Andrew, wrt merging... On Thu, Dec 05, 2013 at 05:50:59PM +0100, Andrew Lunn wrote: > This second version addresses most of the points raised during review. > > What has not been changed is the phy-names property. This is awaiting > feedback on my comment that the naming follows how clocks are named in > the driver & DT binding. For this reason i've also not added the > Ack-by: received in the review comments. > > Andrew Lunn (4): > Phy: DT binding documentation for Marvell MVEBU SATA phy. > Phy: Add a PHY driver for Marvell MVEBU SATA PHY. > SATA: MV: Add support for the optional PHYs > Phy: Add DT nodes on kirkwood and Dove for the SATA PHY > This is actually really easy. > Documentation/devicetree/bindings/ata/marvell.txt | 6 + > .../devicetree/bindings/phy/phy-mvebu.txt | 22 ++++ Keep this with the phy driver patch. > arch/arm/boot/dts/dove.dtsi | 11 ++ > arch/arm/boot/dts/kirkwood-6281.dtsi | 2 + > arch/arm/boot/dts/kirkwood-6282.dtsi | 2 + > arch/arm/boot/dts/kirkwood.dtsi | 18 +++ I'll take this. > drivers/ata/sata_mv.c | 19 +++ This uses the phy if it's available, so this can go through ata. No dependency problems there. > drivers/phy/Kconfig | 6 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-mvebu-sata.c | 137 +++++++++++++++++++++ And this can go through Kishon with the binding docs. thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
