Hi,
>> +- interrupt-parent : Interrupt controller.
>
> I don't think that's strictly required.
Okay, got rip of it.
>> +Optional properties:
>> +- status : Shall be "ok" if enabled or "na" if disabled.
>> + Default is "ok".
>
> Why not use the more standard "disabled" string, as I asked you to
> previously?
Missed this one. Fixed.
>> + sata2: sata@1a400000 {
>> + compatible = "apm,xgene-ahci-sgmii";
>> + reg = <0x0 0x1a400000 0x0 0x1000>,
>> + <0x0 0x1f220000 0x0 0x10000>;
>> + interrupt-parent = <&gic>;
>> + interrupts = <0x0 0x87 0x4>;
>> + status = "ok";
>> + clocks = <&sata23clk 0>;
>> + phys = <&phy2 0>;
>> + phy-names = "sata-6g";
>> + };
>> +
>> + sata3: sata@1a800000 {
>> + compatible = "apm,xgene-ahci-pcie";
>> + reg = <0x0 0x1a800000 0x0 0x1000>,
>> + <0x0 0x1f230000 0x0 0x10000>;
>> + interrupt-parent = <&gic>;
>> + interrupts = <0x0 0x88 0x4>;
>> + status = "ok";
>> + clocks = <&sata45clk 0>;
>> + phys = <&phy3 0>;
>> + phy-names = "sata-6g";
>> + };
>
> The example is pointlessly huge. You could trim it down two these last
> two nodes (with a phy node and some fixed clocks).
I will use dummy fixed clock and added two PHY nodes.
-Loc
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
