Remove the unneeded comma after the last field of the array entries.
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-core.c | 96 +++++++++++++++++++--------------------
1 file changed, 48 insertions(+), 48 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index cceedde51126..bc59c77b99b6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3898,7 +3898,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Devices where NCQ should be avoided */
/* NCQ is slow */
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
- { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
+ { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ },
/* http://thread.gmane.org/gmane.linux.ide/14907 */
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
/* NCQ is broken */
@@ -3924,23 +3924,23 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* drives which fail FPDMA_AA activation (some may freeze afterwards)
the ST disks also have LPM issues */
{ "ST1000LM024 HN-M101MBB", NULL, ATA_HORKAGE_BROKEN_FPDMA_AA |
- ATA_HORKAGE_NOLPM, },
+ ATA_HORKAGE_NOLPM },
{ "VB0250EAVER", "HPG7", ATA_HORKAGE_BROKEN_FPDMA_AA },
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
- { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
- { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
- { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
+ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ },
+ { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ },
+ { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ },
/* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
- { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, },
+ { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ },
/* Sandisk SD7/8/9s lock up hard on large trims */
- { "SanDisk SD[789]*", NULL, ATA_HORKAGE_MAX_TRIM_128M, },
+ { "SanDisk SD[789]*", NULL, ATA_HORKAGE_MAX_TRIM_128M },
/* devices which puke on READ_NATIVE_MAX */
- { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
+ { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA },
{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
{ "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
@@ -3949,22 +3949,22 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
/* Devices which report 1 sector over size HPA */
- { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
- { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
- { "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE, },
+ { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE },
+ { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE },
+ { "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE },
/* Devices which get the IVB wrong */
- { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
+ { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB },
/* Maybe we should just blacklist TSSTcorp... */
- { "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]", ATA_HORKAGE_IVB, },
+ { "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]", ATA_HORKAGE_IVB },
/* Devices that do not need bridging limits applied */
- { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
- { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, },
+ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK },
+ { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK },
/* Devices which aren't very happy with higher link speeds */
- { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
- { "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS, },
+ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS },
+ { "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS },
/*
* Devices which choke on SETXFER. Applies only if both the
@@ -3982,54 +3982,54 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */
{ "Crucial_CT512MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM |
- ATA_HORKAGE_NOLPM, },
+ ATA_HORKAGE_NOLPM },
/* 512GB MX100 with newer firmware has only LPM issues */
{ "Crucial_CT512MX100*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM |
- ATA_HORKAGE_NOLPM, },
+ ATA_HORKAGE_NOLPM },
/* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
{ "Crucial_CT480M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM |
- ATA_HORKAGE_NOLPM, },
+ ATA_HORKAGE_NOLPM },
{ "Crucial_CT960M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM |
- ATA_HORKAGE_NOLPM, },
+ ATA_HORKAGE_NOLPM },
/* These specific Samsung models/firmware-revs do not handle LPM well */
- { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
- { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM, },
- { "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM, },
- { "SAMSUNG MZ7TE512HMHP-000L1", "EXT06L0Q", ATA_HORKAGE_NOLPM, },
+ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM },
+ { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM },
+ { "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM },
+ { "SAMSUNG MZ7TE512HMHP-000L1", "EXT06L0Q", ATA_HORKAGE_NOLPM },
/* devices that don't properly handle queued TRIM commands */
{ "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Micron_M5[15]0_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Crucial_CT*M550*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Samsung SSD 840*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Samsung SSD 850*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
{ "Samsung SSD 860*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM |
- ATA_HORKAGE_NO_NCQ_ON_ATI, },
+ ATA_HORKAGE_NO_NCQ_ON_ATI },
{ "Samsung SSD 870*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM |
- ATA_HORKAGE_NO_NCQ_ON_ATI, },
+ ATA_HORKAGE_NO_NCQ_ON_ATI },
{ "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
- ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ ATA_HORKAGE_ZERO_AFTER_TRIM },
/* devices that don't properly handle TRIM commands */
- { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, },
- { "M88V29*", NULL, ATA_HORKAGE_NOTRIM, },
+ { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM },
+ { "M88V29*", NULL, ATA_HORKAGE_NOTRIM },
/*
* As defined, the DRAT (Deterministic Read After Trim) and RZAT
@@ -4047,16 +4047,16 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
* The intel 510 drive has buggy DRAT/RZAT. Explicitly exclude
* that model before whitelisting all other intel SSDs.
*/
- { "INTEL*SSDSC2MH*", NULL, 0, },
-
- { "Micron*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "Crucial*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "INTEL*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "SAMSUNG*MZ7KM*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "INTEL*SSDSC2MH*", NULL, 0 },
+
+ { "Micron*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
+ { "Crucial*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
+ { "INTEL*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
+ { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
+ { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
+ { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
+ { "SAMSUNG*MZ7KM*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
+ { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
/*
* Some WD SATA-I drives spin up and down erratically when the link
--
2.35.1
