This second version addresses most of the points raised during review. What has not been changed is the phy-names property. This is awaiting feedback on my comment that the naming follows how clocks are named in the driver & DT binding. For this reason i've also not added the Ack-by: received in the review comments. Andrew Lunn (4): Phy: DT binding documentation for Marvell MVEBU SATA phy. Phy: Add a PHY driver for Marvell MVEBU SATA PHY. SATA: MV: Add support for the optional PHYs Phy: Add DT nodes on kirkwood and Dove for the SATA PHY Documentation/devicetree/bindings/ata/marvell.txt | 6 + .../devicetree/bindings/phy/phy-mvebu.txt | 22 ++++ arch/arm/boot/dts/dove.dtsi | 11 ++ arch/arm/boot/dts/kirkwood-6281.dtsi | 2 + arch/arm/boot/dts/kirkwood-6282.dtsi | 2 + arch/arm/boot/dts/kirkwood.dtsi | 18 +++ drivers/ata/sata_mv.c | 19 +++ drivers/phy/Kconfig | 6 + drivers/phy/Makefile | 1 + drivers/phy/phy-mvebu-sata.c | 137 +++++++++++++++++++++ 10 files changed, 224 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt create mode 100644 drivers/phy/phy-mvebu-sata.c -- 1.8.5 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
