Re: [PATCH v0] pata_parport: add driver (PARIDE replacement)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/11/22 06:28, Ondrej Zary wrote:
> Add pata_parport (PARIDE replacement) core libata driver.
> 
> The original paride protocol modules are used for now so allow them to
> be compiled without old PARIDE core.
> 
> Signed-off-by: Ondrej Zary <linux@xxxxxxx>
> ---
>  drivers/Makefile                   |   2 +-
>  drivers/ata/Kconfig                |  22 +
>  drivers/ata/Makefile               |   2 +
>  drivers/ata/parport/Makefile       |   3 +
>  drivers/ata/parport/pata_parport.c | 805 +++++++++++++++++++++++++++++
>  drivers/ata/parport/pata_parport.h | 108 ++++
>  drivers/block/paride/Kconfig       |  32 +-
>  drivers/block/paride/paride.h      |   5 +
>  8 files changed, 962 insertions(+), 17 deletions(-)
>  create mode 100644 drivers/ata/parport/Makefile
>  create mode 100644 drivers/ata/parport/pata_parport.c
>  create mode 100644 drivers/ata/parport/pata_parport.h
> 
> diff --git a/drivers/Makefile b/drivers/Makefile
> index a110338c860c..8ec515f3614e 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -98,7 +98,7 @@ obj-$(CONFIG_DIO)		+= dio/
>  obj-$(CONFIG_SBUS)		+= sbus/
>  obj-$(CONFIG_ZORRO)		+= zorro/
>  obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
> -obj-$(CONFIG_PARIDE) 		+= block/paride/
> +obj-y		 		+= block/paride/
>  obj-$(CONFIG_TC)		+= tc/
>  obj-$(CONFIG_USB_PHY)		+= usb/
>  obj-$(CONFIG_USB)		+= usb/
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index e5641e6c52ee..671c27b77a48 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -1161,6 +1161,28 @@ config PATA_WINBOND_VLB
>  	  Support for the Winbond W83759A controller on Vesa Local Bus
>  	  systems.
>  
> +config PATA_PARPORT
> +	tristate "Parallel port IDE device support"
> +	depends on PARPORT_PC && PARIDE=n

This is very confusing. The change above this one switch paride
compilation to be unconditional, regardless of CONFIG_PARIDE value, but
here, you have the dependency to PARIDE=n. I do not understand... Please
clarify.

The commit message is also way too light given the size of this patch.
Better explanation is needed.

> +	help
> +	  There are many external CD-ROM and disk devices that connect through
> +	  your computer's parallel port. Most of them are actually IDE devices
> +	  using a parallel port IDE adapter. This option enables the
> +	  PATA_PARPORT subsystem which contains drivers for many of these
> +	  external drives.
> +	  Read <file:Documentation/admin-guide/blockdev/paride.rst> for more
> +	  information.
> +
> +	  If your parallel port support is in a loadable module, you must build
> +	  PATA_PARPORT as a module. If you built PATA_PARPORT support into your
> +	  kernel, you may still build the individual protocol modules
> +	  as loadable modules. Use the old PARIDE protocol modules.
> +	  If you build this support as a module, it will be called pata_parport.
> +
> +	  Unlike the old PARIDE, there are no high-level drivers needed.
> +	  The IDE devices behind parallel port adapters are handled by the
> +	  ATA layer.
> +
>  comment "Generic fallback / legacy drivers"
>  
>  config PATA_ACPI
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index b8aebfb14e82..171045578541 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -114,6 +114,8 @@ obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o
>  
>  obj-$(CONFIG_PATA_PXA)		+= pata_pxa.o
>  
> +obj-$(CONFIG_PATA_PARPORT)	+= parport/
> +
>  # Should be last but two libata driver
>  obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
>  # Should be last but one libata driver
> diff --git a/drivers/ata/parport/Makefile b/drivers/ata/parport/Makefile
> new file mode 100644
> index 000000000000..3ec4a4a66e26
> --- /dev/null
> +++ b/drivers/ata/parport/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_PATA_PARPORT)		+= pata_parport.o
> diff --git a/drivers/ata/parport/pata_parport.c b/drivers/ata/parport/pata_parport.c
> new file mode 100644
> index 000000000000..3ea8d824091e
> --- /dev/null
> +++ b/drivers/ata/parport/pata_parport.c
> @@ -0,0 +1,805 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/parport.h>
> +#include "pata_parport.h"
> +
> +#define DRV_NAME "pata_parport"
> +
> +static DEFINE_IDR(parport_list);
> +static DEFINE_IDR(protocols);
> +static DEFINE_IDA(pata_parport_bus_dev_ids);
> +static DEFINE_MUTEX(pi_mutex);
> +
> +static bool probe = true;
> +module_param(probe, bool, 0644);
> +MODULE_PARM_DESC(probe, "Enable automatic device probing (0=off, 1=on [default])");
> +
> +static bool verbose;
> +module_param(verbose, bool, 0644);
> +MODULE_PARM_DESC(verbose, "Enable verbose messages (0=off [default], 1=on)");
> +
> +#define DISCONNECT_TIMEOUT	(HZ / 10)
> +
> +static void pi_connect(struct pi_adapter *pi)
> +{
> +	del_timer_sync(&pi->timer);
> +	if (!pi->claimed) {
> +		pi->claimed = true;
> +		parport_claim_or_block(pi->pardev);
> +		pi->proto->connect(pi);
> +	}
> +}
> +
> +static void pi_disconnect_timer(struct timer_list *t)
> +{
> +	struct pi_adapter *pi = from_timer(pi, t, timer);
> +
> +	if (pi->claimed) {
> +		pi->proto->disconnect(pi);
> +		parport_release(pi->pardev);
> +		pi->claimed = false;
> +	}
> +}
> +
> +/* functions taken from libata-sff.c and converted from direct port I/O */
> +static void pata_parport_dev_select(struct ata_port *ap, unsigned int device)
> +{
> +	struct pi_adapter *pi = ap->host->private_data;
> +	u8 tmp;
> +
> +	if (device == 0)
> +		tmp = ATA_DEVICE_OBS;
> +	else
> +		tmp = ATA_DEVICE_OBS | ATA_DEV1;
> +
> +	pi_connect(pi);
> +	pi->proto->write_regr(pi, 0, ATA_REG_DEVICE, tmp);
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +	ata_sff_pause(ap);
> +}
> +
> +static bool pata_parport_devchk(struct ata_port *ap, unsigned int device)
> +{
> +	struct pi_adapter *pi = ap->host->private_data;
> +	u8 nsect, lbal;
> +
> +	pata_parport_dev_select(ap, device);
> +
> +	pi_connect(pi);
> +	pi->proto->write_regr(pi, 0, ATA_REG_NSECT, 0x55);
> +	pi->proto->write_regr(pi, 0, ATA_REG_LBAL, 0xaa);
> +
> +	pi->proto->write_regr(pi, 0, ATA_REG_NSECT, 0xaa);
> +	pi->proto->write_regr(pi, 0, ATA_REG_LBAL, 0x55);
> +
> +	pi->proto->write_regr(pi, 0, ATA_REG_NSECT, 055);
> +	pi->proto->write_regr(pi, 0, ATA_REG_LBAL, 0xaa);
> +
> +	nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT);
> +	lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL);
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +
> +	if ((nsect == 0x55) && (lbal == 0xaa))
> +		return true;	/* we found a device */
> +
> +	return false;		/* nothing found */
> +}
> +
> +static int pata_parport_bus_softreset(struct ata_port *ap, unsigned int devmask,
> +				      unsigned long deadline)
> +{
> +	struct pi_adapter *pi = ap->host->private_data;
> +
> +	pi_connect(pi);
> +	/* software reset.  causes dev0 to be selected */
> +	pi->proto->write_regr(pi, 1, 6, ap->ctl);
> +	udelay(20);
> +	pi->proto->write_regr(pi, 1, 6, ap->ctl | ATA_SRST);
> +	udelay(20);
> +	pi->proto->write_regr(pi, 1, 6, ap->ctl);
> +	ap->last_ctl = ap->ctl;
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +
> +	/* wait the port to become ready */
> +	return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
> +}
> +
> +static int pata_parport_softreset(struct ata_link *link, unsigned int *classes,
> +				  unsigned long deadline)
> +{
> +	struct ata_port *ap = link->ap;
> +	unsigned int devmask = 0;
> +	int rc;
> +	u8 err;
> +
> +	/* determine if device 0/1 are present */
> +	if (pata_parport_devchk(ap, 0))
> +		devmask |= (1 << 0);
> +	if (pata_parport_devchk(ap, 1))
> +		devmask |= (1 << 1);
> +
> +	/* select device 0 again */
> +	pata_parport_dev_select(ap, 0);
> +
> +	/* issue bus reset */
> +	rc = pata_parport_bus_softreset(ap, devmask, deadline);
> +	if (rc && rc != -ENODEV) {
> +		ata_link_err(link, "SRST failed (errno=%d)\n", rc);
> +		return rc;
> +	}
> +
> +	/* determine by signature whether we have ATA or ATAPI devices */
> +	classes[0] = ata_sff_dev_classify(&link->device[0],
> +					  devmask & (1 << 0), &err);
> +	if (err != 0x81)
> +		classes[1] = ata_sff_dev_classify(&link->device[1],
> +						  devmask & (1 << 1), &err);
> +
> +	return 0;
> +}
> +
> +static u8 pata_parport_check_status(struct ata_port *ap)
> +{
> +	u8 status;
> +	struct pi_adapter *pi = ap->host->private_data;
> +
> +	pi_connect(pi);
> +	status = pi->proto->read_regr(pi, 0, ATA_REG_STATUS);
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +
> +	return status;
> +}
> +
> +static u8 pata_parport_check_altstatus(struct ata_port *ap)
> +{
> +	u8 altstatus;
> +	struct pi_adapter *pi = ap->host->private_data;
> +
> +	pi_connect(pi);
> +	altstatus = pi->proto->read_regr(pi, 1, 6);
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +
> +	return altstatus;
> +}
> +
> +static void pata_parport_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
> +{
> +	struct pi_adapter *pi = ap->host->private_data;
> +
> +	pi_connect(pi);
> +	if (tf->ctl != ap->last_ctl) {
> +		pi->proto->write_regr(pi, 1, 6, tf->ctl);
> +		ap->last_ctl = tf->ctl;
> +		ata_wait_idle(ap);
> +	}
> +
> +	if (tf->flags & ATA_TFLAG_ISADDR) {
> +		if (tf->flags & ATA_TFLAG_LBA48) {
> +			pi->proto->write_regr(pi, 0, ATA_REG_FEATURE, tf->hob_feature);
> +			pi->proto->write_regr(pi, 0, ATA_REG_NSECT, tf->hob_nsect);
> +			pi->proto->write_regr(pi, 0, ATA_REG_LBAL, tf->hob_lbal);
> +			pi->proto->write_regr(pi, 0, ATA_REG_LBAM, tf->hob_lbam);
> +			pi->proto->write_regr(pi, 0, ATA_REG_LBAH, tf->hob_lbah);
> +		}
> +		pi->proto->write_regr(pi, 0, ATA_REG_FEATURE, tf->feature);
> +		pi->proto->write_regr(pi, 0, ATA_REG_NSECT, tf->nsect);
> +		pi->proto->write_regr(pi, 0, ATA_REG_LBAL, tf->lbal);
> +		pi->proto->write_regr(pi, 0, ATA_REG_LBAM, tf->lbam);
> +		pi->proto->write_regr(pi, 0, ATA_REG_LBAH, tf->lbah);
> +	}
> +
> +	if (tf->flags & ATA_TFLAG_DEVICE)
> +		pi->proto->write_regr(pi, 0, ATA_REG_DEVICE, tf->device);
> +
> +	ata_wait_idle(ap);
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +}
> +
> +static void pata_parport_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
> +{
> +	struct pi_adapter *pi = ap->host->private_data;
> +
> +	pi_connect(pi);
> +	tf->status = pi->proto->read_regr(pi, 0, ATA_REG_STATUS);
> +	tf->error = pi->proto->read_regr(pi, 0, ATA_REG_ERR);
> +	tf->nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT);
> +	tf->lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL);
> +	tf->lbam = pi->proto->read_regr(pi, 0, ATA_REG_LBAM);
> +	tf->lbah = pi->proto->read_regr(pi, 0, ATA_REG_LBAH);
> +	tf->device = pi->proto->read_regr(pi, 0, ATA_REG_DEVICE);
> +
> +	if (tf->flags & ATA_TFLAG_LBA48) {
> +		pi->proto->write_regr(pi, 1, 6, tf->ctl | ATA_HOB);
> +		tf->hob_feature = pi->proto->read_regr(pi, 0, ATA_REG_ERR);
> +		tf->hob_nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT);
> +		tf->hob_lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL);
> +		tf->hob_lbam = pi->proto->read_regr(pi, 0, ATA_REG_LBAM);
> +		tf->hob_lbah = pi->proto->read_regr(pi, 0, ATA_REG_LBAH);
> +		pi->proto->write_regr(pi, 1, 6, tf->ctl);
> +		ap->last_ctl = tf->ctl;
> +	}
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +}
> +
> +static void pata_parport_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
> +{
> +	struct pi_adapter *pi = ap->host->private_data;
> +
> +	pi_connect(pi);
> +	pi->proto->write_regr(pi, 0, ATA_REG_CMD, tf->command);
> +	ata_sff_pause(ap);
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +}
> +
> +static unsigned int pata_parport_data_xfer(struct ata_queued_cmd *qc, unsigned char *buf,
> +					   unsigned int buflen, int rw)
> +{
> +	struct ata_port *ap = qc->dev->link->ap;
> +	struct pi_adapter *pi = ap->host->private_data;
> +
> +	pi_connect(pi);
> +	if (rw == READ)
> +		pi->proto->read_block(pi, buf, buflen);
> +	else
> +		pi->proto->write_block(pi, buf, buflen);
> +	mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +
> +	return buflen;
> +}
> +
> +static void pata_parport_drain_fifo(struct ata_queued_cmd *qc)
> +{
> +	int count;
> +	struct ata_port *ap;
> +	struct pi_adapter *pi;
> +	char junk[2];
> +
> +	/* We only need to flush incoming data when a command was running */
> +	if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
> +		return;
> +
> +	ap = qc->ap;
> +	pi = ap->host->private_data;
> +	/* Drain up to 64K of data before we give up this recovery method */
> +	for (count = 0; (pata_parport_check_status(ap) & ATA_DRQ)
> +						&& count < 65536; count += 2) {
> +		pi_connect(pi);
> +		pi->proto->read_block(pi, junk, 2);
> +		mod_timer(&pi->timer, jiffies + DISCONNECT_TIMEOUT);
> +	}
> +
> +	if (count)
> +		ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count);
> +}
> +
> +static void pata_parport_lost_interrupt(struct ata_port *ap)
> +{
> +	u8 status;
> +	struct ata_queued_cmd *qc;
> +
> +	/* Only one outstanding command per SFF channel */
> +	qc = ata_qc_from_tag(ap, ap->link.active_tag);
> +	/* We cannot lose an interrupt on a non-existent or polled command */
> +	if (!qc || qc->tf.flags & ATA_TFLAG_POLLING)
> +		return;
> +	/*
> +	 * See if the controller thinks it is still busy - if so the command
> +	 * isn't a lost IRQ but is still in progress
> +	 */
> +	status = pata_parport_check_altstatus(ap);
> +	if (status & ATA_BUSY)
> +		return;
> +
> +	/*
> +	 * There was a command running, we are no longer busy and we have
> +	 * no interrupt.
> +	 */
> +	ata_port_warn(ap, "lost interrupt (Status 0x%x)\n", status);
> +	/* Run the host interrupt logic as if the interrupt had not been lost */
> +	ata_sff_port_intr(ap, qc);
> +}
> +
> +static struct ata_port_operations pata_parport_port_ops = {
> +	.inherits		= &ata_sff_port_ops,
> +
> +	.softreset		= pata_parport_softreset,
> +	.hardreset		= NULL,
> +
> +	.sff_dev_select		= pata_parport_dev_select,
> +	.sff_check_status	= pata_parport_check_status,
> +	.sff_check_altstatus	= pata_parport_check_altstatus,
> +	.sff_tf_load		= pata_parport_tf_load,
> +	.sff_tf_read		= pata_parport_tf_read,
> +	.sff_exec_command	= pata_parport_exec_command,
> +	.sff_data_xfer		= pata_parport_data_xfer,
> +	.sff_drain_fifo		= pata_parport_drain_fifo,
> +
> +	.lost_interrupt		= pata_parport_lost_interrupt,
> +};
> +
> +static const struct ata_port_info pata_parport_port_info = {
> +	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_POLLING,
> +	.pio_mask	= ATA_PIO0,
> +	/* No DMA */
> +	.port_ops	= &pata_parport_port_ops,
> +};
> +
> +static void pi_release(struct pi_adapter *pi)
> +{
> +	parport_unregister_device(pi->pardev);
> +	if (pi->proto->release_proto)
> +		pi->proto->release_proto(pi);
> +	module_put(pi->proto->owner);
> +}
> +
> +static int default_test_proto(struct pi_adapter *pi, char *scratch)
> +{
> +	int j, k;
> +	int e[2] = { 0, 0 };
> +
> +	pi->proto->connect(pi);
> +
> +	for (j = 0; j < 2; j++) {
> +		pi->proto->write_regr(pi, 0, 6, 0xa0 + j * 0x10);
> +		for (k = 0; k < 256; k++) {
> +			pi->proto->write_regr(pi, 0, 2, k ^ 0xaa);
> +			pi->proto->write_regr(pi, 0, 3, k ^ 0x55);
> +			if (pi->proto->read_regr(pi, 0, 2) != (k ^ 0xaa))
> +				e[j]++;
> +		}
> +	}
> +	pi->proto->disconnect(pi);
> +
> +	if (verbose)
> +		dev_info(&pi->dev, "%s: port 0x%x, mode %d, test=(%d,%d)\n",
> +		       pi->proto->name, pi->port,
> +		       pi->mode, e[0], e[1]);
> +
> +	return e[0] && e[1];	/* not here if both > 0 */
> +}
> +
> +static int pi_test_proto(struct pi_adapter *pi, char *scratch)
> +{
> +	int res;
> +
> +	parport_claim_or_block(pi->pardev);
> +	if (pi->proto->test_proto)
> +		res = pi->proto->test_proto(pi, scratch, verbose);
> +	else
> +		res = default_test_proto(pi, scratch);
> +	parport_release(pi->pardev);
> +
> +	return res;
> +}
> +
> +static bool pi_probe_mode(struct pi_adapter *pi, int max, char *scratch)
> +{
> +	int best, range;
> +
> +	if (pi->mode != -1) {
> +		if (pi->mode >= max)
> +			return false;
> +		range = 3;
> +		if (pi->mode >= pi->proto->epp_first)
> +			range = 8;
> +		if (range == 8 && pi->port % 8)
> +			return false;
> +		return !pi_test_proto(pi, scratch);
> +	}
> +	best = -1;
> +	for (pi->mode = 0; pi->mode < max; pi->mode++) {
> +		range = 3;
> +		if (pi->mode >= pi->proto->epp_first)
> +			range = 8;
> +		if (range == 8 && pi->port % 8)
> +			break;
> +		if (!pi_test_proto(pi, scratch))
> +			best = pi->mode;
> +	}
> +	pi->mode = best;
> +	return best > -1;
> +}
> +
> +static bool pi_probe_unit(struct pi_adapter *pi, int unit, char *scratch)
> +{
> +	int max, s, e;
> +
> +	s = unit;
> +	e = s + 1;
> +
> +	if (s == -1) {
> +		s = 0;
> +		e = pi->proto->max_units;
> +	}
> +
> +	if (pi->proto->test_port) {
> +		parport_claim_or_block(pi->pardev);
> +		max = pi->proto->test_port(pi);
> +		parport_release(pi->pardev);
> +	} else {
> +		max = pi->proto->max_mode;
> +	}
> +
> +	if (pi->proto->probe_unit) {
> +		parport_claim_or_block(pi->pardev);
> +		for (pi->unit = s; pi->unit < e; pi->unit++) {
> +			if (pi->proto->probe_unit(pi)) {
> +				parport_release(pi->pardev);
> +				return pi_probe_mode(pi, max, scratch);
> +			}
> +		}
> +		parport_release(pi->pardev);
> +		return false;
> +	}
> +
> +	return pi_probe_mode(pi, max, scratch);
> +}
> +
> +static void pata_parport_dev_release(struct device *dev)
> +{
> +	struct pi_adapter *pi = container_of(dev, struct pi_adapter, dev);
> +
> +	kfree(pi);
> +}
> +
> +static void pata_parport_bus_release(struct device *dev)
> +{
> +	/* nothing to do here but required to avoid warning on device removal */
> +}
> +
> +static struct bus_type pata_parport_bus_type = {
> +	.name = DRV_NAME,
> +};
> +
> +static struct device pata_parport_bus = {
> +	.init_name = DRV_NAME,
> +	.release = pata_parport_bus_release,
> +};
> +
> +/* temporary for old paride protocol modules */
> +static struct scsi_host_template pata_parport_sht = {
> +	PATA_PARPORT_SHT("pata_parport")
> +};
> +
> +static struct pi_adapter *pi_init_one(struct parport *parport,
> +			struct pi_protocol *pr, int mode, int unit, int delay)
> +{
> +	struct pardev_cb par_cb = { };
> +	char scratch[512];
> +	const struct ata_port_info *ppi[] = { &pata_parport_port_info };
> +	struct ata_host *host;
> +	struct pi_adapter *pi;
> +
> +	pi = kzalloc(sizeof(struct pi_adapter), GFP_KERNEL);
> +	if (!pi)
> +		return NULL;
> +
> +	/* set up pi->dev before pi_probe_unit() so it can use dev_printk() */
> +	pi->dev.parent = &pata_parport_bus;
> +	pi->dev.bus = &pata_parport_bus_type;
> +	pi->dev.driver = &pr->driver;
> +	pi->dev.release = pata_parport_dev_release;
> +	pi->dev.id = ida_alloc(&pata_parport_bus_dev_ids, GFP_KERNEL);
> +	if (pi->dev.id < 0)
> +		return NULL; /* pata_parport_dev_release will do kfree(pi) */
> +	dev_set_name(&pi->dev, "pata_parport.%u", pi->dev.id);
> +	if (device_register(&pi->dev)) {
> +		put_device(&pi->dev);
> +		goto out_ida_free;
> +	}
> +
> +	pi->proto = pr;
> +
> +	if (!try_module_get(pi->proto->owner))
> +		goto out_unreg_dev;
> +	if (pi->proto->init_proto && pi->proto->init_proto(pi) < 0)
> +		goto out_module_put;
> +
> +	pi->delay = (delay == -1) ? pi->proto->default_delay : delay;
> +	pi->mode = mode;
> +	pi->port = parport->base;
> +
> +	par_cb.private = pi;
> +	pi->pardev = parport_register_dev_model(parport, dev_name(&pi->dev),
> +						&par_cb, pi->dev.id);
> +	if (!pi->pardev)
> +		goto out_module_put;
> +
> +	if (!pi_probe_unit(pi, unit, scratch)) {
> +		dev_info(&pi->dev, "Adapter not found\n");
> +		goto out_unreg_parport;
> +	}
> +
> +	pi->proto->log_adapter(pi, scratch, verbose);
> +
> +	host = ata_host_alloc_pinfo(&pi->dev, ppi, 1);
> +	if (!host)
> +		goto out_unreg_parport;
> +	dev_set_drvdata(&pi->dev, host);
> +	host->private_data = pi;
> +
> +	ata_port_desc(host->ports[0], "port %s", pi->pardev->port->name);
> +	ata_port_desc(host->ports[0], "protocol %s", pi->proto->name);
> +
> +	timer_setup(&pi->timer, pi_disconnect_timer, 0);
> +
> +	if (ata_host_activate(host, 0, NULL, 0, &pata_parport_sht))
> +		goto out_unreg_parport;
> +
> +	return pi;
> +
> +out_unreg_parport:
> +	parport_unregister_device(pi->pardev);
> +	if (pi->proto->release_proto)
> +		pi->proto->release_proto(pi);
> +out_module_put:
> +	module_put(pi->proto->owner);
> +out_unreg_dev:
> +	device_unregister(&pi->dev);
> +out_ida_free:
> +	ida_free(&pata_parport_bus_dev_ids, pi->dev.id);
> +	return NULL;
> +}
> +
> +int pata_parport_register_driver(struct pi_protocol *pr)
> +{
> +	int error;
> +	struct parport *parport;
> +	int port_num;
> +
> +	pr->driver.bus = &pata_parport_bus_type;
> +	pr->driver.name = pr->name;
> +	error = driver_register(&pr->driver);
> +	if (error)
> +		return error;
> +
> +	mutex_lock(&pi_mutex);
> +	error = idr_alloc(&protocols, pr, 0, 0, GFP_KERNEL);
> +	if (error < 0) {
> +		driver_unregister(&pr->driver);
> +		mutex_unlock(&pi_mutex);
> +		return error;
> +	}
> +
> +	pr_info("pata_parport: protocol %s registered\n", pr->name);
> +
> +	if (probe) {
> +		/* probe all parports using this protocol */
> +		idr_for_each_entry(&parport_list, parport, port_num)
> +			pi_init_one(parport, pr, -1, 0, -1);
> +	}
> +	mutex_unlock(&pi_mutex);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(pata_parport_register_driver);
> +
> +void pata_parport_unregister_driver(struct pi_protocol *pr)
> +{
> +	struct pi_protocol *pr_iter;
> +	int id = -1;
> +
> +	mutex_lock(&pi_mutex);
> +	idr_for_each_entry(&protocols, pr_iter, id) {
> +		if (pr_iter == pr)
> +			break;
> +	}
> +	idr_remove(&protocols, id);
> +	mutex_unlock(&pi_mutex);
> +	driver_unregister(&pr->driver);
> +}
> +EXPORT_SYMBOL(pata_parport_unregister_driver);
> +
> +static ssize_t new_device_store(struct bus_type *bus, const char *buf, size_t count)
> +{
> +	char port[12] = "auto";
> +	char protocol[8] = "auto";
> +	int mode = -1, unit = -1, delay = -1;
> +	struct pi_protocol *pr, *pr_wanted;
> +	struct device_driver *drv;
> +	struct parport *parport;
> +	int port_num, port_wanted, pr_num;
> +	bool ok = false;
> +
> +	if (sscanf(buf, "%11s %7s %d %d %d",
> +			port, protocol, &mode, &unit, &delay) < 1)
> +		return -EINVAL;
> +
> +	if (sscanf(port, "parport%u", &port_wanted) < 1) {
> +		if (!strcmp(port, "auto")) {
> +			port_wanted = -1;
> +		} else {
> +			pr_err("invalid port name %s\n", port);
> +			return -EINVAL;
> +		}
> +	}
> +
> +	drv = driver_find(protocol, &pata_parport_bus_type);
> +	if (!drv) {
> +		if (!strcmp(protocol, "auto")) {
> +			pr_wanted = NULL;
> +		} else {
> +			pr_err("protocol %s not found\n", protocol);
> +			return -EINVAL;
> +		}
> +	} else {
> +		pr_wanted = container_of(drv, struct pi_protocol, driver);
> +	}
> +
> +	mutex_lock(&pi_mutex);
> +	/* walk all parports */
> +	idr_for_each_entry(&parport_list, parport, port_num) {
> +		if (port_num == port_wanted || port_wanted == -1) {
> +			parport = parport_find_number(port_num);
> +			if (!parport) {
> +				pr_err("no such port %s\n", port);
> +				mutex_unlock(&pi_mutex);
> +				return -ENODEV;
> +			}
> +			/* walk all protocols */
> +			idr_for_each_entry(&protocols, pr, pr_num) {
> +				if (pr == pr_wanted || !pr_wanted)
> +					if (pi_init_one(parport, pr, mode, unit,
> +							delay))
> +						ok = true;
> +			}
> +			parport_put_port(parport);
> +		}
> +	}
> +	mutex_unlock(&pi_mutex);
> +	if (!ok)
> +		return -ENODEV;
> +
> +	return count;
> +}
> +static BUS_ATTR_WO(new_device);
> +
> +static void pi_remove_one(struct device *dev)
> +{
> +	struct ata_host *host = dev_get_drvdata(dev);
> +	struct pi_adapter *pi = host->private_data;
> +
> +	ata_host_detach(host);
> +	del_timer_sync(&pi->timer);
> +	if (pi->claimed) {
> +		pi->proto->disconnect(pi);
> +		parport_release(pi->pardev);
> +	}
> +	pi_release(pi);
> +	device_unregister(dev);
> +	ida_free(&pata_parport_bus_dev_ids, dev->id);
> +	/* pata_parport_dev_release will do kfree(pi) */
> +}
> +
> +static ssize_t delete_device_store(struct bus_type *bus, const char *buf, size_t count)
> +{
> +	struct device *dev;
> +	char device_name[32];
> +
> +	if (sscanf(buf, "%31s", device_name) < 1)
> +		return -EINVAL;
> +
> +	mutex_lock(&pi_mutex);
> +	dev = bus_find_device_by_name(bus, NULL, device_name);
> +	if (!dev) {
> +		mutex_unlock(&pi_mutex);
> +		return -ENODEV;
> +	}
> +
> +	pi_remove_one(dev);
> +	mutex_unlock(&pi_mutex);
> +
> +	return count;
> +}
> +static BUS_ATTR_WO(delete_device);
> +
> +static void pata_parport_attach(struct parport *port)
> +{
> +	struct pi_protocol *pr;
> +	int pr_num, id;
> +
> +	mutex_lock(&pi_mutex);
> +	id = idr_alloc(&parport_list, port, port->number, port->number, GFP_KERNEL);
> +	if (id < 0) {
> +		mutex_unlock(&pi_mutex);
> +		return;
> +	}
> +
> +	if (probe) {
> +		/* probe this port using all protocols */
> +		idr_for_each_entry(&protocols, pr, pr_num)
> +			pi_init_one(port, pr, -1, 0, -1);
> +	}
> +	mutex_unlock(&pi_mutex);
> +}
> +
> +static int pi_remove_port(struct device *dev, void *p)
> +{
> +	struct ata_host *host = dev_get_drvdata(dev);
> +	struct pi_adapter *pi = host->private_data;
> +
> +	if (pi->pardev->port == p)
> +		pi_remove_one(dev);
> +
> +	return 0;
> +}
> +
> +static void pata_parport_detach(struct parport *port)
> +{
> +	mutex_lock(&pi_mutex);
> +	bus_for_each_dev(&pata_parport_bus_type, NULL, port, pi_remove_port);
> +	idr_remove(&parport_list, port->number);
> +	mutex_unlock(&pi_mutex);
> +}
> +
> +static struct parport_driver pata_parport_driver = {
> +	.name = DRV_NAME,
> +	.match_port = pata_parport_attach,
> +	.detach = pata_parport_detach,
> +	.devmodel = true,
> +};
> +
> +static __init int pata_parport_init(void)
> +{
> +	int error;
> +
> +	error = bus_register(&pata_parport_bus_type);
> +	if (error) {
> +		pr_err("failed to register pata_parport bus, error: %d\n", error);
> +		return error;
> +	}
> +
> +	error = device_register(&pata_parport_bus);
> +	if (error) {
> +		pr_err("failed to register pata_parport bus, error: %d\n", error);
> +		goto out_unregister_bus;
> +	}
> +
> +	error = bus_create_file(&pata_parport_bus_type, &bus_attr_new_device);
> +	if (error) {
> +		pr_err("unable to create sysfs file, error: %d\n", error);
> +		goto out_unregister_dev;
> +	}
> +
> +	error = bus_create_file(&pata_parport_bus_type, &bus_attr_delete_device);
> +	if (error) {
> +		pr_err("unable to create sysfs file, error: %d\n", error);
> +		goto out_remove_new;
> +	}
> +
> +	error = parport_register_driver(&pata_parport_driver);
> +	if (error) {
> +		pr_err("unable to register parport driver, error: %d\n", error);
> +		goto out_remove_del;
> +	}
> +
> +	return 0;
> +
> +out_remove_del:
> +	bus_remove_file(&pata_parport_bus_type, &bus_attr_delete_device);
> +out_remove_new:
> +	bus_remove_file(&pata_parport_bus_type, &bus_attr_new_device);
> +out_unregister_dev:
> +	device_unregister(&pata_parport_bus);
> +out_unregister_bus:
> +	bus_unregister(&pata_parport_bus_type);
> +	return error;
> +}
> +
> +static __exit void pata_parport_exit(void)
> +{
> +	parport_unregister_driver(&pata_parport_driver);
> +	bus_remove_file(&pata_parport_bus_type, &bus_attr_new_device);
> +	bus_remove_file(&pata_parport_bus_type, &bus_attr_delete_device);
> +	device_unregister(&pata_parport_bus);
> +	bus_unregister(&pata_parport_bus_type);
> +}
> +
> +MODULE_AUTHOR("Ondrej Zary");
> +MODULE_DESCRIPTION("driver for parallel port ATA adapters");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("paride");
> +
> +module_init(pata_parport_init);
> +module_exit(pata_parport_exit);
> diff --git a/drivers/ata/parport/pata_parport.h b/drivers/ata/parport/pata_parport.h
> new file mode 100644
> index 000000000000..d8d45f8bc742
> --- /dev/null
> +++ b/drivers/ata/parport/pata_parport.h
> @@ -0,0 +1,108 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + *	pata_parport.h	(c) 1997-8  Grant R. Guenther <grant@xxxxxxxxxx>
> + *				    Under the terms of the GPL.
> + *
> + * This file defines the interface for parallell port IDE adapter chip drivers.
> + */
> +
> +#include <linux/libata.h>
> +
> +#define PI_PCD	1	/* dummy for paride protocol modules */
> +
> +struct pi_adapter {
> +	struct device dev;
> +	struct pi_protocol *proto;	/* adapter protocol */
> +	int port;			/* base address of parallel port */
> +	int mode;			/* transfer mode in use */
> +	int delay;			/* adapter delay setting */
> +	int devtype;			/* dummy for paride protocol modules */
> +	char *device;			/* dummy for paride protocol modules */
> +	int unit;			/* unit number for chained adapters */
> +	int saved_r0;			/* saved port state */
> +	int saved_r2;			/* saved port state */
> +	unsigned long private;		/* for protocol module */
> +	struct pardevice *pardev;	/* pointer to pardevice */
> +	bool claimed;			/* parport has already been claimed */
> +	struct timer_list timer;	/* disconnect timer */
> +};
> +
> +typedef struct pi_adapter PIA;	/* for paride protocol modules */
> +
> +/* registers are addressed as (cont,regr)
> + *	cont: 0 for command register file, 1 for control register(s)
> + *	regr: 0-7 for register number.
> + */
> +
> +/* macros and functions exported to the protocol modules */
> +#define delay_p			(pi->delay ? udelay(pi->delay) : (void)0)
> +#define out_p(offs, byte)	do { outb(byte, pi->port + offs); delay_p; } while (0)
> +#define in_p(offs)		(delay_p, inb(pi->port + offs))
> +
> +#define w0(byte)		out_p(0, byte)
> +#define r0()			(in_p(0) & 0xff)
> +#define w1(byte)		out_p(1, byte)
> +#define r1()			(in_p(1) & 0xff)
> +#define w2(byte)		out_p(2, byte)
> +#define r2()			(in_p(2) & 0xff)
> +#define w3(byte)		out_p(3, byte)
> +#define w4(byte)		out_p(4, byte)
> +#define r4()			(in_p(4) & 0xff)
> +#define w4w(data)		do { outw(data, pi->port + 4); delay_p; } while (0)
> +#define w4l(data)		do { outl(data, pi->port + 4); delay_p; } while (0)
> +#define r4w()			(delay_p, inw(pi->port + 4) & 0xffff)
> +#define r4l()			(delay_p, inl(pi->port + 4) & 0xffffffff)
> +
> +static inline u16 pi_swab16(char *b, int k)
> +{
> +	union { u16 u; char t[2]; } r;
> +
> +	r.t[0] = b[2 * k + 1]; r.t[1] = b[2 * k];
> +	return r.u;
> +}
> +
> +static inline u32 pi_swab32(char *b, int k)
> +{
> +	union { u32 u; char f[4]; } r;
> +
> +	r.f[0] = b[4 * k + 1]; r.f[1] = b[4 * k];
> +	r.f[2] = b[4 * k + 3]; r.f[3] = b[4 * k + 2];
> +	return r.u;
> +}
> +
> +struct pi_protocol {
> +	char name[8];
> +
> +	int max_mode;
> +	int epp_first;		/* modes >= this use 8 ports */
> +
> +	int default_delay;
> +	int max_units;		/* max chained units probed for */
> +
> +	void (*write_regr)(struct pi_adapter *pi, int cont, int regr, int val);
> +	int (*read_regr)(struct pi_adapter *pi, int cont, int regr);
> +	void (*write_block)(struct pi_adapter *pi, char *buf, int count);
> +	void (*read_block)(struct pi_adapter *pi, char *buf, int count);
> +
> +	void (*connect)(struct pi_adapter *pi);
> +	void (*disconnect)(struct pi_adapter *pi);
> +
> +	int (*test_port)(struct pi_adapter *pi);
> +	int (*probe_unit)(struct pi_adapter *pi);
> +	int (*test_proto)(struct pi_adapter *pi, char *scratch, int verbose);
> +	void (*log_adapter)(struct pi_adapter *pi, char *scratch, int verbose);
> +
> +	int (*init_proto)(struct pi_adapter *pi);
> +	void (*release_proto)(struct pi_adapter *pi);
> +	struct module *owner;
> +	struct device_driver driver;
> +	struct scsi_host_template sht;
> +};
> +
> +#define PATA_PARPORT_SHT ATA_PIO_SHT
> +
> +int pata_parport_register_driver(struct pi_protocol *pr);
> +void pata_parport_unregister_driver(struct pi_protocol *pr);
> +/* defines for old paride protocol modules */
> +#define paride_register pata_parport_register_driver
> +#define paride_unregister pata_parport_unregister_driver
> diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
> index a295634597ba..01e4ef3655c1 100644
> --- a/drivers/block/paride/Kconfig
> +++ b/drivers/block/paride/Kconfig
> @@ -92,11 +92,11 @@ config PARIDE_PG
>  	  later fully support this driver.
>  
>  comment "Parallel IDE protocol modules"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  
>  config PARIDE_ATEN
>  	tristate "ATEN EH-100 protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the ATEN EH-100 parallel port IDE
>  	  protocol. This protocol is used in some inexpensive low performance
> @@ -109,7 +109,7 @@ config PARIDE_ATEN
>  
>  config PARIDE_BPCK
>  	tristate "MicroSolutions backpack (Series 5) protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the Micro Solutions BACKPACK
>  	  parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
> @@ -127,7 +127,7 @@ config PARIDE_BPCK
>  
>  config PARIDE_BPCK6
>  	tristate "MicroSolutions backpack (Series 6) protocol"
> -	depends on PARIDE && !64BIT
> +	depends on (PARIDE || PATA_PARPORT) && !64BIT
>  	help
>  	  This option enables support for the Micro Solutions BACKPACK
>  	  parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
> @@ -146,7 +146,7 @@ config PARIDE_BPCK6
>  
>  config PARIDE_COMM
>  	tristate "DataStor Commuter protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the Commuter parallel port IDE
>  	  protocol from DataStor. If you chose to build PARIDE support
> @@ -157,7 +157,7 @@ config PARIDE_COMM
>  
>  config PARIDE_DSTR
>  	tristate "DataStor EP-2000 protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the EP-2000 parallel port IDE
>  	  protocol from DataStor. If you chose to build PARIDE support
> @@ -168,7 +168,7 @@ config PARIDE_DSTR
>  
>  config PARIDE_FIT2
>  	tristate "FIT TD-2000 protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the TD-2000 parallel port IDE
>  	  protocol from Fidelity International Technology. This is a simple
> @@ -181,7 +181,7 @@ config PARIDE_FIT2
>  
>  config PARIDE_FIT3
>  	tristate "FIT TD-3000 protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the TD-3000 parallel port IDE
>  	  protocol from Fidelity International Technology. This protocol is
> @@ -194,7 +194,7 @@ config PARIDE_FIT3
>  
>  config PARIDE_EPAT
>  	tristate "Shuttle EPAT/EPEZ protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the EPAT parallel port IDE protocol.
>  	  EPAT is a parallel port IDE adapter manufactured by Shuttle
> @@ -216,7 +216,7 @@ config PARIDE_EPATC8
>  
>  config PARIDE_EPIA
>  	tristate "Shuttle EPIA protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the (obsolete) EPIA parallel port
>  	  IDE protocol from Shuttle Technology. This adapter can still be
> @@ -228,7 +228,7 @@ config PARIDE_EPIA
>  
>  config PARIDE_FRIQ
>  	tristate "Freecom IQ ASIC-2 protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for version 2 of the Freecom IQ parallel
>  	  port IDE adapter.  This adapter is used by the Maxell Superdisk
> @@ -240,7 +240,7 @@ config PARIDE_FRIQ
>  
>  config PARIDE_FRPW
>  	tristate "FreeCom power protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the Freecom power parallel port IDE
>  	  protocol. If you chose to build PARIDE support into your kernel, you
> @@ -251,7 +251,7 @@ config PARIDE_FRPW
>  
>  config PARIDE_KBIC
>  	tristate "KingByte KBIC-951A/971A protocols"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the KBIC-951A and KBIC-971A parallel
>  	  port IDE protocols from KingByte Information Corp. KingByte's
> @@ -264,7 +264,7 @@ config PARIDE_KBIC
>  
>  config PARIDE_KTTI
>  	tristate "KT PHd protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the "PHd" parallel port IDE protocol
>  	  from KT Technology. This is a simple (low speed) adapter that is
> @@ -277,7 +277,7 @@ config PARIDE_KTTI
>  
>  config PARIDE_ON20
>  	tristate "OnSpec 90c20 protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the (obsolete) 90c20 parallel port
>  	  IDE protocol from OnSpec (often marketed under the ValuStore brand
> @@ -289,7 +289,7 @@ config PARIDE_ON20
>  
>  config PARIDE_ON26
>  	tristate "OnSpec 90c26 protocol"
> -	depends on PARIDE
> +	depends on PARIDE || PATA_PARPORT
>  	help
>  	  This option enables support for the 90c26 parallel port IDE protocol
>  	  from OnSpec Electronics (often marketed under the ValuStore brand
> diff --git a/drivers/block/paride/paride.h b/drivers/block/paride/paride.h
> index ddb9e589da7f..f3bd01a9c9ec 100644
> --- a/drivers/block/paride/paride.h
> +++ b/drivers/block/paride/paride.h
> @@ -1,3 +1,7 @@
> +#if IS_ENABLED(CONFIG_PATA_PARPORT)
> +#include "../../ata/parport/pata_parport.h"
> +
> +#else
>  #ifndef __DRIVERS_PARIDE_H__
>  #define __DRIVERS_PARIDE_H__
>  
> @@ -170,3 +174,4 @@ void pi_unregister_driver(void *);
>  
>  #endif /* __DRIVERS_PARIDE_H__ */
>  /* end of paride.h */
> +#endif /* IS_ENABLED(CONFIG_PATA_PARPORT) */


-- 
Damien Le Moal
Western Digital Research




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux