On Wed, Oct 16, 2013 at 04:06:01PM +0400, Valentine Barshak wrote:
> R-Car Gen2 SoCs have a different PHY which is not compatible
> with the older R-Car H1 (R8A7779) version.
> This adds OF/platform device id tables and PHY initialization
> callbacks for the following Gen2 SoCs:
> * R-Car H2: R8A7790;
> * R-Car M2: R8A7791.
>
> PHY initialization method is chosen based on the device id.
> Default PHY settings are applied for Gen2 SoCs, which should
> suit the Gen2 boards available.
>
> The R8A7779 platform code is modified to use "sata-r8a7779"
> device name.
>
> Signed-off-by: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/ata/sata_rcar.txt | 5 +-
> arch/arm/mach-shmobile/clock-r8a7779.c | 2 +-
> arch/arm/mach-shmobile/setup-r8a7779.c | 2 +-
> drivers/ata/sata_rcar.c | 118 ++++++++++++++++++---
Hi Mark, Hi Device-Tree Folks,
I'm wondering if you have had a chance to look over the bindings
aspect of this and the other patch in the series. I believe that
this series addresses all previous review in that regards.
Hi Valentine,
I would like to request that the arch/arm/mach-shmobile/ portion
of this patch be split out into a separate patch. The reason is
that in general it is nicer to apply driver changes separately
to platform changes: for starters they have different maintainers.
And in this case there seems to be no reason not to split the change.
Also, I would like to this chance to pass on part of a discussion
at the ARM Linux Kernel summit which is that when posting a series of
patches please only CC devicetree@xxxxxxxxxxxxxxx on the patches in
the series that relate to device tree. This would not include
to the new patch with only the arch/arm/mach-shmobile/ portions
of this patch. Feel free to post that patch as a separate series
noting its dependencies below '---' accordingly.
> 4 files changed, 107 insertions(+), 20 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> index 0719115..d6b20a6 100644
> --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
> +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> @@ -1,7 +1,10 @@
> * Renesas R-Car SATA
>
> Required properties:
> -- compatible : should contain "renesas,sata-r8a7779";
> +- compatible : should contain one of the following:
> + - "renesas,sata-r8a7779" for R-Car H1
> + - "renesas,sata-r8a7790" for R-Car H2
> + - "renesas,sata-r8a7791" for R-Car M2
> - reg : offset and length of the SATA registers;
> - interrupts : must consist of one interrupt specifier.
>
> diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
> index 5c83259..b2f8417 100644
> --- a/arch/arm/mach-shmobile/clock-r8a7779.c
> +++ b/arch/arm/mach-shmobile/clock-r8a7779.c
> @@ -170,7 +170,7 @@ static struct clk_lookup lookups[] = {
> /* MSTP32 clocks */
> CLKDEV_DEV_ID("r8a7779-vin.3", &mstp_clks[MSTP120]), /* VIN3 */
> CLKDEV_DEV_ID("rcar-pcie", &mstp_clks[MSTP116]), /* PCIe */
> - CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
> + CLKDEV_DEV_ID("sata-r8a7779", &mstp_clks[MSTP115]), /* SATA */
> CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */
> CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
> CLKDEV_DEV_ID("r8a7779-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
> diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
> index 51a43c5..9d49090 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7779.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7779.c
> @@ -438,7 +438,7 @@ static struct resource sata_resources[] = {
> };
>
> static struct platform_device sata_device = {
> - .name = "sata_rcar",
> + .name = "sata-r8a7779",
> .id = -1,
> .resource = sata_resources,
> .num_resources = ARRAY_SIZE(sata_resources),
> diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
> index a625cc5..068d5b4 100644
> --- a/drivers/ata/sata_rcar.c
> +++ b/drivers/ata/sata_rcar.c
> @@ -15,6 +15,7 @@
> #include <linux/module.h>
> #include <linux/ata.h>
> #include <linux/libata.h>
> +#include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> #include <linux/err.h>
> @@ -123,12 +124,37 @@
>
> #define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
>
> +/* Gen2 Physical Layer Control Registers */
> +#define RCAR_GEN2_PHY_CTL1_REG 0x1704
> +#define RCAR_GEN2_PHY_CTL1 0x34180002
> +#define RCAR_GEN2_PHY_CTL1_SS 0xC180 /* Spread Spectrum */
> +
> +#define RCAR_GEN2_PHY_CTL2_REG 0x170C
> +#define RCAR_GEN2_PHY_CTL2 0x00002303
> +
> +#define RCAR_GEN2_PHY_CTL3_REG 0x171C
> +#define RCAR_GEN2_PHY_CTL3 0x000B0194
> +
> +#define RCAR_GEN2_PHY_CTL4_REG 0x1724
> +#define RCAR_GEN2_PHY_CTL4 0x00030994
> +
> +#define RCAR_GEN2_PHY_CTL5_REG 0x1740
> +#define RCAR_GEN2_PHY_CTL5 0x03004001
> +#define RCAR_GEN2_PHY_CTL5_DC BIT(1) /* DC connection */
> +#define RCAR_GEN2_PHY_CTL5_TR BIT(2) /* Termination Resistor */
> +
> +enum sata_rcar_type {
> + RCAR_GEN1_SATA,
> + RCAR_GEN2_SATA,
> +};
> +
> struct sata_rcar_priv {
> void __iomem *base;
> struct clk *clk;
> + enum sata_rcar_type type;
> };
>
> -static void sata_rcar_phy_initialize(struct sata_rcar_priv *priv)
> +static void sata_rcar_gen1_phy_preinit(struct sata_rcar_priv *priv)
> {
> void __iomem *base = priv->base;
>
> @@ -141,8 +167,8 @@ static void sata_rcar_phy_initialize(struct sata_rcar_priv *priv)
> iowrite32(0, base + SATAPHYRESET_REG);
> }
>
> -static void sata_rcar_phy_write(struct sata_rcar_priv *priv, u16 reg, u32 val,
> - int group)
> +static void sata_rcar_gen1_phy_write(struct sata_rcar_priv *priv, u16 reg,
> + u32 val, int group)
> {
> void __iomem *base = priv->base;
> int timeout;
> @@ -170,6 +196,29 @@ static void sata_rcar_phy_write(struct sata_rcar_priv *priv, u16 reg, u32 val,
> iowrite32(0, base + SATAPHYADDR_REG);
> }
>
> +static void sata_rcar_gen1_phy_init(struct sata_rcar_priv *priv)
> +{
> + sata_rcar_gen1_phy_preinit(priv);
> + sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0);
> + sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1);
> + sata_rcar_gen1_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0);
> + sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0);
> + sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1);
> + sata_rcar_gen1_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0);
> +}
> +
> +static void sata_rcar_gen2_phy_init(struct sata_rcar_priv *priv)
> +{
> + void __iomem *base = priv->base;
> +
> + iowrite32(RCAR_GEN2_PHY_CTL1, base + RCAR_GEN2_PHY_CTL1_REG);
> + iowrite32(RCAR_GEN2_PHY_CTL2, base + RCAR_GEN2_PHY_CTL2_REG);
> + iowrite32(RCAR_GEN2_PHY_CTL3, base + RCAR_GEN2_PHY_CTL3_REG);
> + iowrite32(RCAR_GEN2_PHY_CTL4, base + RCAR_GEN2_PHY_CTL4_REG);
> + iowrite32(RCAR_GEN2_PHY_CTL5 | RCAR_GEN2_PHY_CTL5_DC |
> + RCAR_GEN2_PHY_CTL5_TR, base + RCAR_GEN2_PHY_CTL5_REG);
> +}
> +
> static void sata_rcar_freeze(struct ata_port *ap)
> {
> struct sata_rcar_priv *priv = ap->host->private_data;
> @@ -738,13 +787,17 @@ static void sata_rcar_init_controller(struct ata_host *host)
> u32 val;
>
> /* reset and setup phy */
> - sata_rcar_phy_initialize(priv);
> - sata_rcar_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0);
> - sata_rcar_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1);
> - sata_rcar_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0);
> - sata_rcar_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0);
> - sata_rcar_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1);
> - sata_rcar_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0);
> + switch (priv->type) {
> + case RCAR_GEN1_SATA:
> + sata_rcar_gen1_phy_init(priv);
> + break;
> + case RCAR_GEN2_SATA:
> + sata_rcar_gen2_phy_init(priv);
> + break;
> + default:
> + dev_warn(host->dev, "SATA phy is not initialized\n");
> + break;
> + }
>
> /* SATA-IP reset state */
> val = ioread32(base + ATAPI_CONTROL1_REG);
> @@ -770,8 +823,39 @@ static void sata_rcar_init_controller(struct ata_host *host)
> iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
> }
>
> +static struct of_device_id sata_rcar_match[] = {
> + /* Deprecated, "renesas,sata-r8a7779" should be used instead. */
> + {
> + .compatible = "renesas,rcar-sata",
> + .data = (void *)RCAR_GEN1_SATA,
> + },
> + {
> + .compatible = "renesas,sata-r8a7779",
> + .data = (void *)RCAR_GEN1_SATA,
> + },
> + {
> + .compatible = "renesas,sata-r8a7790",
> + .data = (void *)RCAR_GEN2_SATA
> + },
> + {
> + .compatible = "renesas,sata-r8a7791",
> + .data = (void *)RCAR_GEN2_SATA
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sata_rcar_match);
> +
> +static const struct platform_device_id sata_rcar_id_table[] = {
> + { "sata-r8a7779", RCAR_GEN1_SATA },
> + { "sata-r8a7790", RCAR_GEN2_SATA },
> + { "sata-r8a7791", RCAR_GEN2_SATA },
> + { },
> +};
> +MODULE_DEVICE_TABLE(platform, sata_rcar_id_table);
> +
> static int sata_rcar_probe(struct platform_device *pdev)
> {
> + const struct of_device_id *of_id;
> struct ata_host *host;
> struct sata_rcar_priv *priv;
> struct resource *mem;
> @@ -787,6 +871,12 @@ static int sata_rcar_probe(struct platform_device *pdev)
> if (!priv)
> return -ENOMEM;
>
> + of_id = of_match_device(sata_rcar_match, &pdev->dev);
> + if (of_id)
> + priv->type = (enum sata_rcar_type)of_id->data;
> + else
> + priv->type = platform_get_device_id(pdev)->driver_data;
> +
> priv->clk = devm_clk_get(&pdev->dev, NULL);
> if (IS_ERR(priv->clk)) {
> dev_err(&pdev->dev, "failed to get access to sata clock\n");
> @@ -892,16 +982,10 @@ static const struct dev_pm_ops sata_rcar_pm_ops = {
> };
> #endif
>
> -static struct of_device_id sata_rcar_match[] = {
> - { .compatible = "renesas,rcar-sata", }, /* Deprecated */
> - { .compatible = "renesas,sata-r8a7779", },
> - {},
> -};
> -MODULE_DEVICE_TABLE(of, sata_rcar_match);
> -
> static struct platform_driver sata_rcar_driver = {
> .probe = sata_rcar_probe,
> .remove = sata_rcar_remove,
> + .id_table = sata_rcar_id_table,
> .driver = {
> .name = DRV_NAME,
> .owner = THIS_MODULE,
> --
> 1.8.3.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
