Convert pr_XXX() calls to structured logging.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/ata/pata_hpt3x2n.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 48eef338e050..1d9d4eec5b8a 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -15,9 +15,6 @@
* TODO
* Work out best PLL policy
*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -420,7 +417,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
u16 sr;
u32 total = 0;
- pr_warn("BIOS clock data not set\n");
+ dev_warn(&pdev->dev, "BIOS clock data not set\n");
/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
@@ -530,7 +527,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
ppi[0] = &info_hpt372n;
break;
default:
- pr_err("PCI table is bogus, please report (%d)\n", dev->device);
+ dev_err(&dev->dev,"PCI table is bogus, please report (%d)\n",
+ dev->device);
return -ENODEV;
}
@@ -579,11 +577,11 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
}
if (adjust == 8) {
- pr_err("DPLL did not stabilize!\n");
+ dev_err(&dev->dev, "DPLL did not stabilize!\n");
return -ENODEV;
}
- pr_info("bus clock %dMHz, using 66MHz DPLL\n", pci_mhz);
+ dev_info(&dev->dev, "bus clock %dMHz, using 66MHz DPLL\n", pci_mhz);
/*
* Set our private data up. We only need a few flags
--
2.29.2
