Add MicroSolutions backpack (Series 6) protocol driver.
Signed-off-by: Ondrej Zary <linux@xxxxxxx>
---
drivers/ata/pata_parport/Kconfig | 18 ++
drivers/ata/pata_parport/Makefile | 1 +
drivers/ata/pata_parport/bpck6.c | 164 ++++++++++
drivers/ata/pata_parport/ppc6lnx.c | 486 +++++++++++++++++++++++++++++
4 files changed, 669 insertions(+)
create mode 100644 drivers/ata/pata_parport/bpck6.c
create mode 100644 drivers/ata/pata_parport/ppc6lnx.c
diff --git a/drivers/ata/pata_parport/Kconfig b/drivers/ata/pata_parport/Kconfig
index ed33a6a5c6fe..e88d9c0bedc6 100644
--- a/drivers/ata/pata_parport/Kconfig
+++ b/drivers/ata/pata_parport/Kconfig
@@ -36,3 +36,21 @@ config PATA_PARPORT_BPCK
answer Y here to build in the protocol driver, otherwise you should
answer M to build it as a loadable module. The module will be
called bpck.
+
+config PATA_PARPORT_BPCK6
+ tristate "MicroSolutions backpack (Series 6) protocol"
+ depends on PATA_PARPORT && !64BIT
+ help
+ This option enables support for the Micro Solutions BACKPACK
+ parallel port Series 6 IDE protocol. (Most BACKPACK drives made
+ after 1999 were Series 6) Series 6 drives will have the Series noted
+ on the bottom of the drive. Series 5 drivers don't always have it
+ noted.
+
+ In other words, if your BACKPACK drive says "Series 6" on the
+ bottom, enable this option.
+
+ If you chose to build PATA_PARPORT support into your kernel, you may
+ answer Y here to build in the protocol driver, otherwise you should
+ answer M to build it as a loadable module. The module will be
+ called bpck6.
diff --git a/drivers/ata/pata_parport/Makefile b/drivers/ata/pata_parport/Makefile
index 1d03e49aa29f..60522279aa16 100644
--- a/drivers/ata/pata_parport/Makefile
+++ b/drivers/ata/pata_parport/Makefile
@@ -9,3 +9,4 @@
obj-$(CONFIG_PATA_PARPORT) += pata_parport.o
obj-$(CONFIG_PATA_PARPORT_ATEN) += aten.o
obj-$(CONFIG_PATA_PARPORT_BPCK) += bpck.o
+obj-$(CONFIG_PATA_PARPORT_BPCK6) += bpck6.o
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
new file mode 100644
index 000000000000..cd517c822ee2
--- /dev/null
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * backpack.c (c) 2001 Micro Solutions Inc.
+ * Released under the terms of the GNU General Public license
+ *
+ * backpack.c is a low-level protocol driver for the Micro Solutions
+ * "BACKPACK" parallel port IDE adapter
+ * (Works on Series 6 drives)
+ *
+ * Written by: Ken Hahn (linux-dev@xxxxxxxxxxxxxxxxxxx)
+ * Clive Turvey (linux-dev@xxxxxxxxxxxxxxxxxxx)
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/parport.h>
+
+#include "ppc6lnx.c"
+#include "pata_parport.h"
+
+#define PPCSTRUCT(pi) ((struct ppc_storage *)(pi->private))
+
+#define ATAPI_DATA 0 /* data port */
+
+static int bpck6_read_regr(struct pi_adapter *pi, int cont, int reg)
+{
+ unsigned int out;
+
+ /* check for bad settings */
+ if (reg < 0 || reg > 7 || cont < 0 || cont > 2)
+ return -1;
+ out = ppc6_rd_port(PPCSTRUCT(pi), cont ? reg | 8 : reg);
+ return out;
+}
+
+static void bpck6_write_regr(struct pi_adapter *pi, int cont, int reg, int val)
+{
+ /* check for bad settings */
+ if (reg >= 0 && reg <= 7 && cont >= 0 && cont <= 1)
+ ppc6_wr_port(PPCSTRUCT(pi), cont ? reg | 8 : reg, (u8)val);
+}
+
+static void bpck6_write_block(struct pi_adapter *pi, char *buf, int len)
+{
+ ppc6_wr_port16_blk(PPCSTRUCT(pi), ATAPI_DATA, buf, (u32)len >> 1);
+}
+
+static void bpck6_read_block(struct pi_adapter *pi, char *buf, int len)
+{
+ ppc6_rd_port16_blk(PPCSTRUCT(pi), ATAPI_DATA, buf, (u32) len >> 1);
+}
+
+static void bpck6_connect(struct pi_adapter *pi)
+{
+ if (pi->mode >= 2)
+ PPCSTRUCT(pi)->mode = 4 + pi->mode - 2;
+ else if (pi->mode == 1)
+ PPCSTRUCT(pi)->mode = 3;
+ else
+ PPCSTRUCT(pi)->mode = 1;
+
+ ppc6_open(PPCSTRUCT(pi));
+ ppc6_wr_extout(PPCSTRUCT(pi), 0x3);
+}
+
+static void bpck6_disconnect(struct pi_adapter *pi)
+{
+ ppc6_wr_extout(PPCSTRUCT(pi), 0x0);
+ ppc6_close(PPCSTRUCT(pi));
+}
+
+static int bpck6_test_port(struct pi_adapter *pi) /* check for 8-bit port */
+{
+ /* copy over duplicate stuff.. initialize state info */
+ PPCSTRUCT(pi)->ppc_id = pi->unit;
+ PPCSTRUCT(pi)->lpt_addr = pi->port;
+
+ /* look at the parport device to see if what modes we can use */
+ if (((struct pardevice *)(pi->pardev))->port->modes &
+ (PARPORT_MODE_EPP))
+ return 5; /* Can do EPP*/
+ else if (((struct pardevice *)(pi->pardev))->port->modes &
+ (PARPORT_MODE_TRISTATE))
+ return 2;
+ else /* Just flat SPP */
+ return 1;
+}
+
+static int bpck6_probe_unit(struct pi_adapter *pi)
+{
+ int out;
+
+ /* SET PPC UNIT NUMBER */
+ PPCSTRUCT(pi)->ppc_id = pi->unit;
+
+ /* LOWER DOWN TO UNIDIRECTIONAL */
+ PPCSTRUCT(pi)->mode = 1;
+
+ out = ppc6_open(PPCSTRUCT(pi));
+
+ if (out) {
+ ppc6_close(PPCSTRUCT(pi));
+ return 1;
+ }
+
+ return 0;
+}
+
+static void bpck6_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+{
+ static char * const mode_string[] = {
+ "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
+
+ dev_info(&pi->dev, "bpck6, Micro Solutions BACKPACK Drive at 0x%x\n",
+ pi->port);
+ dev_info(&pi->dev, "Unit: %d Mode:%d (%s) Delay %d\n",
+ pi->unit, pi->mode, mode_string[pi->mode], pi->delay);
+}
+
+static int bpck6_init_proto(struct pi_adapter *pi)
+{
+ struct ppc_storage *p = kzalloc(sizeof(struct ppc_storage), GFP_KERNEL);
+
+ if (p) {
+ pi->private = (unsigned long)p;
+ return 0;
+ }
+
+ return -ENOMEM;
+}
+
+static void bpck6_release_proto(struct pi_adapter *pi)
+{
+ kfree((void *)(pi->private));
+}
+
+static struct pi_protocol bpck6 = {
+ .owner = THIS_MODULE,
+ .name = "bpck6",
+ .max_mode = 5,
+ .epp_first = 2, /* 2-5 use epp (need 8 ports) */
+ .max_units = 255,
+ .write_regr = bpck6_write_regr,
+ .read_regr = bpck6_read_regr,
+ .write_block = bpck6_write_block,
+ .read_block = bpck6_read_block,
+ .connect = bpck6_connect,
+ .disconnect = bpck6_disconnect,
+ .test_port = bpck6_test_port,
+ .probe_unit = bpck6_probe_unit,
+ .log_adapter = bpck6_log_adapter,
+ .init_proto = bpck6_init_proto,
+ .release_proto = bpck6_release_proto,
+ .sht = { PATA_PARPORT_SHT("pata_parport-bpck6") },
+};
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Micro Solutions Inc.");
+MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE");
+module_pata_parport_driver(bpck6);
diff --git a/drivers/ata/pata_parport/ppc6lnx.c b/drivers/ata/pata_parport/ppc6lnx.c
new file mode 100644
index 000000000000..52e0f08548c9
--- /dev/null
+++ b/drivers/ata/pata_parport/ppc6lnx.c
@@ -0,0 +1,486 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ppc6lnx.c (c) 2001 Micro Solutions Inc.
+ * Released under the terms of the GNU General Public license
+ *
+ * ppc6lnx.c is a part of the protocol driver for the Micro Solutions
+ * "BACKPACK" parallel port IDE adapter
+ * (Works on Series 6 drives)
+ */
+
+/* PPC 6 Code in C sanitized for LINUX */
+/* Original x86 ASM by Ron, Converted to C by Clive */
+
+#define port_stb 1
+#define port_afd 2
+#define cmd_stb port_afd
+#define port_init 4
+#define data_stb port_init
+#define port_sel 8
+#define port_int 16
+#define port_dir 0x20
+
+#define ECR_EPP 0x80
+#define ECR_BI 0x20
+
+/* 60772 Commands */
+#define ACCESS_REG 0x00
+#define ACCESS_PORT 0x40
+
+#define ACCESS_READ 0x00
+#define ACCESS_WRITE 0x20
+
+/* 60772 Command Prefix */
+
+#define CMD_PREFIX_SET 0xe0 /* Special cmd that modifies the next command's operation */
+#define CMD_PREFIX_RESET 0xc0 /* Resets current cmd modifier reg bits */
+ #define PREFIX_IO16 0x01 /* perform 16-bit wide I/O */
+ #define PREFIX_FASTWR 0x04 /* enable PPC mode fast-write */
+ #define PREFIX_BLK 0x08 /* enable block transfer mode */
+
+/* 60772 Registers */
+
+#define REG_STATUS 0x00 /* status register */
+ #define STATUS_IRQA 0x01 /* Peripheral IRQA line */
+ #define STATUS_EEPROM_DO 0x40 /* Serial EEPROM data bit */
+#define REG_VERSION 0x01 /* PPC version register (read) */
+#define REG_HWCFG 0x02 /* Hardware Config register */
+#define REG_RAMSIZE 0x03 /* Size of RAM Buffer */
+ #define RAMSIZE_128K 0x02
+#define REG_EEPROM 0x06 /* EEPROM control register */
+ #define EEPROM_SK 0x01 /* eeprom SK bit */
+ #define EEPROM_DI 0x02 /* eeprom DI bit */
+ #define EEPROM_CS 0x04 /* eeprom CS bit */
+ #define EEPROM_EN 0x08 /* eeprom output enable */
+#define REG_BLKSIZE 0x08 /* Block transfer len (24 bit) */
+
+struct ppc_storage {
+ u16 lpt_addr; /* LPT base address */
+ u8 ppc_id;
+ u8 mode; /* operating mode */
+ /* 0 = PPC Uni SW */
+ /* 1 = PPC Uni FW */
+ /* 2 = PPC Bi SW */
+ /* 3 = PPC Bi FW */
+ /* 4 = EPP Byte */
+ /* 5 = EPP Word */
+ /* 6 = EPP Dword */
+ u8 ppc_flags;
+ u8 org_data; /* original LPT data port contents */
+ u8 org_ctrl; /* original LPT control port contents */
+ u8 cur_ctrl; /* current control port contents */
+};
+
+/* ppc_flags */
+#define fifo_wait 0x10
+
+/* DONT CHANGE THESE LEST YOU BREAK EVERYTHING - BIT FIELD DEPENDENCIES */
+#define PPCMODE_UNI_SW 0
+#define PPCMODE_UNI_FW 1
+#define PPCMODE_BI_SW 2
+#define PPCMODE_BI_FW 3
+#define PPCMODE_EPP_BYTE 4
+#define PPCMODE_EPP_WORD 5
+#define PPCMODE_EPP_DWORD 6
+
+static int ppc6_select(struct ppc_storage *ppc);
+static void ppc6_deselect(struct ppc_storage *ppc);
+static void ppc6_send_cmd(struct ppc_storage *ppc, u8 cmd);
+static void ppc6_wr_data_byte(struct ppc_storage *ppc, u8 data);
+static u8 ppc6_rd_data_byte(struct ppc_storage *ppc);
+static u8 ppc6_rd_port(struct ppc_storage *ppc, u8 port);
+static void ppc6_wr_port(struct ppc_storage *ppc, u8 port, u8 data);
+static void ppc6_rd_data_blk(struct ppc_storage *ppc, u8 *data, long count);
+static void ppc6_wait_for_fifo(struct ppc_storage *ppc);
+static void ppc6_wr_data_blk(struct ppc_storage *ppc, u8 *data, long count);
+static void ppc6_rd_port16_blk(struct ppc_storage *ppc, u8 port, u8 *data, long length);
+static void ppc6_wr_port16_blk(struct ppc_storage *ppc, u8 port, u8 *data, long length);
+static void ppc6_wr_extout(struct ppc_storage *ppc, u8 regdata);
+static int ppc6_open(struct ppc_storage *ppc);
+static void ppc6_close(struct ppc_storage *ppc);
+
+static int ppc6_select(struct ppc_storage *ppc)
+{
+ u8 i, j, k;
+
+ i = inb(ppc->lpt_addr + 1);
+ if (i & 1)
+ outb(i, ppc->lpt_addr + 1);
+
+ ppc->org_data = inb(ppc->lpt_addr);
+ ppc->org_ctrl = inb(ppc->lpt_addr + 2) & 0x5F; /* readback ctrl */
+ ppc->cur_ctrl = ppc->org_ctrl;
+ ppc->cur_ctrl |= port_sel;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ if (ppc->org_data == 'b')
+ outb('x', ppc->lpt_addr);
+ outb('b', ppc->lpt_addr);
+ outb('p', ppc->lpt_addr);
+ outb(ppc->ppc_id, ppc->lpt_addr);
+ outb(~ppc->ppc_id, ppc->lpt_addr);
+ ppc->cur_ctrl &= ~port_sel;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ ppc->cur_ctrl = (ppc->cur_ctrl & port_int) | port_init;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ i = ppc->mode & 0x0C;
+ if (i == 0)
+ i = (ppc->mode & 2) | 1;
+ outb(i, ppc->lpt_addr);
+ ppc->cur_ctrl |= port_sel;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ /* DELAY */
+ ppc->cur_ctrl |= port_afd;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ j = ((i & 0x08) << 4) | ((i & 0x07) << 3);
+ k = inb(ppc->lpt_addr + 1) & 0xB8;
+ if (j == k) {
+ ppc->cur_ctrl &= ~port_afd;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ k = (inb(ppc->lpt_addr + 1) & 0xB8) ^ 0xB8;
+ if (j == k) {
+ if (i & 4) /* EPP */
+ ppc->cur_ctrl &= ~(port_sel | port_init);
+ else /* PPC/ECP */
+ ppc->cur_ctrl &= ~port_sel;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ return 1;
+ }
+ }
+ outb(ppc->org_ctrl, ppc->lpt_addr + 2);
+ outb(ppc->org_data, ppc->lpt_addr);
+
+ return 0; /* FAIL */
+}
+
+static void ppc6_deselect(struct ppc_storage *ppc)
+{
+ if (ppc->mode & 4) /* EPP */
+ ppc->cur_ctrl |= port_init;
+ else /* PPC/ECP */
+ ppc->cur_ctrl |= port_sel;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ outb(ppc->org_data, ppc->lpt_addr);
+ outb((ppc->org_ctrl | port_sel), ppc->lpt_addr + 2);
+ outb(ppc->org_ctrl, ppc->lpt_addr + 2);
+}
+
+static void ppc6_send_cmd(struct ppc_storage *ppc, u8 cmd)
+{
+ switch (ppc->mode) {
+ case PPCMODE_UNI_SW:
+ case PPCMODE_UNI_FW:
+ case PPCMODE_BI_SW:
+ case PPCMODE_BI_FW:
+ outb(cmd, ppc->lpt_addr);
+ ppc->cur_ctrl ^= cmd_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ break;
+ case PPCMODE_EPP_BYTE:
+ case PPCMODE_EPP_WORD:
+ case PPCMODE_EPP_DWORD:
+ outb(cmd, ppc->lpt_addr + 3);
+ break;
+ }
+}
+
+static void ppc6_wr_data_byte(struct ppc_storage *ppc, u8 data)
+{
+ switch (ppc->mode) {
+ case PPCMODE_UNI_SW:
+ case PPCMODE_UNI_FW:
+ case PPCMODE_BI_SW:
+ case PPCMODE_BI_FW:
+ outb(data, ppc->lpt_addr);
+ ppc->cur_ctrl ^= data_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ break;
+ case PPCMODE_EPP_BYTE:
+ case PPCMODE_EPP_WORD:
+ case PPCMODE_EPP_DWORD:
+ outb(data, ppc->lpt_addr + 4);
+ break;
+ }
+}
+
+static u8 ppc6_rd_data_byte(struct ppc_storage *ppc)
+{
+ u8 data = 0;
+
+ switch (ppc->mode) {
+ case PPCMODE_UNI_SW:
+ case PPCMODE_UNI_FW:
+ ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ /* DELAY */
+ data = inb(ppc->lpt_addr + 1);
+ data = ((data & 0x80) >> 1) | ((data & 0x38) >> 3);
+ ppc->cur_ctrl |= port_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ /* DELAY */
+ data |= inb(ppc->lpt_addr + 1) & 0xB8;
+ break;
+ case PPCMODE_BI_SW:
+ case PPCMODE_BI_FW:
+ ppc->cur_ctrl |= port_dir;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ ppc->cur_ctrl = (ppc->cur_ctrl | port_stb) ^ data_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ data = inb(ppc->lpt_addr);
+ ppc->cur_ctrl &= ~port_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ ppc->cur_ctrl &= ~port_dir;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ break;
+ case PPCMODE_EPP_BYTE:
+ case PPCMODE_EPP_WORD:
+ case PPCMODE_EPP_DWORD:
+ outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
+ data = inb(ppc->lpt_addr + 4);
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ break;
+ }
+
+ return data;
+}
+
+static u8 ppc6_rd_port(struct ppc_storage *ppc, u8 port)
+{
+ ppc6_send_cmd(ppc, port | ACCESS_PORT | ACCESS_READ);
+
+ return ppc6_rd_data_byte(ppc);
+}
+
+static void ppc6_wr_port(struct ppc_storage *ppc, u8 port, u8 data)
+{
+ ppc6_send_cmd(ppc, port | ACCESS_PORT | ACCESS_WRITE);
+
+ ppc6_wr_data_byte(ppc, data);
+}
+
+static void ppc6_rd_data_blk(struct ppc_storage *ppc, u8 *data, long count)
+{
+ switch (ppc->mode) {
+ case PPCMODE_UNI_SW:
+ case PPCMODE_UNI_FW:
+ while (count) {
+ u8 d;
+
+ ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ /* DELAY */
+ d = inb(ppc->lpt_addr + 1);
+ d = ((d & 0x80) >> 1) | ((d & 0x38) >> 3);
+ ppc->cur_ctrl |= port_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ /* DELAY */
+ d |= inb(ppc->lpt_addr + 1) & 0xB8;
+ *data++ = d;
+ count--;
+ }
+ break;
+ case PPCMODE_BI_SW:
+ case PPCMODE_BI_FW:
+ ppc->cur_ctrl |= port_dir;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ ppc->cur_ctrl |= port_stb;
+ while (count) {
+ ppc->cur_ctrl ^= data_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ *data++ = inb(ppc->lpt_addr);
+ count--;
+ }
+ ppc->cur_ctrl &= ~port_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ ppc->cur_ctrl &= ~port_dir;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ break;
+ case PPCMODE_EPP_BYTE:
+ outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
+ /* DELAY */
+ while (count) {
+ *data++ = inb(ppc->lpt_addr + 4);
+ count--;
+ }
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ break;
+ case PPCMODE_EPP_WORD:
+ outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
+ /* DELAY */
+ while (count > 1) {
+ *((u16 *)data) = inw(ppc->lpt_addr + 4);
+ data += 2;
+ count -= 2;
+ }
+ while (count) {
+ *data++ = inb(ppc->lpt_addr + 4);
+ count--;
+ }
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ break;
+ case PPCMODE_EPP_DWORD:
+ outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
+ /* DELAY */
+ while (count > 3) {
+ *((u32 *)data) = inl(ppc->lpt_addr + 4);
+ data += 4;
+ count -= 4;
+ }
+ while (count) {
+ *data++ = inb(ppc->lpt_addr + 4);
+ count--;
+ }
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ break;
+ }
+}
+
+static void ppc6_wait_for_fifo(struct ppc_storage *ppc)
+{
+ int i;
+
+ if (ppc->ppc_flags & fifo_wait)
+ for (i = 0; i < 20; i++)
+ inb(ppc->lpt_addr + 1);
+}
+
+static void ppc6_wr_data_blk(struct ppc_storage *ppc, u8 *data, long count)
+{
+ u8 this, last;
+
+ switch (ppc->mode) {
+ case PPCMODE_UNI_SW:
+ case PPCMODE_BI_SW:
+ while (count--) {
+ outb(*data++, ppc->lpt_addr);
+ ppc->cur_ctrl ^= data_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ }
+ break;
+ case PPCMODE_UNI_FW:
+ case PPCMODE_BI_FW:
+ ppc6_send_cmd(ppc, CMD_PREFIX_SET | PREFIX_FASTWR);
+ ppc->cur_ctrl |= port_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ last = *data;
+ outb(last, ppc->lpt_addr);
+ while (count) {
+ this = *data++;
+ count--;
+
+ if (this == last) {
+ ppc->cur_ctrl ^= data_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ } else {
+ outb(this, ppc->lpt_addr);
+ last = this;
+ }
+ }
+ ppc->cur_ctrl &= ~port_stb;
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ ppc6_send_cmd(ppc, CMD_PREFIX_RESET | PREFIX_FASTWR);
+ break;
+ case PPCMODE_EPP_BYTE:
+ while (count) {
+ outb(*data++, ppc->lpt_addr + 4);
+ count--;
+ }
+ ppc6_wait_for_fifo(ppc);
+ break;
+ case PPCMODE_EPP_WORD:
+ while (count > 1) {
+ outw(*((u16 *)data), ppc->lpt_addr + 4);
+ data += 2;
+ count -= 2;
+ }
+ while (count) {
+ outb(*data++, ppc->lpt_addr + 4);
+ count--;
+ }
+ ppc6_wait_for_fifo(ppc);
+ break;
+ case PPCMODE_EPP_DWORD:
+ while (count > 3) {
+ outl(*((u32 *)data), ppc->lpt_addr + 4);
+ data += 4;
+ count -= 4;
+ }
+ while (count) {
+ outb(*data++, ppc->lpt_addr + 4);
+ count--;
+ }
+ ppc6_wait_for_fifo(ppc);
+ break;
+ }
+}
+
+static void ppc6_rd_port16_blk(struct ppc_storage *ppc, u8 port, u8 *data, long length)
+{
+ length = length << 1;
+
+ ppc6_send_cmd(ppc, REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE);
+ ppc6_wr_data_byte(ppc, (u8)length);
+ ppc6_wr_data_byte(ppc, (u8)(length >> 8));
+ ppc6_wr_data_byte(ppc, 0);
+
+ ppc6_send_cmd(ppc, CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK);
+
+ ppc6_send_cmd(ppc, port | ACCESS_PORT | ACCESS_READ);
+
+ ppc6_rd_data_blk(ppc, data, length);
+
+ ppc6_send_cmd(ppc, CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK);
+}
+
+static void ppc6_wr_port16_blk(struct ppc_storage *ppc, u8 port, u8 *data, long length)
+{
+ length = length << 1;
+
+ ppc6_send_cmd(ppc, REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE);
+ ppc6_wr_data_byte(ppc, (u8)length);
+ ppc6_wr_data_byte(ppc, (u8)(length >> 8));
+ ppc6_wr_data_byte(ppc, 0);
+
+ ppc6_send_cmd(ppc, CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK);
+
+ ppc6_send_cmd(ppc, port | ACCESS_PORT | ACCESS_WRITE);
+
+ ppc6_wr_data_blk(ppc, data, length);
+
+ ppc6_send_cmd(ppc, CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK);
+}
+
+static void ppc6_wr_extout(struct ppc_storage *ppc, u8 regdata)
+{
+ ppc6_send_cmd(ppc, REG_VERSION | ACCESS_REG | ACCESS_WRITE);
+
+ ppc6_wr_data_byte(ppc, (regdata & 0x03) << 6);
+}
+
+static int ppc6_open(struct ppc_storage *ppc)
+{
+ int ret;
+
+ ret = ppc6_select(ppc);
+ if (ret == 0)
+ return ret;
+
+ ppc->ppc_flags &= ~fifo_wait;
+
+ ppc6_send_cmd(ppc, ACCESS_REG | ACCESS_WRITE | REG_RAMSIZE);
+ ppc6_wr_data_byte(ppc, RAMSIZE_128K);
+
+ ppc6_send_cmd(ppc, ACCESS_REG | ACCESS_READ | REG_VERSION);
+
+ if ((ppc6_rd_data_byte(ppc) & 0x3F) == 0x0C)
+ ppc->ppc_flags |= fifo_wait;
+
+ return ret;
+}
+
+static void ppc6_close(struct ppc_storage *ppc)
+{
+ ppc6_deselect(ppc);
+}
--
Ondrej Zary
