Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021/12/09 23:35, Andy Shevchenko wrote:
> Use temporary variable for struct device to make code neater.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

What is this based on ? Is this on top of Hannes series ?

> ---
>  drivers/ata/sata_dwc_460ex.c | 37 ++++++++++++++++++------------------
>  1 file changed, 19 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
> index 513bee589d12..5421f74c0199 100644
> --- a/drivers/ata/sata_dwc_460ex.c
> +++ b/drivers/ata/sata_dwc_460ex.c
> @@ -215,9 +215,10 @@ static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
>  {
>  	struct sata_dwc_device *hsdev = hsdevp->hsdev;
>  	struct dw_dma_slave *dws = &sata_dwc_dma_dws;
> +	struct device *dev = hsdev->dev;
>  	dma_cap_mask_t mask;
>  
> -	dws->dma_dev = hsdev->dev;
> +	dws->dma_dev = dev;
>  
>  	dma_cap_zero(mask);
>  	dma_cap_set(DMA_SLAVE, mask);
> @@ -225,8 +226,7 @@ static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
>  	/* Acquire DMA channel */
>  	hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
>  	if (!hsdevp->chan) {
> -		dev_err(hsdev->dev, "%s: dma channel unavailable\n",
> -			 __func__);
> +		dev_err(dev, "%s: dma channel unavailable\n", __func__);
>  		return -EAGAIN;
>  	}
>  
> @@ -236,19 +236,20 @@ static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
>  static int sata_dwc_dma_init_old(struct platform_device *pdev,
>  				 struct sata_dwc_device *hsdev)
>  {
> -	struct device_node *np = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
>  
> -	hsdev->dma = devm_kzalloc(&pdev->dev, sizeof(*hsdev->dma), GFP_KERNEL);
> +	hsdev->dma = devm_kzalloc(dev, sizeof(*hsdev->dma), GFP_KERNEL);
>  	if (!hsdev->dma)
>  		return -ENOMEM;
>  
> -	hsdev->dma->dev = &pdev->dev;
> +	hsdev->dma->dev = dev;
>  	hsdev->dma->id = pdev->id;
>  
>  	/* Get SATA DMA interrupt number */
>  	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
>  	if (hsdev->dma->irq == NO_IRQ) {
> -		dev_err(&pdev->dev, "no SATA DMA irq\n");
> +		dev_err(dev, "no SATA DMA irq\n");
>  		return -ENODEV;
>  	}
>  
> @@ -1205,6 +1206,8 @@ static const struct ata_port_info sata_dwc_port_info[] = {
>  
>  static int sata_dwc_probe(struct platform_device *ofdev)
>  {
> +	struct device *dev = &ofdev->dev;
> +	struct device_node *np = dev->of_node;
>  	struct sata_dwc_device *hsdev;
>  	u32 idr, versionr;
>  	char *ver = (char *)&versionr;
> @@ -1214,12 +1217,11 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	struct ata_host *host;
>  	struct ata_port_info pi = sata_dwc_port_info[0];
>  	const struct ata_port_info *ppi[] = { &pi, NULL };
> -	struct device_node *np = ofdev->dev.of_node;
>  	struct resource *res;
>  
>  	/* Allocate DWC SATA device */
> -	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
> -	hsdev = devm_kzalloc(&ofdev->dev, sizeof(*hsdev), GFP_KERNEL);
> +	host = ata_host_alloc_pinfo(dev, ppi, SATA_DWC_MAX_PORTS);
> +	hsdev = devm_kzalloc(dev, sizeof(*hsdev), GFP_KERNEL);
>  	if (!host || !hsdev)
>  		return -ENOMEM;
>  
> @@ -1229,7 +1231,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	base = devm_platform_get_and_ioremap_resource(ofdev, 0, &res);
>  	if (IS_ERR(base))
>  		return PTR_ERR(base);
> -	dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
> +	dev_dbg(dev, "ioremap done for SATA register address\n");
>  
>  	/* Synopsys DWC SATA specific Registers */
>  	hsdev->sata_dwc_regs = base + SATA_DWC_REG_OFFSET;
> @@ -1243,11 +1245,10 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	/* Read the ID and Version Registers */
>  	idr = sata_dwc_readl(&hsdev->sata_dwc_regs->idr);
>  	versionr = sata_dwc_readl(&hsdev->sata_dwc_regs->versionr);
> -	dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
> -		   idr, ver[0], ver[1], ver[2]);
> +	dev_notice(dev, "id %d, controller version %c.%c%c\n", idr, ver[0], ver[1], ver[2]);
>  
>  	/* Save dev for later use in dev_xxx() routines */
> -	hsdev->dev = &ofdev->dev;
> +	hsdev->dev = dev;
>  
>  	/* Enable SATA Interrupts */
>  	sata_dwc_enable_interrupts(hsdev);
> @@ -1255,7 +1256,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	/* Get SATA interrupt number */
>  	irq = irq_of_parse_and_map(np, 0);
>  	if (irq == NO_IRQ) {
> -		dev_err(&ofdev->dev, "no SATA DMA irq\n");
> +		dev_err(dev, "no SATA DMA irq\n");
>  		return -ENODEV;
>  	}
>  
> @@ -1267,7 +1268,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	}
>  #endif
>  
> -	hsdev->phy = devm_phy_optional_get(hsdev->dev, "sata-phy");
> +	hsdev->phy = devm_phy_optional_get(dev, "sata-phy");
>  	if (IS_ERR(hsdev->phy))
>  		return PTR_ERR(hsdev->phy);
>  
> @@ -1282,7 +1283,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	 */
>  	err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
>  	if (err)
> -		dev_err(&ofdev->dev, "failed to activate host");
> +		dev_err(dev, "failed to activate host");
>  
>  	return 0;
>  
> @@ -1306,7 +1307,7 @@ static int sata_dwc_remove(struct platform_device *ofdev)
>  	sata_dwc_dma_exit_old(hsdev);
>  #endif
>  
> -	dev_dbg(&ofdev->dev, "done\n");
> +	dev_dbg(dev, "done\n");
>  	return 0;
>  }
>  


-- 
Damien Le Moal
Western Digital Research



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux