Hi Valentine,
Thank you for the patch. Two small comments below.
On Friday 08 November 2013 00:04:02 Valentine Barshak wrote:
> These bindings can be used to register SATA devices found on R-Car SoC.
>
> Signed-off-by: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
> Acked-by: Kumar Gala <galak@xxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/ata/sata_rcar.txt | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ata/sata_rcar.txt
>
> diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt
> b/Documentation/devicetree/bindings/ata/sata_rcar.txt new file mode 100644
> index 0000000..d6b20a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> @@ -0,0 +1,18 @@
> +* Renesas R-Car SATA
> +
> +Required properties:
> +- compatible : should contain one of the following:
> + - "renesas,sata-r8a7779" for R-Car H1
> + - "renesas,sata-r8a7790" for R-Car H2
> + - "renesas,sata-r8a7791" for R-Car M2
> +- reg : offset and length of the SATA registers;
Maybe address instead of offset ?
> +- interrupts : must consist of one interrupt specifier.
> +
> +Example:
> +
> +sata: sata@fc600000 {
> + compatible = "renesas,sata-r8a7779";
> + reg = <0xfc600000 0x2000>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 100 0x4>;
Please use IRQ_TYPE_LEVEL_HIGH instead of 0x4.
> +};
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
