Tejun Heo wrote:
Hello,
This patchset implements alt_size, which is a size hint to the users
of a block device. It's primarily to communicate the BIOS (HPA) size
on ATA devices to userland, so that dmraid can consider it when trying
to figure out BIOS raid layout. This is critical as dmraid can be
tricked into assemblying the wrong raid when fed with the unlocked
size and if the disk content is right (or, rather, wrong) and good
number of distros are shipping with ignore_hpa=1 as default.
This patch contains the following three patches.
0001-block-add-alt_size.patch
0002-scsi-add-scsi_device-alt_capacity.patch
0003-libata-export-HPA-size-as-alt_size.patch
Without the above three patches, I get the following on my nv RAID-0
if HPA unlocking is turned on.
# ~/work/dmraid/tools/dmraid -a y
RAID set "nvidia_djgdjigi" was activated
# mount /dev/dm-0 /mnt/tmp
mount: wrong fs type, bad option, bad superblock on /dev/dm-0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
With the above three patches and modified dmraid,
ck804:~/os/work/build # ~/work/dmraid/tools/dmraid -a y -v -v -v
...
NOTICE: /dev/sdb: using BIOS sectors 234439535
RAID set "nvidia_djgdjigi" was activated
...
ck804:~/os/work/build # mount /dev/dm-0 /mnt/tmp
ck804:~/os/work/build # umount /dev/dm-0
Any ideas on through which tree this should be pushed? I'll post
dmraid patches as a reply to this thread for reference.
Thanks.
This patchset is against the current linus#master[1] and contains the
following changes.
block/genhd.c | 26 ++++++++++++++++++++++++++
drivers/ata/libata-core.c | 2 ++
drivers/ata/libata-scsi.c | 2 ++
drivers/scsi/sd.c | 1 +
include/linux/genhd.h | 13 ++++++++++++-
include/linux/libata.h | 1 +
include/scsi/scsi_device.h | 1 +
7 files changed, 45 insertions(+), 1 deletion(-)
<shrug> I suppose...
It just seems like a nasty hack, but unfortunately I don't see anyone
stepping up to do it properly -- with a DM device automatically layered
on top that splits the device into separate regions: one block device
for the 'regular' area, and one for the HPA.
Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
