Re: [PATCH 00/21] ata: ahci: Add DWC/Baikal-T1 AHCI SATA support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/29/22 05:06, Damien Le Moal wrote:
> On 3/24/22 09:16, Serge Semin wrote:
> [...]
>> After the denoted above functionality is added we can finally introduce
>> the Baikal-T1 AHCI SATA controller support into the DWC AHCI SATA driver.
>> The controller is based on the DWC AHCI SATA IP-core v4.10a and can work
>> well with the generic DWC AHCI driver. The only peculiarity of it is
>> connected with the SATA Ports reference clock source. It can be supplied
>> either from the internal SoC PLL or from the chip pads. Currently we have
>> to prefer selecting the signal coming from the pads if the corresponding
>> clock source is specified because the link doesn't get stably established
>> when the internal clock signal is activated. In addition the platform has
>> trigger-based reset signals so the corresponding flag must be passed to
>> the generic AHCI-resource getter.
>>
> 
> I am assuming this is "v2" of your patches. Please add this version number
> to your patch titles ("[PATCH v2]") and add a changelog here in the cover
> letter.

Sorry. It looks like I received again the same patch series. Not sure why.
I assumed it was a V2, but it is not.

> 
>> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
>> Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
>> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@xxxxxxxxxxxxxxxxxxxx>
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Cc: linux-ide@xxxxxxxxxxxxxxx
>> Cc: linux-kernel@xxxxxxxxxxxxxxx
>> Cc: devicetree@xxxxxxxxxxxxxxx
>>
>> Serge Semin (21):
>>   dt-bindings: ata: sata: Extend number of SATA ports
>>   dt-bindings: ata: Convert AHCI-bindings to DT schema
>>   ata: libahci_platform: Explicitly set rc on devres_alloc failure
>>   ata: libahci_platform: Convert to using handy devm-ioremap methods
>>   ata: libahci_platform: Convert to using devm bulk clocks API
>>   ata: libahci_platform: Add function returning a clock-handle by id
>>   ata: libahci_platform: Sanity check the DT child nodes number
>>   ata: libahci_platform: Parse ports-implemented property in resources
>>     getter
>>   ata: libahci_platform: Introduce reset assertion/deassertion methods
>>   dt-bindings: ata: ahci: Add platform capability properties
>>   ata: libahci: Extend port-cmd flags set with port capabilities
>>   ata: libahci: Discard redundant force_port_map parameter
>>   ata: libahci: Don't read AHCI version twice in the save-config method
>>   ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments
>>   ata: ahci: Introduce firmware-specific caps initialization
>>   dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema
>>   ata: ahci: Add DWC AHCI SATA controller support
>>   dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema
>>   ata: ahci-dwc: Add platform-specific quirks support
>>   ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support
>>   MAINTAINERS: Add maintainers for DWC AHCI SATA driver
>>
>>  .../devicetree/bindings/ata/ahci-common.yaml  | 176 ++++++
>>  .../devicetree/bindings/ata/ahci-platform.txt |  79 ---
>>  .../bindings/ata/baikal,bt1-ahci.yaml         | 132 +++++
>>  .../devicetree/bindings/ata/generic-ahci.yaml |  98 ++++
>>  .../devicetree/bindings/ata/sata-common.yaml  |   7 +-
>>  .../bindings/ata/snps,dwc-ahci.yaml           | 121 ++++
>>  MAINTAINERS                                   |   9 +
>>  drivers/ata/Kconfig                           |  11 +
>>  drivers/ata/Makefile                          |   1 +
>>  drivers/ata/ahci.c                            |   4 +-
>>  drivers/ata/ahci.h                            |  21 +-
>>  drivers/ata/ahci_dwc.c                        | 525 ++++++++++++++++++
>>  drivers/ata/ahci_mtk.c                        |   2 -
>>  drivers/ata/ahci_platform.c                   |   5 -
>>  drivers/ata/ahci_st.c                         |   3 -
>>  drivers/ata/libahci.c                         |  63 ++-
>>  drivers/ata/libahci_platform.c                | 234 +++++---
>>  include/linux/ahci_platform.h                 |   8 +-
>>  18 files changed, 1321 insertions(+), 178 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/ata/ahci-common.yaml
>>  delete mode 100644 Documentation/devicetree/bindings/ata/ahci-platform.txt
>>  create mode 100644 Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
>>  create mode 100644 Documentation/devicetree/bindings/ata/generic-ahci.yaml
>>  create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
>>  create mode 100644 drivers/ata/ahci_dwc.c
>>
> 
> 


-- 
Damien Le Moal
Western Digital Research



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux