From: Oliver Schinagl <oliver@xxxxxxxxxxx> This patch adds support for the sunxi series of SoC's by allwinner. It plugs into the ahci-platform framework. Note: Currently it uses a somewhat hackish approach that probably needs a lot more work, but does the same as the IMX SoC's. Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx> --- .../devicetree/bindings/ata/ahci-sunxi.txt | 24 ++ drivers/ata/Kconfig | 9 + drivers/ata/Makefile | 1 + drivers/ata/ahci_platform.c | 12 + drivers/ata/ahci_sunxi.c | 305 +++++++++++++++++++++ 5 files changed, 351 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/ahci-sunxi.txt create mode 100644 drivers/ata/ahci_sunxi.c diff --git a/Documentation/devicetree/bindings/ata/ahci-sunxi.txt b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt new file mode 100644 index 0000000..0792fa5 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt @@ -0,0 +1,24 @@ +Allwinner SUNXI AHCI SATA Controller + +SATA nodes are defined to describe on-chip Serial ATA controllers. +Each SATA controller should have its own node. + +Required properties: +- compatible : compatible list, contains "allwinner,sun4i-a10-ahci" +- reg : <registers mapping> +- interrupts : <interrupt mapping for AHCI IRQ> +- clocks : clocks for ACHI +- clock-names : clock names for AHCI + +Optional properties: +- pwr-supply : regulator to control the power supply GPIO + +Example: + ahci@01c18000 { + compatible = "allwinner,sun4i-a10-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <0 56 1>; + clocks = <&ahb_gates 25>, <&pll6 0>; + clock-names = "ahb_sata", "pll6_sata"; + pwr-supply = <®_ahci_5v>; + }; diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 4e73772..b87e2ba 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -106,6 +106,15 @@ config AHCI_IMX If unsure, say N. +config AHCI_SUNXI + tristate "Allwinner sunxi AHCI SATA support" + depends on SATA_AHCI_PLATFORM && ARCH_SUNXI + help + This option enables support for the Allwinner sunxi SoC's + onboard AHCI SATA. + + If unsure, say N. + config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 46518c6..246050b 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o +obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index f955431..28ff1eb 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -31,6 +31,7 @@ enum ahci_type { AHCI, /* standard platform ahci */ IMX53_AHCI, /* ahci on i.mx53 */ STRICT_AHCI, /* delayed DMA engine start */ + SUNXI_AHCI, /* ahci on sunxi */ }; static struct platform_device_id ahci_devtype[] = { @@ -44,6 +45,9 @@ static struct platform_device_id ahci_devtype[] = { .name = "strict-ahci", .driver_data = STRICT_AHCI, }, { + .name = "sunxi-ahci", + .driver_data = SUNXI_AHCI, + }, { /* sentinel */ } }; @@ -81,6 +85,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_platform_ops, }, + [SUNXI_AHCI] = { + AHCI_HFLAGS (AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | + AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, + }, }; static struct scsi_host_template ahci_platform_sht = { diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c new file mode 100644 index 0000000..982641f --- /dev/null +++ b/drivers/ata/ahci_sunxi.c @@ -0,0 +1,305 @@ +/* + * Allwinner sunxi AHCI SATA platform driver + * Copyright 2013 Olliver Schinagl <oliver@xxxxxxxxxxx> + * + * Based on the AHCI SATA platform driver by Freescale and Allwinner + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Daniel Wang <danielwang@xxxxxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/regulator/consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mod_devicetable.h> +#include <linux/of_device.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/gfp.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/errno.h> +#include <linux/ahci_platform.h> +#include "ahci.h" + +#define DRV_NAME "sunxi-sata" + +#define AHCI_BISTAFR 0x00a0 +#define AHCI_BISTCR 0x00a4 +#define AHCI_BISTFCTR 0x00a8 +#define AHCI_BISTSR 0x00ac +#define AHCI_BISTDECR 0x00b0 +#define AHCI_DIAGNR0 0x00b4 +#define AHCI_DIAGNR1 0x00b8 +#define AHCI_OOBR 0x00bc +#define AHCI_PHYCS0R 0x00c0 +#define AHCI_PHYCS1R 0x00c4 +#define AHCI_PHYCS2R 0x00c8 +#define AHCI_TIMER1MS 0x00e0 +#define AHCI_GPARAM1R 0x00e8 +#define AHCI_GPARAM2R 0x00ec +#define AHCI_PPARAMR 0x00f0 +#define AHCI_TESTR 0x00f4 +#define AHCI_VERSIONR 0x00f8 +#define AHCI_IDR 0x00fc +#define AHCI_RWCR 0x00fc +#define AHCI_P0DMACR 0x0170 +#define AHCI_P0PHYCR 0x0178 +#define AHCI_P0PHYSR 0x017c + +struct sunxi_ahci_data { + struct platform_device *ahci_pdev; + struct regulator *regulator; + struct clk *sata_clk; + struct clk *ahb_clk; +}; + +static void sunxi_clrbits(void __iomem *reg, u32 clr_val) +{ + u32 reg_val; + + reg_val = readl(reg); + reg_val &= ~(clr_val); + writel(reg_val, reg); +} + +static void sunxi_setbits(void __iomem *reg, u32 set_val) +{ + u32 reg_val; + + reg_val = readl(reg); + reg_val |= set_val; + writel(reg_val, reg); +} + +static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val) +{ + u32 reg_val; + + reg_val = readl(reg); + reg_val &= ~(clr_val); + reg_val |= set_val; + writel(reg_val, reg); +} + +static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift) +{ + return (readl(reg) >> shift) & mask; +} + +static int sunxi_ahci_phy_init(struct device *dev, void __iomem *reg_base) +{ + u32 reg_val; + int timeout; + + /* This magic is from the original code */ + writel(0, reg_base + AHCI_RWCR); + mdelay(5); + + sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19)); + sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, + (0x7 << 24), + (0x5 << 24) | BIT(23) | BIT(18)); + sunxi_clrsetbits(reg_base + AHCI_PHYCS1R, + (0x3 << 16) | (0x1f << 8) | (0x3 << 6), + (0x2 << 16) | (0x6 << 8) | (0x2 << 6)); + sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15)); + sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19)); + sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, + (0x7 << 20), (0x3 << 20)); + sunxi_clrsetbits(reg_base + AHCI_PHYCS2R, + (0x1f << 5), (0x19 << 5)); + mdelay(5); + + sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19)); + + timeout = 0x100000; + do { + reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28); + } while (--timeout && (reg_val != 0x2)); + if (!timeout) + dev_err(dev, "PHY power up failed.\n"); + + sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24)); + + timeout = 0x100000; + do { + reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24); + } while (--timeout && reg_val); + if (!timeout) + dev_err(dev, "PHY calibration failed.\n"); + mdelay(15); + + writel(0x7, reg_base + AHCI_RWCR); + + return 0; +} + +static int sunxi_ahci_init(struct device *dev, void __iomem *reg_base) +{ + struct sunxi_ahci_data *ahci_data; + int ret; + + ahci_data = dev_get_drvdata(dev->parent); + + ret = clk_prepare_enable(ahci_data->sata_clk); + if (ret < 0) + return ret; + + ret = clk_prepare_enable(ahci_data->ahb_clk); + if (ret < 0) + return ret; + + ret = regulator_enable(ahci_data->regulator); + if (ret) + return ret; + + return sunxi_ahci_phy_init(dev, reg_base); +} + +static void sunxi_ahci_exit(struct device *dev) +{ + struct sunxi_ahci_data *ahci_data; + + ahci_data = dev_get_drvdata(dev->parent); + + regulator_disable(ahci_data->regulator); + + clk_disable_unprepare(ahci_data->ahb_clk); + clk_disable_unprepare(ahci_data->sata_clk); +} + +static struct ahci_platform_data sunxi_ahci_pdata = { + .init = sunxi_ahci_init, + .exit = sunxi_ahci_exit, +}; + +static int sunxi_ahci_remove(struct platform_device *pdev) +{ + struct sunxi_ahci_data *ahci_data; + + ahci_data = platform_get_drvdata(pdev); + platform_device_unregister(ahci_data->ahci_pdev); + + dev_dbg(&pdev->dev, "driver unloaded\n"); + + return 0; +} + +static const struct of_device_id sunxi_ahci_of_match[] = { + { .compatible = "allwinner,sun4i-a10-ahci", .data = &sunxi_ahci_pdata}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, sunxi_ahci_of_match); + +static int sunxi_ahci_probe(struct platform_device *pdev) +{ + const struct ahci_platform_data *pdata; + const struct of_device_id *of_dev_id; + struct resource *mem, *irq, res[2]; + struct platform_device *ahci_pdev; + struct sunxi_ahci_data *ahci_data; + struct regulator *regulator; + int ret; + + regulator = devm_regulator_get(&pdev->dev, "pwr"); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "no regulator found (%d)\n", ret); + return ret; + } + + ahci_data = devm_kzalloc(&pdev->dev, sizeof(*ahci_data), GFP_KERNEL); + if (!ahci_data) + return -ENOMEM; + + ahci_pdev = platform_device_alloc("sunxi-ahci", -1); + if (!ahci_pdev) + return -ENODEV; + + ahci_pdev->dev.parent = &pdev->dev; + + ahci_data->regulator = regulator; + ahci_data->ahb_clk = devm_clk_get(&pdev->dev, "ahb_sata"); + if (IS_ERR(ahci_data->ahb_clk)) { + ret = PTR_ERR(ahci_data->ahb_clk); + goto err_out; + } + + ahci_data->sata_clk = devm_clk_get(&pdev->dev, "pll6_sata"); + if (IS_ERR(ahci_data->sata_clk)) { + ret = PTR_ERR(ahci_data->sata_clk); + goto err_out; + } + + ahci_data->ahci_pdev = ahci_pdev; + platform_set_drvdata(pdev, ahci_data); + + ahci_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ahci_pdev->dev.dma_mask = &ahci_pdev->dev.coherent_dma_mask; + ahci_pdev->dev.of_node = pdev->dev.of_node; + + of_dev_id = of_match_device(sunxi_ahci_of_match, &pdev->dev); + if (of_dev_id) { + pdata = of_dev_id->data; + } else { + ret = -EINVAL; + goto err_out; + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!mem || !irq) { + ret = -ENOMEM; + goto err_out; + } + res[0] = *mem; + res[1] = *irq; + ret = platform_device_add_resources(ahci_pdev, res, 2); + if (ret) + goto err_out; + + ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata)); + if (ret) + goto err_out; + + ret = platform_device_add(ahci_pdev); + if (ret) + goto err_out; + + return 0; + +err_out: + platform_device_put(ahci_pdev); + return ret; +} + +static struct platform_driver sunxi_ahci_driver = { + .probe = sunxi_ahci_probe, + .remove = sunxi_ahci_remove, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = sunxi_ahci_of_match, + }, +}; +module_platform_driver(sunxi_ahci_driver); + +MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA platform driver"); +MODULE_AUTHOR("Olliver Schinagl <oliver@xxxxxxxxxxx>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("ahci:sunxi"); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html