On 2/7/22 15:50, Hannes Reinecke wrote: > On 2/7/22 04:16, Damien Le Moal wrote: >> The concurrent positioning ranges log page 47h is a general purpose log >> page and not a subpage of the indentify device log. Using >> ata_identify_page_supported() to test for concurrent positioning ranges >> support is thus wrong. ata_log_supported() must be used. >> This invalid test created boot problems for several users in the field. >> >> While at it, strengthen the detection for concurrent positioning ranges >> support by limiting the detection to drives implementing a recent ATA >> standard, that is, ACS-4 (major version 11) or later ACS versions. This >> additional condition effectively turns ata_dev_config_cpr() into a nop, >> avoiding problems in the field with older drives. >> >> Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") >> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519 >> Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx> >> --- >> drivers/ata/libata-core.c | 19 ++++++++++--------- >> 1 file changed, 10 insertions(+), 9 deletions(-) >> > Reviewed-by: Hannes Reinecke <hare@xxxxxxx> Thanks, but I sent a v3 with an update to include/linux/ata.h. Review OK on that one ? > > Cheers, > > Hannes -- Damien Le Moal Western Digital Research