[PATCH v2] ata: pata_sil680: fix result type of sil680_sel{dev|reg}()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



sil680_sel{dev|reg}() return a PCI config space address but needlessly
use the *unsigned long* type for that,  whereas the PCI config space
accessors take *int* for the address parameter.  Switch these functions
to returning *int*, updating the local variables at their call sites.
Get rid of the 'base' local variables in these functions, while at it...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Signed-off-by: Sergey Shtylyov <s.shtylyov@xxxxxx>

---
This patch is against the 'for-next' branch of Damien Le Moal's 'libata.git'
repo.

Changes in version 2:
- got rid of the 'base' local variables in sil680_sel{dev|reg}(), updating
  the patch description accordingly.

 drivers/ata/pata_sil680.c |   30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

Index: libata/drivers/ata/pata_sil680.c
===================================================================
--- libata.orig/drivers/ata/pata_sil680.c
+++ libata/drivers/ata/pata_sil680.c
@@ -47,11 +47,9 @@
  *	criticial.
  */
 
-static unsigned long sil680_selreg(struct ata_port *ap, int r)
+static int sil680_selreg(struct ata_port *ap, int r)
 {
-	unsigned long base = 0xA0 + r;
-	base += (ap->port_no << 4);
-	return base;
+	return 0xA0 + (ap->port_no << 4) + r;
 }
 
 /**
@@ -65,12 +63,9 @@ static unsigned long sil680_selreg(struc
  *	the unit shift.
  */
 
-static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
+static int sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
 {
-	unsigned long base = 0xA0 + r;
-	base += (ap->port_no << 4);
-	base |= adev->devno ? 2 : 0;
-	return base;
+	return 0xA0 + (ap->port_no << 4) + r + (adev->devno << 1);
 }
 
 
@@ -85,8 +80,9 @@ static unsigned long sil680_seldev(struc
 static int sil680_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	unsigned long addr = sil680_selreg(ap, 0);
+	int addr = sil680_selreg(ap, 0);
 	u8 ata66;
+
 	pci_read_config_byte(pdev, addr, &ata66);
 	if (ata66 & 1)
 		return ATA_CBL_PATA80;
@@ -113,9 +109,9 @@ static void sil680_set_piomode(struct at
 		0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1
 	};
 
-	unsigned long tfaddr = sil680_selreg(ap, 0x02);
-	unsigned long addr = sil680_seldev(ap, adev, 0x04);
-	unsigned long addr_mask = 0x80 + 4 * ap->port_no;
+	int tfaddr = sil680_selreg(ap, 0x02);
+	int addr = sil680_seldev(ap, adev, 0x04);
+	int addr_mask = 0x80 + 4 * ap->port_no;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int pio = adev->pio_mode - XFER_PIO_0;
 	int lowest_pio = pio;
@@ -165,9 +161,9 @@ static void sil680_set_dmamode(struct at
 	static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	unsigned long ma = sil680_seldev(ap, adev, 0x08);
-	unsigned long ua = sil680_seldev(ap, adev, 0x0C);
-	unsigned long addr_mask = 0x80 + 4 * ap->port_no;
+	int ma = sil680_seldev(ap, adev, 0x08);
+	int ua = sil680_seldev(ap, adev, 0x0C);
+	int addr_mask = 0x80 + 4 * ap->port_no;
 	int port_shift = adev->devno * 4;
 	u8 scsc, mode;
 	u16 multi, ultra;
@@ -219,7 +215,7 @@ static void sil680_sff_exec_command(stru
 static bool sil680_sff_irq_check(struct ata_port *ap)
 {
 	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
-	unsigned long addr	= sil680_selreg(ap, 1);
+	int addr		= sil680_selreg(ap, 1);
 	u8 val;
 
 	pci_read_config_byte(pdev, addr, &val);



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux