On Thu, Dec 05, 2013 at 11:33:46AM +0530, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Wednesday 04 December 2013 10:46 PM, Andrew Lunn wrote:
> > Describe the binding for the Marvell MVEBU SATA phy. This driver
> > can be used at least with Kirkwood, Dove and maybe others.
> > Additionally, update the SATA binding with the properties to link
> > to the phy nodes.
> >
> > Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
> > ---
> > Documentation/devicetree/bindings/ata/marvell.txt | 6 ++++++
> > .../devicetree/bindings/phy/phy-mvebu-sata.txt | 22 ++++++++++++++++++++++
> > 2 files changed, 28 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-sata.txt
> >
> > diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
> > index b5cdd20cde9c..e072fa105b49 100644
> > --- a/Documentation/devicetree/bindings/ata/marvell.txt
> > +++ b/Documentation/devicetree/bindings/ata/marvell.txt
> > @@ -6,11 +6,17 @@ Required Properties:
> > - interrupts : Interrupt controller is using
> > - nr-ports : Number of SATA ports in use.
> >
> > +Optional Properties:
> > +- phys : List of phandles to sata phys
> > +- phy-names : Should be "0", "1", etc, one number per phandle
>
> over aligned..
Could you explain please? Here is what it looks like without the patch
formatting, which could be messing up the display of tabs, due to the
+ at the beginning:
Required Properties:
- compatibility : "marvell,orion-sata"
- reg : Address range of controller
- interrupts : Interrupt controller is using
- nr-ports : Number of SATA ports in use.
Optional Properties:
- phys : List of phandles to sata phys
- phy-names : Should be "0", "1", etc, one number per phandle
> > +
> > Example:
> >
> > sata@80000 {
> > compatible = "marvell,orion-sata";
> > reg = <0x80000 0x5000>;
> > interrupts = <21>;
> > + phys = <&sata_phy0>, <&sata_phy1>;
> > + phy-names = "0", "1";
>
> more descriptive phy-names? sata-phy0?
> > nr-ports = <2>;
I could do, but i was following how the clocks work. Unfortunately,
the binding documentation is out of date and does not contain
clocks. A real example is:
sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
phys = <&sata_phy0>, <&sata_phy1>;
phy-names = "0", "1";
status = "disabled";
};
So clocks and the phy are described nearly identically. I can however
handle phys differently if you wish.
I will also submit a separate patch to the binding documentation to
add the clocks.
> > }
> > diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-sata.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-sata.txt
> > new file mode 100644
> > index 000000000000..1cf9cef50b4b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-sata.txt
>
> Just name this mvebu-phy.txt so that we can add bindings of other mvebu PHYs
> here when it's added.
O.K. I also have a pcie phy driver, but it does not work
yet. devm_phy_get() is too restrictive for a complex device like a
PCIe controller.
> > + sata-phy@1 {
>
> The value after '@' must match the first address specified in the reg property
> of the node according to the ePAPR spec.
O.K, will fix.
> > + compatible = "marvell,mvebu-sata-phy";
> > + reg = <0x84000 0x0334>;
> > + clocks = <&gate_clk 15>;
> > + clock-names = "sata";
> > + #phy-cells = <1>;
>
> Is it on purpose that your are having phy-cells value to 1?
Yes. Each instance only controls one phy.
Thanks
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
