Re: [PATCH v2 00/48] ARM: PXA multiplatform support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/2/22 12:21, Arnd Bergmann wrote:
On Mon, May 2, 2022 at 6:26 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:

With v5.18-rc1-49-gcb813018b5c1, I still get:

[    0.797668] RAMDISK: Couldn't find valid RAM disk image starting at 0.
[    0.805262] /dev/root: Can't open blockdev
[    0.805487] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    0.805674] Please append a correct "root=" boot option; here are the available partitions:

when trying to boot z2 from initrd.

The other problems are gone.

Ok, progress!

What is your qemu command line? I see that z2 has no pcmcia device, so
I tried booting
from MMC, but this already fails with 5.18-rc1 without any of my
patches, giving me

[    0.697481] Creating 3 MTD partitions on "physmap-flash":
[    0.698161] 0x000000000000-0x000000040000 : "U-Boot Bootloader"
[    0.702815] 0x000000040000-0x000000060000 : "U-Boot Environment"
[    0.706541] 0x000000060000-0x000000800000 : "Flash"
[    0.718066] pxa2xx-mci pxa2xx-mci.0: incomplete constraints, dummy
supplies not allowed
[    0.718501] pxa2xx-mci pxa2xx-mci.0: incomplete constraints, dummy
supplies not allowed


To boot from initrd:

qemu-system-arm -M z2 -kernel \
     arch/arm/boot/zImage -no-reboot -initrd \
     rootfs-armv5.cpio --append \
     "panic=-1 slub_debug=FZPUA rdinit=/sbin/init console=ttyS0" -nographic \
     -monitor null -serial stdio

where rootfs-armv5.cpio is from my repository at github.com.

https://github.com/groeck/linux-build-test/blob/master/rootfs/arm/rootfs-armv5.cpio.gz

Do  you have MMC or some other rootfs working without my patch series?


I can boot z2 from mmc and flash, but I have a number of configuration
flags enabled on top of pxa_defconfig. That also works with your latest patch
series. See
https://kerneltests.org/builders/qemu-arm-testing/builds/75/steps/qemubuildcommand/logs/stdio

    # Always enable ...
    enable_config "${defconfig}" CONFIG_DEVTMPFS CONFIG_DEVTMPFS_MOUNT CONFIG_BLK_DEV_INITRD
    # Options needed to be built into the kernel for device support
    # on pxa devices
    # MTD, squashfs
    enable_config_cond "${defconfig}" CONFIG_MTD_BLOCK CONFIG_MTD_PXA2XX CONFIG_SQUASHFS
    # MMC
    enable_config_cond "${defconfig}" CONFIG_MMC_BLOCK CONFIG_MMC_PXA
    # PCMCIA
    enable_config_cond "${defconfig}" CONFIG_ATA CONFIG_BLK_DEV_SD CONFIG_PCCARD
    enable_config_cond "${defconfig}" CONFIG_PCMCIA CONFIG_PATA_PCMCIA CONFIG_PCMCIA_PXA2XX
    # USB
    enable_config_cond "${defconfig}" CONFIG_USB CONFIG_USB_STORAGE CONFIG_USB_OHCI_HCD CONFIG_USB_OHCI_HCD_PXA27X

Hope this helps,
Guenter



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux