From: Zheyu Ma <zheyuma97@xxxxxxxxx>
[ Upstream commit aafa9f958342db36c17ac2a7f1b841032c96feb4 ]
Before detecting the cable type on the dma bar, the driver should check
whether the 'bmdma_addr' is zero, which means the adapter does not
support DMA, otherwise we will get the following error:
[ 5.146634] Bad IO access at port 0x1 (return inb(port))
[ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[ 5.150856] RIP: 0010:ioread8+0x4a/0x60
[ 5.160238] Call Trace:
[ 5.160470] <TASK>
[ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[ 5.161728] ata_eh_recover+0x3520/0x6cc0
[ 5.168075] ata_do_eh+0x49/0x3c0
Signed-off-by: Zheyu Ma <zheyuma97@xxxxxxxxx>
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/ata/pata_marvell.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index ff468a6fd8dd..677f582cf3d6 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -82,6 +82,8 @@ static int marvell_cable_detect(struct ata_port *ap)
switch(ap->port_no)
{
case 0:
+ if (!ap->ioaddr.bmdma_addr)
+ return ATA_CBL_PATA_UNK;
if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
--
2.35.1
