Hello, On Tue, Oct 08, 2013 at 05:29:22PM +0800, Richard Zhu wrote: > @@ -1,6 +1,6 @@ > /* > + * copyright (c) 2013 Freescale Semiconductor, Inc. > * Freescale IMX AHCI SATA platform driver > - * Copyright 2013 Freescale Semiconductor, Inc. I don't really mind making small changes along with other changes but would appreciate if you can at least mention the change in the changelog. As it currently stands, I'm not even sure whether the above is an intended change or just something slipped. > +module_param_named(hp, ahci_imx_hp, int, 0644); Can you please spellout "hp" to "hotplug" especially for the name visible outside? It isn't a common abbreviation and it's not like we despearately lose the extra three chars there. > @@ -105,6 +114,39 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio) > reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; > writel(reg_val, mmio + HOST_TIMER1MS); > > + if (ahci_imx_hp == 0) { > + /* > + * hot-plug is not supported. > + * In order to save power consumption, enter PDDQ mode > + * when there is no device detected on the port. > + * NOTE: hot-plug wouldn't supported when PDDQ mode is > + * ever entered. > + */ > + do { > + sstatus = readl(mmio + 0x100 + PORT_SCR_STAT); > + if ((sstatus & 0xF) == 0) > + usleep_range(1000, 2000); > + else > + break; > + > + if (iterations == 0) { > + pr_info("No sata disk.\n"); > + reg_val = readl(mmio + PORT_PHY_CTL); > + writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, > + mmio + PORT_PHY_CTL); > + regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, > + IMX6Q_GPR13_SATA_MPLL_CLK_EN, > + !IMX6Q_GPR13_SATA_MPLL_CLK_EN); > + clk_disable_unprepare(imxpriv->sata_ref_clk); > + imxpriv->no_device = 1; > + > + return 0; > + } > + } while (iterations-- > 0); Hmm... I'm not a big fan of this approach as it essentially is an incomplete implementation of SATA device detection. Wouldn't it be better to override error_handler? ie. implement ahci_imx_error_handler() which wraps ahci_error_handler() and do something like the following, static bool first_time = true; ahci_error_handler(ap); if (!first_time || ahci_imx_hotplug) return; first_time = false; ata_for_each_dev(dev, link, ENABLED) return; DISABLE LINK; Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html