From: Arnd Bergmann <arnd@xxxxxxxx>
Only the pxafb driver uses this header, so move it into the
same directory. The SMART_* macros are required by some
platform data definitions and can go into the
linux/platform_data/video-pxafb.h header.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Acked-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: linux-fbdev@xxxxxxxxxxxxxxx
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
.../video/fbdev/pxa3xx-regs.h | 19 ----------------
drivers/video/fbdev/pxafb.c | 1 +
include/linux/platform_data/video-pxafb.h | 22 ++++++++++++++++++-
3 files changed, 22 insertions(+), 20 deletions(-)
rename arch/arm/mach-pxa/include/mach/regs-lcd.h => drivers/video/fbdev/pxa3xx-regs.h (90%)
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/drivers/video/fbdev/pxa3xx-regs.h
similarity index 90%
rename from arch/arm/mach-pxa/include/mach/regs-lcd.h
rename to drivers/video/fbdev/pxa3xx-regs.h
index 6a434675f84a..6a96610ef9b5 100644
--- a/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ b/drivers/video/fbdev/pxa3xx-regs.h
@@ -177,23 +177,4 @@
#define PRSR_ST_OK (1 << 9) /* Status OK */
#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */
-#define SMART_CMD_A0 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND (0x1 << 9)
-#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9)
-#define SMART_CMD_NOOP (0x4 << 9)
-#define SMART_CMD_INTERRUPT (0x5 << 9)
-
-#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff))
-
-/* SMART_DELAY() is introduced for software controlled delay primitive which
- * can be inserted between command sequences, unused command 0x6 is used here
- * and delay ranges from 0ms ~ 255ms
- */
-#define SMART_CMD_DELAY (0x6 << 9)
-#define SMART_DELAY(ms) (SMART_CMD_DELAY | ((ms) & 0xff))
#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index edf080f64a8c..ab5bc8272d8e 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -72,6 +72,7 @@
#define DEBUG_VAR 1
#include "pxafb.h"
+#include "pxa3xx-regs.h"
/* Bits which should not be set in machine configuration structures */
#define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM | LCCR0_BM | LCCR0_QDM |\
diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h
index b3d574778326..6333bac166a5 100644
--- a/include/linux/platform_data/video-pxafb.h
+++ b/include/linux/platform_data/video-pxafb.h
@@ -8,7 +8,6 @@
*/
#include <linux/fb.h>
-#include <mach/regs-lcd.h>
/*
* Supported LCD connections
@@ -153,6 +152,27 @@ struct pxafb_mach_info {
void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
unsigned long pxafb_get_hsync_time(struct device *dev);
+/* smartpanel related */
+#define SMART_CMD_A0 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND (0x1 << 9)
+#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9)
+#define SMART_CMD_NOOP (0x4 << 9)
+#define SMART_CMD_INTERRUPT (0x5 << 9)
+
+#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff))
+
+/* SMART_DELAY() is introduced for software controlled delay primitive which
+ * can be inserted between command sequences, unused command 0x6 is used here
+ * and delay ranges from 0ms ~ 255ms
+ */
+#define SMART_CMD_DELAY (0x6 << 9)
+#define SMART_DELAY(ms) (SMART_CMD_DELAY | ((ms) & 0xff))
+
#ifdef CONFIG_FB_PXA_SMARTPANEL
extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
extern int pxafb_smart_flush(struct fb_info *info);
--
2.29.2
