On Wed, Dec 04, 2013 at 12:10:54PM +0000, oliver@xxxxxxxxxxx wrote: > From: Oliver Schinagl <oliver@xxxxxxxxxxx> > > This patch adds support for the sunxi series of SoC's by allwinner. It > plugs into the ahci-platform framework. > > Note: Currently it uses a somewhat hackish approach that probably needs > a lot more work, but does the same as the IMX SoC's. > > Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx> > --- > .../devicetree/bindings/ata/ahci-sunxi.txt | 24 ++ > drivers/ata/Kconfig | 9 + > drivers/ata/Makefile | 1 + > drivers/ata/ahci_platform.c | 12 + > drivers/ata/ahci_sunxi.c | 305 +++++++++++++++++++++ > 5 files changed, 351 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ata/ahci-sunxi.txt > create mode 100644 drivers/ata/ahci_sunxi.c > > diff --git a/Documentation/devicetree/bindings/ata/ahci-sunxi.txt b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt > new file mode 100644 > index 0000000..0792fa5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt > @@ -0,0 +1,24 @@ > +Allwinner SUNXI AHCI SATA Controller > + > +SATA nodes are defined to describe on-chip Serial ATA controllers. > +Each SATA controller should have its own node. > + > +Required properties: > +- compatible : compatible list, contains "allwinner,sun4i-a10-ahci" - compatible: Should contain "allwinner,sun4i-a10-ahci" > +- reg : <registers mapping> - reg: The offset and length of the MMIO registers. > +- interrupts : <interrupt mapping for AHCI IRQ> - interrupts: An interrupt-specifier for the ACHI interrupt > +- clocks : clocks for ACHI > +- clock-names : clock names for AHCI Please _define_ the set of clock-names you expect. This binding is meaningless without it. If you require clock-names, define the clocks property in terms of it. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
