There is no error message with vanilla 5.15.2 + this patch. Warning message about missing support for ATA Identify Device Log instead. Seems well. Relevant dmesg part: ata1: SATA max UDMA/133 abar m2048@0xd8806000 port 0xd8806100 irq 19 ata2: SATA max UDMA/133 abar m2048@0xd8806000 port 0xd8806180 irq 19 ata3: DUMMY ata4: DUMMY ata5: DUMMY ata6: SATA max UDMA/133 abar m2048@0xd8806000 port 0xd8806380 irq 19 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata6.00: ATA-9: WDC WD5000LPLX-75ZNTT0, 03.01A03, max UDMA/133 ata6.00: ATA Identify Device Log not supported ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA ata1.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TM02, max UDMA/100 ata6.00: ATA Identify Device Log not supported ata6.00: configured for UDMA/133 ata1.00: configured for UDMA/100 scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TM02 PQ: 0 ANSI: 5 scsi 5:0:0:0: Direct-Access ATA WDC WD5000LPLX-7 1A03 PQ: 0 ANSI: 5
