PATCH v3 06/10] ata: pata_of_platform: Make use of platform_get_mem_or_io()
- [PATCH v3 04/10] ata: pata_platform: Use platform_get_irq_optional() to get the interrupt
- [PATCH v3 03/10] ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
- [PATCH v3 02/10] ata: pata_platform: Drop use of unlikely() in pata_platform_probe
- [PATCH v3 01/10] ata: pata_platform: Make use of platform_get_mem_or_io()
- Re: [PATCH v2 2/4] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH v2 2/4] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH 43/68] libata: drop ata_msg_info()
- Re: [PATCH v2 1/4] ata: pata_platform: make use of platform_get_mem_or_io()
- Re: [PATCH 43/68] libata: drop ata_msg_info()
- Re: [PATCH] ata: libahci_platform: Remove abundant check
- Re: [PATCH] ata: libahci_platform: Remove abundant check
- Re: [PATCH] ata: libahci_platform: Remove abundant check
- Re: [PATCH v2 1/4] ata: pata_platform: make use of platform_get_mem_or_io()
- [PATCH] ata: libahci_platform: Remove abundant check
- Re: [PATCH v2 1/4] ata: pata_platform: make use of platform_get_mem_or_io()
- Re: [PATCH v2 4/4] ata: pata_platform: Make use of GENMASK() macro
- Re: [PATCH v2 3/4] ata: pata_platform: Sort the #includes alphabetically
- [PATCH v2 4/4] ata: pata_platform: Make use of GENMASK() macro
- [PATCH v2 3/4] ata: pata_platform: Sort the #includes alphabetically
- [PATCH v2 2/4] ata: pata_platform: Merge pata_of_platform into pata_platform
- [PATCH v2 1/4] ata: pata_platform: make use of platform_get_mem_or_io()
- [PATCH v2 0/4] ata: pata_platform: Refurbish the driver
- [PATCH 67/68] sata_dwc_460ex: remove 'check_status' argument
- [PATCH 63/68] sata_gemini: convert pr_err() calls
- [PATCH 61/68] pata_octeon_cf: Replace pr_XXX() calls with structured logging
- [PATCH 60/68] pata_hpt37x: convert pr_XXX() calls
- [PATCH 65/68] libata-scsi: rework ata_dump_status to avoid using pr_cont()
- [PATCH 58/68] sata_sx4: convert printk() calls
- [PATCH 54/68] pata_marvell: convert printk() calls
- [PATCH 64/68] pata_hpt366: convert pr_warn() calls
- [PATCH 66/68] sata_dwc_460ex: drop DEBUG_NCQ
- [PATCH 52/68] pata_cypress: convert printk() calls
- [PATCH 68/68] sata_dwc_460ex: Remove debug compile options
- [PATCH 62/68] pata_hpt3x2n: convert pr_XXX() calls
- [PATCH 59/68] sata_mv: convert remaining printk() to structured logging
- [PATCH 56/68] pata_serverworks: convert printk() calls
- [PATCH 55/68] pata_rz1000: convert printk() calls
- [PATCH 49/68] pata_cmd64x: convert printk() calls
- [PATCH 48/68] pata_cmd640: convert printk() calls
- [PATCH 47/68] pata_atp867x: convert printk() calls
- [PATCH 50/68] pata_cs5520: convert printk() calls
- [PATCH 41/68] libata: drop ata_msg_warn()
- [PATCH 57/68] pata_sil680: convert printk() calls
- [PATCH 45/68] libata: remove 'new' ata message handling
- [PATCH 42/68] libata: drop ata_msg_probe()
- [PATCH 53/68] pata_it821x: convert printk() calls
- [PATCH 51/68] pata_cs5536: convert printk() calls
- [PATCH 38/68] libata: drop ata_msg_error() and ata_msg_intr()
- [PATCH 35/68] sata_sil: Drop pointless VPRINTK() calls
- [PATCH 32/68] sata_mv: Drop pointless VPRINTK() call and convert the remaining one
- [PATCH 46/68] libata: remove debug compilation switches
- [PATCH 43/68] libata: drop ata_msg_info()
- [PATCH 37/68] sata_sx4: add module parameter 'dimm_test'
- [PATCH 29/68] sata_qstor: Drop pointless VPRINTK() calls
- [PATCH 31/68] sata_inic162x: Drop pointless VPRINTK() calls
- [PATCH 44/68] libata: drop ata_msg_drv()
- [PATCH 36/68] sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 40/68] libata: drop ata_msg_malloc()
- [PATCH 39/68] libata: drop ata_msg_ctl()
- [PATCH 33/68] sata_nv: drop pointless VPRINTK() calls and convert remaining ones
- [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 25/68] pdc_adma: Drop pointless VPRINTK() calls and remove disabled NCQ debugging
- [PATCH 27/68] pata_via: Drop pointless VPRINTK() calls
- [PATCH 34/68] sata_fsl: convert VPRINTK() calls to ata_port_dbg()
- [PATCH 30/68] sata_rcar: Drop pointless VPRINTK() calls
- [PATCH 23/68] libata: remove pointless VPRINTK() calls
- [PATCH 26/68] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining one
- [PATCH 24/68] ahci: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 22/68] pata_pdc2027x: Replace PDPRINTK() with standard ata logging
- [PATCH 12/68] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros
- [PATCH 16/68] sata_mv: replace DPRINTK with dynamic debugging
- [PATCH 15/68] sata_mv: kill 'port' argument in mv_dump_all_regs()
- [PATCH 21/68] sata_qstor: replace DPRINTK() with ata_port_dbg()
- [PATCH 20/68] sata_rcar: replace DPRINTK() with ata_port_dbg()
- [PATCH 09/68] libata-sff: tracepoints for HSM state machine
- [PATCH 14/68] libata: move DPRINTK to ata debugging
- [PATCH 10/68] libata-scsi: drop DPRINTK calls for cdb translation
- [PATCH 13/68] libata: revamp ata_get_cmd_descript()
- [PATCH 17/68] pata_octeon_cf: remove DPRINTK() macro in interrupt context
- [PATCH 19/68] sata_fsl: move DPRINTK to ata debugging
- [PATCH 18/68] pdc_adma: Remove DPRINTK call
- [PATCH 08/68] libata: tracepoints for bus-master DMA
- [PATCH 06/68] libata: add reset tracepoints
- [PATCH 01/68] libata: remove pointless debugging messages
- [PATCH 11/68] libata: add tracepoints for ATA error handling
- [PATCH 05/68] libata: sanitize ATA_HORKAGE_DUMP_ID
- [PATCH 07/68] libata: add qc_prep tracepoint
- [PATCH 03/68] libata: Add ata_port_classify() helper
- [PATCH 04/68] libata: move ata_dump_id() to dynamic debugging
- [PATCH 02/68] libata: whitespace cleanup
- [PATCHv3 00/68] libata: rework logging, take II
- Re: [PATCH] libata: use min() to make code cleaner
- Re: [PATCH v2 1/1] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- [PATCH] libata: use min() to make code cleaner
- Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [GIT PULL] libata fixes for 5.16-rc6
- [GIT PULL] libata fixes for 5.16-rc6
- Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
- Re: [PATCH v4 3/6] ARM: dts: NSP: Rename SATA unit name
- Re: [PATCH v4 6/6] dt-bindings: usb: Convert BDC to YAML
- Re: [PATCH v4 5/6] dt-bindings: bus: Convert GISB arbiter to YAML
- Re: [PATCH v4 4/6] dt-bindings: ata: Convert Broadcom SATA to YAML
- Re: [PATCH v4 1/6] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
- [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
- [PATCH 1/2] ata: pata_platform: make use of platform_get_mem_or_io()
- [PATCH 0/2] ata: pata_platform: Refurbish the driver
- Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
- Re: [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
- [PATCH v2 1/1] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
- [PATCH v4 6/6] dt-bindings: usb: Convert BDC to YAML
- [PATCH v4 5/6] dt-bindings: bus: Convert GISB arbiter to YAML
- [PATCH v4 4/6] dt-bindings: ata: Convert Broadcom SATA to YAML
- [PATCH v4 3/6] ARM: dts: NSP: Rename SATA unit name
- [PATCH v4 2/6] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
- [PATCH v4 1/6] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- [PATCH v4 0/6] Broadcom DT bindings updates to YAML
- Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
- Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
- Re: [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
- Re: [PATCH v2 RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
- Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
- Re: [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
- [PATCH] ata: pata_of_platform: Use of_irq_to_resource() to populate IRQ resource
- Re: [PATCH v2 RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH v3 15/15] dt-bindings: usb: Convert BDC to YAML
- Re: [PATCH v3 14/15] dt-bindings: bus: Convert GISB arbiter to YAML
- Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- Re: [PATCH v3 11/15] dt-bindings: thermal: Convert Broadcom TMON to YAML
- Re: [PATCH v3 10/15] dt-bindings: rng: Convert iProc RNG200 to YAML
- Re: [PATCH v3 09/15] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- Re: [PATCH v3 07/15] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- Re: [PATCH v3 06/15] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
- Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- Re: [PATCH v3 04/15] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
- Re: [PATCH v3 03/15] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
- [PATCH v2 RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH v2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- [PATCH v2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH RESEND 3] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- [PATCH RESEND 3] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH RESEND 2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- [PATCH 05/17] sata_fsl: Use struct_group() for memcpy() region
- Re: [PATCH RESEND 2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH RESEND 2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- [PATCH RESEND 2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- [PATCH RESEND] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
- Re: [PATCH 14/68] libata: move DPRINTK to ata debugging
- Re: [PATCH 13/68] libata: revamp ata_get_cmd_descript()
- Re: [PATCH 26/68] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining one
- Re: [PATCH 46/68] libata: remove debug compilation switches
- Re: [PATCH 67/68] sata_dwc_460ex: remove 'checkstatus' argument
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [GIT PULL] libata fixes for 5.16-rc5
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
- Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Bartosz Golaszewski
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
- [PATCH 66/68] sata_dwc_460ex: drop DEBUG_NCQ
- [PATCH 68/68] sata_dwc_460ex: Remove debug compile options
- [PATCH 67/68] sata_dwc_460ex: remove 'checkstatus' argument
- [PATCH 62/68] pata_hpt3x2n: convert pr_XXX() calls
- [PATCH 65/68] libata-scsi: rework ata_dump_status to avoid using pr_cont()
- [PATCH 63/68] sata_gemini: convert pr_err() calls
- [PATCH 64/68] pata_hpt366: convert pr_warn() calls
- [PATCH 60/68] pata_hpt37x: convert pr_XXX() calls
- [PATCH 55/68] pata_rz1000: convert printk() calls
- [PATCH 58/68] sata_sx4: convert printk() calls
- [PATCH 59/68] sata_mv: convert remaining printk() to structured logging
- [PATCH 61/68] pata_octeon_cf: Replace pr_XXX() calls with structured logging
- [PATCH 56/68] pata_serverworks: convert printk() calls
- [PATCH 54/68] pata_marvell: convert printk() calls
- [PATCH 57/68] pata_sil680: convert printk() calls
- [PATCH 53/68] pata_it821x: convert printk() calls
- [PATCH 50/68] pata_cs5520: convert printk() calls
- [PATCH 39/68] libata: drop ata_msg_ctl()
- [PATCH 47/68] pata_atp867x: convert printk() calls
- [PATCH 52/68] pata_cypress: convert printk() calls
- [PATCH 46/68] libata: remove debug compilation switches
- [PATCH 43/68] libata: drop ata_msg_info()
- [PATCH 45/68] libata: remove 'new' ata message handling
- [PATCH 42/68] libata: drop ata_msg_probe()
- [PATCH 51/68] pata_cs5536: convert printk() calls
- [PATCH 49/68] pata_cmd64x: convert printk() calls
- [PATCH 44/68] libata: drop ata_msg_drv()
- [PATCH 48/68] pata_cmd640: convert printk() calls
- [PATCH 38/68] libata: drop ata_msg_error() and ata_msg_intr()
- [PATCH 37/68] sata_sx4: add module parameter 'dimm_test'
- [PATCH 34/68] sata_fsl: convert VPRINTK() calls to ata_port_dbg()
- [PATCH 36/68] sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 33/68] sata_nv: drop pointless VPRINTK() calls and convert remaining ones
- [PATCH 40/68] libata: drop ata_msg_malloc()
- [PATCH 29/68] sata_qstor: Drop pointless VPRINTK() calls
- [PATCH 41/68] libata: drop ata_msg_warn()
- [PATCH 35/68] sata_sil: Drop pointless VPRINTK() calls
- [PATCH 22/68] pata_pdc2027x: Replace PDPRINTK() with standard ata logging
- [PATCH 30/68] sata_rcar: Drop pointless VPRINTK() calls
- [PATCH 26/68] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining one
- [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 27/68] pata_via: Drop pointless VPRINTK() calls
- [PATCH 32/68] sata_mv: Drop pointless VPRINTK() call and convert the remaining one
- [PATCH 25/68] pdc_adma: Drop pointless VPRINTK() calls and remove disabled NCQ debugging
- [PATCH 24/68] ahci: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 31/68] sata_inic162x: Drop pointless VPRINTK() calls
- [PATCH 23/68] libata: remove pointless VPRINTK() calls
- [PATCH 16/68] sata_mv: replace DPRINTK with dynamic debugging
- [PATCH 06/68] libata: add reset tracepoints
- [PATCH 21/68] sata_qstor: replace DPRINTK() with ata_port_dbg()
- [PATCH 17/68] pata_octeon_cf: remove DPRINTK() macro in interrupt context
- [PATCH 19/68] sata_fsl: move DPRINTK to ata debugging
- [PATCH 13/68] libata: revamp ata_get_cmd_descript()
- [PATCH 18/68] pdc_adma: Remove DPRINTK call
- [PATCH 20/68] sata_rcar: replace DPRINTK() with ata_port_dbg()
- [PATCH 07/68] libata: add qc_prep tracepoint
- [PATCH 14/68] libata: move DPRINTK to ata debugging
- [PATCH 10/68] libata-scsi: drop DPRINTK calls for cdb translation
- [PATCH 15/68] sata_mv: kill 'port' argument in mv_dump_all_regs()
- [PATCH 08/68] libata: tracepoints for bus-master DMA
- [PATCH 05/68] libata: sanitize ATA_HORKAGE_DUMP_ID
- [PATCH 01/68] libata: remove pointless debugging messages
- [PATCH 09/68] libata-sff: tracepoints for HSM state machine
- [PATCH 12/68] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros
- [PATCH 04/68] libata: move ata_dump_id() to dynamic debugging
- [PATCH 03/68] libata: Add ata_port_classify() helper
- [PATCH 11/68] libata: add tracepoints for ATA error handling
- [PATCHv2 00/68] libata: rework logging, take II
- [PATCH 02/68] libata: whitespace cleanup
- [GIT PULL] libata fixes for 5.16-rc5
- Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- Re: [PATCH] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- [PATCH] libata: if T_LENGTH is zero, dma direction should be DMA_NONE
- [PATCH v1 1/2] ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved
- [PATCH v1 2/2] ata: libahci_platform: Remove bogus 32-bit DMA mask attempt
- [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
- [PATCH v1 1/3] ata: sata_dwc_460ex: Use devm_platform_*ioremap_resource() APIs
- [PATCH v1 3/3] ata: sata_dwc_460ex: Remove unused forward declaration
- Re: [PATCH 22/73] libata: add qc_prep tracepoint
- Re: [PATCH 22/73] libata: add qc_prep tracepoint
- Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
- Re: [PATCH 22/73] libata: add qc_prep tracepoint
- Re: [PATCH 33/73] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining ones
- Re: [PATCH 59/73] pata_cypressx: convert blank printk() calls
- Re: [PATCH 64/73] pata_sil680: convert blank printk() calls
- Re: [PATCH 10/73] libata: drop debugging statements for bus-master DMA
- Re: [PATCH 06/73] sata_mv: kill 'port' argument in mv_dump_all_regs()
- Re: [PATCH 71/73] pata_hpt3x2n: convert pr_err() calls
- Re: [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter
- Re: [PATCH 69/73] pata_octeon_cf: Replace pr_XXX() calls with structured logging
- Re: [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter
- Re: [PATCH 02/73] libata: Add ata_port_classify() helper
- Re: [PATCH 35/73] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
- Re: [PATCH] libata: add horkage for ASMedia 1092
- Re: [PATCH 00/73] libata: rework logging, take II
- Re: [PATCH 72/73] pata_hpt366: convert pr_warn() calls
- Re: [PATCH 71/73] pata_hpt3x2n: convert pr_err() calls
- Re: [PATCH 70/73] pata_hpt3x2n: convert pr_XXX() calls
- Re: [PATCH 68/73] pata_hpt37x: convert pr_XXX() calls
- Re: [PATCH 62/73] pata_rz1000: convert blank printk() calls
- Re: [PATCH 54/73] pata_atp867x: convert blank printk() calls
- Re: [PATCH 32/73] pdc_adma: Drop pointless VPRINTK() calls and convert the remaining ones
- Re: [PATCH 08/73] libata: drop DPRINTK() calls in reset
- Re: [PATCH 24/73] pata_octeon_cf: remove DPRINTK() macro in interrupt context
- Re: [PATCH 21/73] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros
- Re: [PATCH 20/73] libata-eh: remove DPRINTK() calls for request sense
- Re: [PATCH 19/73] libata: drop DPRINTK() calls during ATA error handling
- Re: [PATCH 10/73] libata: drop debugging statements for bus-master DMA
- Re: [PATCH 06/73] sata_mv: kill 'port' argument in mv_dump_all_regs()
- Re: [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter
- Re: [PATCH 02/73] libata: Add ata_port_classify() helper
- Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- [PATCH 51/73] libata: drop ata_msg_drv()
- [PATCH 45/73] libata: drop ata_msg_error() and ata_msg_intr()
- [PATCH 48/73] libata: drop ata_msg_warn()
- [PATCH 47/73] libata: drop ata_msg_malloc()
- [PATCH 52/73] libata: remove 'new' ata message handling
- [PATCH 53/73] libata: remove debug compilation switches
- [PATCH 63/73] pata_serverworks: convert blank printk() calls
- [PATCH 65/73] pdc_adma: remove disabled debugging messages
- [PATCH 67/73] sata_mv: convert remaining printk() to structured logging
- [PATCH 66/73] sata_sx4: convert blank printk() calls
- [PATCH 69/73] pata_octeon_cf: Replace pr_XXX() calls with structured logging
- [PATCH 70/73] pata_hpt3x2n: convert pr_XXX() calls
- [PATCH 71/73] pata_hpt3x2n: convert pr_err() calls
- [PATCH 72/73] pata_hpt366: convert pr_warn() calls
- [PATCH 68/73] pata_hpt37x: convert pr_XXX() calls
- [PATCH 57/73] pata_cs5520: convert blank printk() calls
- [PATCH 41/73] sata_fsl: convert VPRINTK() calls to ata_port_dbg()
- [PATCH 54/73] pata_atp867x: convert blank printk() calls
- [PATCH 60/73] pata_it821x: convert blank printk() calls
- [PATCH 58/73] pata_cs5536: convert blank printk() calls
- [PATCH 62/73] pata_rz1000: convert blank printk() calls
- [PATCH 59/73] pata_cypressx: convert blank printk() calls
- [PATCH 61/73] pata_marvell: convert blank printk() calls
- [PATCH 64/73] pata_sil680: convert blank printk() calls
- [PATCH 43/73] sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 44/73] sata_sx4: add module parameter 'dimm_test'
- [PATCH 46/73] libata: drop ata_msg_ctl()
- [PATCH 39/73] sata_mv: Drop pointless VPRINTK() call and convert the remaining one
- [PATCH 42/73] sata_sil: Drop pointless VPRINTK() calls
- [PATCH 40/73] sata_nv: drop pointless VPRINTK() calls and convert remaining ones
- [PATCH 56/73] pata_cmd64x: convert blank printk() calls
- [PATCH 36/73] sata_qstor: Drop pointless VPRINTK() calls
- [PATCH 35/73] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 73/73] libata-scsi: rework ata_dump_status to avoid using pr_cont()
- [PATCH 50/73] libata: drop ata_msg_info()
- [PATCH 38/73] sata_inic162x: Drop pointless VPRINTK() calls
- [PATCH 55/73] pata_cmd640: convert blank printk() calls
- [PATCH 37/73] sata_rcar: Drop pointless VPRINTK() calls
- [PATCH 34/73] pata_via: Drop pointless VPRINTK() calls
- [PATCH 30/73] libata: remove pointless VPRINTK() calls
- [PATCH 49/73] libata: drop ata_msg_probe()
- [PATCH 31/73] ahci: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 33/73] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 29/73] pata_pdc2027x: Replace PDPRINTK() with standard ata logging
- [PATCH 25/73] pdc_adma: Remove DPRINTK call
- [PATCH 27/73] sata_rcar: replace DPRINTK() with ata_port_dbg()
- [PATCH 22/73] libata: add qc_prep tracepoint
- [PATCH 32/73] pdc_adma: Drop pointless VPRINTK() calls and convert the remaining ones
- [PATCH 23/73] libata: move DPRINTK to ata debugging
- [PATCH 19/73] libata: drop DPRINTK() calls during ATA error handling
- [PATCH 28/73] sata_qstor: replace DPRINTK() with ata_port_dbg()
- [PATCH 20/73] libata-eh: remove DPRINTK() calls for request sense
- [PATCH 26/73] sata_fsl: move DPRINTK to ata debugging
- [PATCH 24/73] pata_octeon_cf: remove DPRINTK() macro in interrupt context
- [PATCH 16/73] libata-sff: add tracepoints for ata_sff_flush_pio_task()
- [PATCH 18/73] libata: add tracepoints for ATA error handling
- [PATCH 14/73] sata_nv: use generic tracepoints
- [PATCH 21/73] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros
- [PATCH 13/73] sata_dwc_460ex: use generic tracepoints
- [PATCH 05/73] sata_mv: replace DPRINTK with 'pci_dump' module parameter
- [PATCH 07/73] libata: add reset tracepoints
- [PATCH 10/73] libata: drop debugging statements for bus-master DMA
- [PATCH 15/73] libata-sff: tracepoints for HSM state machine
- [PATCH 17/73] libata-scsi: drop DPRINTK calls for cdb translation
- [PATCH 11/73] pata_octeon_cf: add bmdma tracepoints and drop DPRINTK() calls
- [PATCH 12/73] pata_arasan_cf: use generic tracepoints
- [PATCH 03/73] libata: move ata_dump_id() to dynamic debugging
- [PATCH 08/73] libata: drop DPRINTK() calls in reset
- [PATCH 09/73] libata: tracepoints for bus-master DMA
- [PATCH 02/73] libata: Add ata_port_classify() helper
- [PATCH 01/73] libata: remove pointless debugging messages
- [PATCH 00/73] libata: rework logging, take II
- [PATCH 06/73] sata_mv: kill 'port' argument in mv_dump_all_regs()
- [PATCH 04/73] libata: sanitize ATA_HORKAGE_DUMP_ID
- Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- Re: [PATCH v2 02/14] dt-bindings: reset: Convert Broadcom STB reset to YAML
- Re: [PATCH] libata: add horkage for ASMedia 1092
- Re: [PATCH] libata: add horkage for ASMedia 1092
- [PATCH] libata: add horkage for ASMedia 1092
- Re: [PATCH v3 12/15] ARM: dts: NSP: Rename SATA unit name
- [PATCH v3 15/15] dt-bindings: usb: Convert BDC to YAML
- [PATCH v3 14/15] dt-bindings: bus: Convert GISB arbiter to YAML
- [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- [PATCH v3 12/15] ARM: dts: NSP: Rename SATA unit name
- [PATCH v3 11/15] dt-bindings: thermal: Convert Broadcom TMON to YAML
- [PATCH v3 10/15] dt-bindings: rng: Convert iProc RNG200 to YAML
- [PATCH v3 09/15] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- [PATCH v3 08/15] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
- [PATCH v3 07/15] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- [PATCH v3 06/15] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
- [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- [PATCH v3 04/15] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
- [PATCH v3 03/15] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
- [PATCH v3 01/15] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
- [PATCH v3 00/15] Broadcom DT bindings updates to YAML
- Re: [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
- Re: [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- Re: [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- Re: [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
- Re: [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- Re: [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- [PATCH v2 11/14] dt-bindings: thermal: Convert Broadcom TMON to YAML
- [PATCH v2 07/14] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- [PATCH v2 10/14] dt-bindings: rng: Convert iProc RNG200 to YAML
- [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- [PATCH v2 08/14] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
- [PATCH v2 06/14] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
- [PATCH v2 04/14] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
- [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- [PATCH v2 14/14] dt-bindings: usb: Convert BDC to YAML
- [PATCH v2 13/14] dt-bindings: bus: Convert GISB arbiter to YAML
- [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
- [PATCH v2 02/14] dt-bindings: reset: Convert Broadcom STB reset to YAML
- [PATCH v2 01/14] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
- [PATCH v2 00/14] Broadcom DT bindings updates to YAML
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]