Re: [PATCH v2 00/48] ARM: PXA multiplatform support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/30/22 07:23, Arnd Bergmann wrote:
On Sat, Apr 30, 2022 at 3:32 PM Arnd Bergmann <arnd@xxxxxxxx> wrote:

On Sat, Apr 30, 2022 at 2:41 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
On 4/30/22 01:04, Arnd Bergmann wrote:
and concluded that it must have done this for a long time. In my own qemu
instance, I see a crash from iWMMXt, but that works fine on your machine.
OTOH, your failed instances all look like they either time out or
failed to find a
rootfs. I tried passing an MMC device as root, and that works here.


Booting from mmc works for me as well. Booting from pcmcia worked before,
so I assume that there must be some regression.

Ok, got it, and managed to reproduce the hang now. My "ARM: pxa/sa1100: move
I/O space to PCI_IOBASE" patch managed to get it to the point of detecting
the pcmcia device instead of crashing, so I assumed it was enough when it
clearly was not. Before that patch, it still works, afterwards it hangs with
"pata_pcmcia: probe of 0.0 failed with error -12" as mentioned above. I'll
have another look.

Got it: as the PCMCIA bus on this machine is the only thing with an I/O space,
I assigned it port number range 0-0x1000, with an io_offset of 0, but this
was apparently unexpected and triggered this sanity check:

static int static_find_io(struct pcmcia_socket *s, unsigned int attr,
                         unsigned int *base, unsigned int num,
                         unsigned int align, struct resource **parent)
{
       if (!s->io_offset)
               return -EINVAL;
       ...
       return 0;
}

I moved the devices around now, giving zeus/viper I/O space an offset of
zero, and moving PCMCIA to offset 0x10000 and 0x11000 for the two slots,
which now works because the io_offset is nonzero. I've regenerated the
branches again, and confirmed the for-next branch still boots from pcmcia.



With v5.18-rc1-49-gcb813018b5c1, I still get:

[    0.797668] RAMDISK: Couldn't find valid RAM disk image starting at 0.
[    0.805262] /dev/root: Can't open blockdev
[    0.805487] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    0.805674] Please append a correct "root=" boot option; here are the available partitions:

when trying to boot z2 from initrd.

The other problems are gone.

Guenter



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux