Linux IDE Archive

• Thread Index

• [Bug 13086] New: pata_via can't initialize 2nd HDD on VIA VX800 chipsets (problem in via_tf_load)
  • From: bugzilla-daemon
• [PATCH] sata_sil: enable 32-bit PIO
  • From: Robert Hancock
• [PATCH #upstream-fixes] pata_legacy: fix no device fail path
  • From: Tejun Heo
• Re: Fw: [PATCH] ahci: add ACard 8620 support (rough draft)
  • From: Tejun Heo
• Re: Fw: [PATCH] ahci: add ACard 8620 support (rough draft)
  • From: Jim Yeh
• [PATCH] sata_sx4: speed up ECC initialization
  • From: Alexander Beregalov
• Re: libata errors
  • From: Robert Hancock
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
  • From: Mark Lord
• Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Jeff Garzik
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Jeff Garzik
• [PATCH] libata: use ATA_ID_CFA_*
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Sergei Shtylyov
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Alan Cox
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: sgpio for nvidia mcp55 -v3
  • From: Yinghai Lu
• Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
  • From: Mark Lord
• Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
  • From: Mark Lord
• Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
  • From: Alan Cox
• Re: Implementing NVMHCI...
  • From: James Bottomley
• Re: [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
  • From: Mark Lord
• [PATCH 02/02] sata_mv: workaround for multi_count errata sata24
  • From: Mark Lord
• [PATCH 01/02] sata_mv: tidy up qc->tf usage in qc_prep() functions
  • From: Mark Lord
• Re: Implementing NVMHCI...
  • From: Linus Torvalds
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: James Bottomley
• Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
  • From: Mark Lord
• Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
  • From: saeed bishara
• Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
  • From: Mark Lord
• Re: Fw: [PATCH] ahci: add ACard 8620 support (rough draft)
  • From: Jeff Garzik
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Michael Ellerman
• Re: Implementing NVMHCI...
  • From: Avi Kivity
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: FUJITA Tomonori
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: FUJITA Tomonori
• Re: libata errors
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: libata errors
  • From: Tejun Heo
• Re: v2.6.25: WARNING: at kernel/lockdep.c:2437 __lock_acquire+0xc69/0xfa0()
  • From: Tejun Heo
• Re: [PATCH] sata_sx4: refresh and convert to new EH
  • From: Jeff Garzik
• Re: [PATCH 14/14] ide-cd: use bio for request sense
  • From: Borislav Petkov
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ahci: force CAP_NCQ for earlier NV MCPs
  • From: Jeff Garzik
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: FUJITA Tomonori
• Re: [PATCH] sata_nv: sgpio for nvidia mcp55 -v3
  • From: Jeff Garzik
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Jeff Garzik
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: FUJITA Tomonori
• Re: [PATCH] sata_mv: use new sata phy register settings for new devices
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: use new sata phy register settings for new devices
  • From: saeed bishara
• Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
  • From: saeed bishara
• Re: Implementing NVMHCI...
  • From: Avi Kivity
• Re: [PATCH] sata_sx4: refresh and convert to new EH
  • From: Alexander Beregalov
• Re: Implementing NVMHCI...
  • From: Robert Hancock
• Re: [PATCH 0/3] libahci and friends
  • From: Jeff Garzik
• [PATCH 0/3] libahci and friends
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: Jeff Garzik
• [PATCH 3/3] New 'acard-ahci' driver for Acard ATP8620 support
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: Linus Torvalds
• [PATCH 2/3] mv-ahci: Add PATA support
  • From: Jeff Garzik
• [PATCH 1/3] Create libahci. Move Marvell support to mv-ahci.
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: James Bottomley
• Re: Implementing NVMHCI...
  • From: Linus Torvalds
• Re: Implementing NVMHCI...
  • From: Robert Hancock
• Re: Implementing NVMHCI...
  • From: Avi Kivity
• Re: Implementing NVMHCI...
  • From: Szabolcs Szakacsits
• Re: Implementing NVMHCI...
  • From: Linus Torvalds
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: Alan Cox
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Alan Cox
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Mark Lord
• Re: [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
  • From: Mark Lord
• Re: Implementing NVMHCI...
  • From: Mark Lord
• Re: [PATCH] sata_sx4: refresh and convert to new EH
  • From: Jeff Garzik
• RE: Implementing NVMHCI...
  • From: Leslie Rhorer
• Re: Implementing NVMHCI...
  • From: Linus Torvalds
• Re: [PATCH] sata_sx4: refresh and convert to new EH
  • From: Alexander Beregalov
• Re: Implementing NVMHCI...
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: david
• Re: Implementing NVMHCI...
  • From: Linus Torvalds
• Re: Implementing NVMHCI...
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: Alan Cox
• Re: Implementing NVMHCI...
  • From: Linus Torvalds
• Re: [PATCH] sata_mv: use new sata phy register settings for new devices
  • From: Grant Grundler
• Re: Implementing NVMHCI...
  • From: Grant Grundler
• Re: Implementing NVMHCI...
  • From: John Stoffel
• Re: Implementing NVMHCI...
  • From: John Stoffel
• Re: Implementing NVMHCI...
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: Linus Torvalds
• Re: Implementing NVMHCI...
  • From: Jeff Garzik
• Re: Implementing NVMHCI...
  • From: Alan Cox
• Re: sata_sil & pmp ?
  • From: Robert Hancock
• Re: [PATCH RFC] ahci: implement handoff quirk
  • From: Jeff Garzik
• Re: libata errors
  • From: Robert Hancock
• Re: [PATCH RFC] ahci: implement handoff quirk
  • From: Tejun Heo
• Implementing NVMHCI...
  • From: Jeff Garzik
• Re: [PATCH RFC] ahci: implement handoff quirk
  • From: Jeff Garzik
• Re: v2.6.25: WARNING: at kernel/lockdep.c:2437 __lock_acquire+0xc69/0xfa0()
  • From: Jeff Garzik
• [PATCH] sata_mv: increate the IORDY timeout for the soc controllers
  • From: Martin Michlmayr
• [PATCH] sata_mv: use new sata phy register settings for new devices
  • From: Martin Michlmayr
• RE: Odd RAID failure
  • From: Leslie Rhorer
• [bug#12874] Seagate STT20000A no longer works
  • From: Borislav Petkov
• Re: Odd RAID failure
  • From: Tejun Heo
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• sata_sil & pmp ?
  • From: Hans Holmberg
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• RE: Odd RAID failure
  • From: Leslie Rhorer
• RE: Odd RAID failure
  • From: Leslie Rhorer
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Douglas Gilbert
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• Re: Odd RAID failure
  • From: Tejun Heo
• Re: Odd RAID failure
  • From: Greg Freemyer
• Re: Bug 453808 - qc timeout probing TEAC DV-28E-V CD/DVD drive on SATA/PATA bridge
  • From: Tejun Heo
• Re: [PATCH libata: add SSD detection hueristic; move SSD setup to ata_dev_configure (was Re: [GIT PULL] Ext3 latency fixes)
  • From: Tejun Heo
• Re: Odd RAID failure
  • From: Tejun Heo
• Re: Errors on ICH10R with Seagate HDDs
  • From: Tejun Heo
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Mark Lord
• [PROPOSAL] ata: Report 16/32bit PIO as best we can
  • From: Alan Cox
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Timur Tabi
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Tejun Heo
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Alan Cox
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Tejun Heo
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Tejun Heo
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Tejun Heo
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Alan Cox
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Alan Cox
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Alan Cox
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Mark Lord
• Re: [PATCH 13/14] lemote: fixup for FUJITSU disk
  • From: yanhua
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Alan Cox
• Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Jeff Garzik
• [PATCH] hpt366: use ATA_DMA_* constants
  • From: Sergei Shtylyov
• [PROPOSED] ata: Report 16/32bit PIO as best we can
  • From: Alan Cox
• Re: [PATCH 13/14] lemote: fixup for FUJITSU disk
  • From: Sergei Shtylyov
• Re: 32-bit IO to-do item...
  • From: Jeff Garzik
• Re: 32-bit IO to-do item...
  • From: Alan Cox
• Re: 32-bit IO to-do item...
  • From: Jeff Garzik
• Re: 32-bit IO to-do item...
  • From: Alan Cox
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Jeff Garzik
• 32-bit IO to-do item...
  • From: Jeff Garzik
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Kumar Gala
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Michael Ellerman
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Kumar Gala
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Michael Ellerman
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Timur Tabi
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Tejun Heo
• [PATCH #upstream-fixes] ahci: force CAP_NCQ for earlier NV MCPs
  • From: Tejun Heo
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Timur Tabi
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Tejun Heo
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Timur Tabi
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
  • From: Tejun Heo
• [PATCH] sata_sx4: refresh and convert to new EH
  • From: Jeff Garzik
• Re: [eSATA] 2.6.28.7: IO errors
  • From: Guennadi Liakhovetski
• Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
  • From: Jeff Garzik
• Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
  • From: Dustin Harrison
• Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
  • From: Matthew Wilcox
• Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
  • From: Jeff Garzik
• Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
  • From: Matthew Wilcox
• Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
  • From: Jeff Garzik
• Re: [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
  • From: Matthew Wilcox
• Re: PMPs
  • From: Mikael Abrahamsson
• Re: libata errors
  • From: Matt Grice
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Mark Lord
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Jeff Garzik
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Dongjun Shin
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Mark Lord
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Mark Lord
• Re: libata errors
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Jeff Garzik
• [git pull] IDE updates part 4 (revised)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Sergei Shtylyov
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Timur Tabi
• Re: libata errors
  • From: Mikael Pettersson
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Markus Trippelsdorf
• [PATCH] libata: Prepare for hard drives w/ non-512 sector sizes
  • From: Jeff Garzik
• Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Jeff Garzik
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Jeff Garzik
• [PATCH] ahci: add ACard 8620 support (rough draft)
  • From: Jeff Garzik
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
  • From: Sagar Borikar
• Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
  • From: Jeff Garzik
• Re: [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
  • From: Sagar Borikar
• [PATCH v2] ahci: Add Marvell PATA support
  • From: Jeff Garzik
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Michael Ellerman
• Re: libata errors
  • From: Robert Hancock
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Timur Tabi
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Michael Ellerman
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Timur Tabi
• Re: "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Tejun Heo
• Re: [git pull] IDE updates part 4
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] sata_sil: disable DMA engine in ->freeze
  • From: Jeff Garzik
• [PATCH 1/2] libata EH: freeze port before aborting commands
  • From: Jeff Garzik
• Re: [git pull] IDE updates part 4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata-eh: call freeze hook before port abort
  • From: Tejun Heo
• Re: [git pull] IDE updates part 4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Bartlomiej Zolnierkiewicz
• Re: [git pull] IDE updates part 4
  • From: Jeff Garzik
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Jeff Garzik
• [git pull] IDE updates part 4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Matthew Wilcox
• Re: libata errors
  • From: Jeff Garzik
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] at91_ide: remove unused ide_mm_{outb,inb}
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] at91_ide: remove custom tf_{read|load}() methods (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: PATCH 2/2] at91_ide: turn on PIO 6 support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide-cd: reverse NOT_READY sense key logic
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] libata-eh: call freeze hook before port abort
  • From: Jeff Garzik
• Re: Problems with >3 drives on an eSATA portmultiplier
  • From: Justin Fletcher
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Grant Grundler
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Grant Grundler
• libata errors
  • From: Matt Grice
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Данила Жукоцкий
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Mark Lord
• [PATCH libata: add SSD detection hueristic; move SSD setup to ata_dev_configure (was Re: [GIT PULL] Ext3 latency fixes)
  • From: Jeff Garzik
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Markus Trippelsdorf
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Mark Lord
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Jeff Garzik
• [PATCH] at91_ide: remove custom tf_{read|load}() methods (take 2)
  • From: Sergei Shtylyov
• Fwd: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Данила Жукоцкий
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Grant Grundler
• [PATCH] hpt366: fix HPT370 DMA timeouts
  • From: Sergei Shtylyov
• [PATCH] cs5536: define dma_sff_read_status() method
  • From: Sergei Shtylyov
• "ahci: drop intx manipulation on msi enable" breaks ULI M1575
  • From: Timur Tabi
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Данила Жукоцкий
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Данила Жукоцкий
• Re: can I freeze I/O for some time to a given disk / md / dm
  • From: Tomasz Chmielewski
• Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] at91_ide: remove unused ide_mm_{outb,inb}
  • From: Sergei Shtylyov
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Данила Жукоцкий
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: FUJITA Tomonori
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: FUJITA Tomonori
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Данила Жукоцкий
• Re: [PATCH 2/2] ide-cd: cdrom_decode_status: use return codes instead of naked numbers
  • From: Borislav Petkov
• Re: [PATCH 1/2] ide-cd: reverse NOT_READY sense key logic
  • From: Borislav Petkov
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Данила Жукоцкий
• Re: ata_check_status_mmio exception kernel panic
  • From: Jeff Garzik
• Re: ata_check_status_mmio exception kernel panic
  • From: Jeff Garzik
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: FUJITA Tomonori
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 01/03] sata_mv: revert SoC irq breakage
  • From: Jeff Garzik
• Re: [PATCH v2] libata: ahci enclosure management bios workaround
  • From: Jeff Garzik
• Re: [PATCH 3/5] ata: Add TRIM infrastructure
  • From: Jeff Garzik
• Re: [PATCH] libata: Remove some redundant casts from pata_octeon_cf.c
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ata_piix: VGN-BX297XP wants the controller power up on suspend
  • From: Jeff Garzik
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Alan Cox
• PATCH 2/2] at91_ide: turn on PIO 6 support
  • From: Stanislaw Gruszka
• [PATCH 1/2] at91_ide: remove unused ide_mm_{outb,inb}
  • From: Stanislaw Gruszka
• Re: [PATCH 3/6] ide: move common code out of tf_load() method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide: remove unused #include <linux/version.h>
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/6] ide: simplify 'struct ide_taskfile'
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] ide-cd: cdrom_decode_status: use return codes instead of naked numbers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/5] ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide-cd: reverse NOT_READY sense key logic
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] tx4939ide: Fix tx4939ide_{in,out}put_data_swap argument
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/08] sata_mv: shorten register names
  • From: Mark Lord
• [Bug 13026] cs5536 is broken
  • From: bugzilla-daemon
• Re: [PATCH 1/5] Block: Discard may need to allocate pages
  • From: Matthew Wilcox
• [Bug 13026] New: cs5536 is broken
  • From: bugzilla-daemon
• Re: [PATCH 06/07] sata_mv: cosmetic renames
  • From: Mark Lord
• Re: [PATCH 06/07] sata_mv: cosmetic renames
  • From: Jeff Garzik
• [PATCH 07/07] sata_mv: workaround errata SATA#13
  • From: Mark Lord
• [PATCH 06/07] sata_mv: cosmetic renames
  • From: Mark Lord
• [PATCH 05/07] sata_mv: workaround errata SATA#26
  • From: Mark Lord
• [PATCH 04/07] sata_mv: workaround errata PCI#7
  • From: Mark Lord
• [PATCH 03/03] sata_mv: replace 0x1f with ATA_PIO4 (v2)
  • From: Mark Lord
• Re: 2.6.29.1 BUG: unable to handle kernel NULL pointer dereference at (null)
  • From: Arnd Hannemann
• Re: 2.6.29.1 BUG: unable to handle kernel NULL pointer dereference at (null)
  • From: Sergei Shtylyov
• 2.6.29.1 BUG: unable to handle kernel NULL pointer dereference at (null)
  • From: Arnd Hannemann
• [PATCH] tx4939ide: Fix tx4939ide_{in,out}put_data_swap argument
  • From: Atsushi Nemoto
• [PATCH 03/03] sata_mv: replace 0x1f with ATA_PIO4
  • From: Mark Lord
• [PATCH 02/03] sata_mv: fix irq mask races
  • From: Mark Lord
• [PATCH 01/03] sata_mv: revert SoC irq breakage
  • From: Mark Lord
• Re: [PATCH] tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
  • From: Sergei Shtylyov
• [PATCH] tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}
  • From: Atsushi Nemoto
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: [PATCH 1/5] Block: Discard may need to allocate pages
  • From: Boaz Harrosh
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Данила Жукоцкий
• [PATCH 2/2] ide-cd: cdrom_decode_status: use return codes instead of naked numbers
  • From: Borislav Petkov
• [PATCH 1/2] ide-cd: reverse NOT_READY sense key logic
  • From: Borislav Petkov
• Re: [PATCH 5/5] ide-cd: fix intendation in cdrom_decode_status()
  • From: Borislav Petkov
• Re: [PATCH 4/5] ide-cd: unify handling of fs and pc requests in cdrom_decode_status()
  • From: Borislav Petkov
• Re: [PATCH 3/5] ide-cd: convert cdrom_decode_status() to use switch statements
  • From: Borislav Petkov
• Re: [PATCH 3/5] ide-cd: convert cdrom_decode_status() to use switch statements
  • From: Borislav Petkov
• Re: [PATCH 1/5] ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status()
  • From: Borislav Petkov
• [PATCH 1/2] ide: remove unused #include <linux/version.h>
  • From: Huang Weiyi
• Re: [Bugme-new] [Bug 13001] New: PCI-DMA: Out of IOMMU space
  • From: Andrew Morton
• Odd RAID failure
  • From: Lelsie Rhorer
• Re: ata_check_status_mmio exception kernel panic
  • From: Tejun Heo
• Re: ata_check_status_mmio exception kernel panic
  • From: Alan Cox
• Re: [PATCH 3/3] ide-cd: cdrom_decode_status: simplify do_end_request logic
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Borislav Petkov
• Re: Bug 453808 - qc timeout probing TEAC DV-28E-V CD/DVD drive on SATA/PATA bridge
  • From: David Milburn
• Re: Problems with >3 drives on an eSATA portmultiplier
  • From: Justin Fletcher
• [PATCH v2] libata: ahci enclosure management bios workaround
  • From: David Milburn
• Re: LibATA SCSI WRITE_BUFFER to ATA DOWNLOAD_MICROCODE patch
  • From: James Bottomley
• RE: Bug 453808 - qc timeout probing TEAC DV-28E-V CD/DVD drive on SATA/PATA bridge
  • From: Courtney-Bakke, Julia (ISS H/W EPR)
• Re: LibATA SCSI WRITE_BUFFER to ATA DOWNLOAD_MICROCODE patch
  • From: Jeff Garzik
• [PATCH 5/5] ide-cd: fix intendation in cdrom_decode_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/5] ide-cd: unify handling of fs and pc requests in cdrom_decode_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/5] ide-cd: convert cdrom_decode_status() to use switch statements
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/5] ide-cd: update debugging support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/5] ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/3] ide-cd: carve out an ide_cd_breathe()-helper for fs write requests
  • From: Bartlomiej Zolnierkiewicz
• Re: ata_check_status_mmio exception kernel panic
  • From: Dustin Harrison
• Re: [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Borislav Petkov
• Re: [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Borislav Petkov
• [PATCH 3/3] ide-cd: cdrom_decode_status: simplify do_end_request logic
  • From: Borislav Petkov
• [PATCH 1/3] ide-cd: carve out an ide_cd_breathe()-helper for fs write requests
  • From: Borislav Petkov
• Re: [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Borislav Petkov
• Re: [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/3] ide-cd: move status checking into the IRQ handler
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH resend 2/2] ide-h8300: remove custom tf_{read|load}() methods
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH resend 1/2] at91_ide: remove custom tf_{read|load}() methods
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-h8300: remove mm_{inw|outw}()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] tx4939ide: remove wmb()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] tx4939ide: remove wmb()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] linux-next remove wmb() from ide-dma-sff.c and scc_pata.c
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: falconide/q40ide - Use __ide_mm_{in,out}sw() for data transfer
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: Fix host drivers that need IRQF_SHARED
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/6] ide: refactor tf_read() method
  • From: Sergei Shtylyov
• [PATCH 5/6] ide: refactor tf_load() method
  • From: Sergei Shtylyov
• [PATCH 4/6] ide: call write_devctl() method from tf_read() method
  • From: Sergei Shtylyov
• [PATCH 3/6] ide: move common code out of tf_load() method
  • From: Sergei Shtylyov
• [PATCH 2/6] ide: simplify 'struct ide_taskfile'
  • From: Sergei Shtylyov
• [PATCH 1/6] ide: replace IDE_TFLAG_* flags by IDE_VALID_*
  • From: Sergei Shtylyov
• Re: [PATCH 5/5] libata: Add support for TRIM
  • From: Matthew Wilcox
• Re: LibATA SCSI WRITE_BUFFER to ATA DOWNLOAD_MICROCODE patch
  • From: Mark Lord
• Re: [PATCH 5/5] libata: Add support for TRIM
  • From: Mark Lord
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Matthew Wilcox
• Re: [PATCH 3/5] ata: Add TRIM infrastructure
  • From: Matthew Wilcox
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Sergei Shtylyov
• Re: [PATCH 3/5] ata: Add TRIM infrastructure
  • From: Sergei Shtylyov
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Matthew Wilcox
• Re: [PATCH] libata: ahci enclosure management bios workaround
  • From: David Milburn
• Re: [PATCH 3/5] ata: Add TRIM infrastructure
  • From: Matthew Wilcox
• Re: [PATCH 4/5] ide: Add support for TRIM
  • From: Sergei Shtylyov
• Re: [PATCH 3/5] ata: Add TRIM infrastructure
  • From: Sergei Shtylyov
• RE: LibATA SCSI WRITE_BUFFER to ATA DOWNLOAD_MICROCODE patch
  • From: Miller, Mike (OS Dev)
• [PATCH 3/5] ata: Add TRIM infrastructure
  • From: Matthew Wilcox
• [PATCH 2/5] Make DISCARD_BARRIER and DISCARD_NOBARRIER writes instead of reads
  • From: Matthew Wilcox
• [PATCH 4/5] ide: Add support for TRIM
  • From: Matthew Wilcox
• [PATCH 1/5] Block: Discard may need to allocate pages
  • From: Matthew Wilcox
• [PATCH 5/5] libata: Add support for TRIM
  • From: Matthew Wilcox
• Re: IDE, packet commands and REQ_TYPE_SENSE?
  • From: Borislav Petkov
• Errors on ICH10R with Seagate HDDs
  • From: Thomas Jackowski
• Re: [PATCH] de: drivers/ide/ide-atapi.c needs <linux/scatterlist.h>
  • From: Dmitri Vorobiev
• Re: IDE, packet commands and REQ_TYPE_SENSE?
  • From: Jeff Garzik
• IDE, packet commands and REQ_TYPE_SENSE?
  • From: Jeff Garzik
• [PATCH 2/3] ide-cd: cleanup cdrom_decode_status
  • From: Borislav Petkov
• [PATCH] ide-cd: cdrom_decode_status: simplify do_end_request logic
  • From: Borislav Petkov
• [PATCH 1/3] ide-cd: move status checking into the IRQ handler
  • From: Borislav Petkov
• Re: PMPs
  • From: Tejun Heo
• Re: Problems with >3 drives on an eSATA portmultiplier
  • From: Tejun Heo
• [PATCH] libata: ahci enclosure management bios workaround
  • From: David Milburn
• Re: LibATA SCSI WRITE_BUFFER to ATA DOWNLOAD_MICROCODE patch
  • From: Greg Freemyer
• Re: LibATA SCSI WRITE_BUFFER to ATA DOWNLOAD_MICROCODE patch
  • From: James Bottomley
• LibATA SCSI WRITE_BUFFER to ATA DOWNLOAD_MICROCODE patch
  • From: salimmu
• [PATCH] ide: falconide/q40ide - Use __ide_mm_{in,out}sw() for data transfer
  • From: Geert Uytterhoeven
• [PATCH resend 2/2] ide-h8300: remove custom tf_{read|load}() methods
  • From: Sergei Shtylyov
• [PATCH resend 1/2] at91_ide: remove custom tf_{read|load}() methods
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] at91_ide: remove custom tf_{ead|load}() methods
  • From: Sergei Shtylyov
• PMPs
  • From: Mikael Abrahamsson
• [PATCH 2/2] ide-h8300: remove custom tf_{ead|load}() methods
  • From: Sergei Shtylyov
• [PATCH 1/2] at91_ide: remove custom tf_{ead|load}() methods
  • From: Sergei Shtylyov
• Re: Linux 2.6.29
  • From: Mark Lord
• Re: [patch 2.6.29-davinci1 git] dm6446evm CF support
  • From: Sergei Shtylyov
• Re: Problems with >3 drives on an eSATA portmultiplier
  • From: Grant Grundler
• [PATCH] ide-h8300: remove mm_{inw|outw}()
  • From: Sergei Shtylyov
• Re: Problems with >3 drives on an eSATA portmultiplier
  • From: Justin Fletcher
• Re: Problems with >3 drives on an eSATA portmultiplier
  • From: Grant Grundler
• Problems with >3 drives on an eSATA portmultiplier
  • From: Justin Fletcher
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Boaz Harrosh
• Re: Mysteriously slow writes SiI 3124
  • From: James Andrewartha
• Re: ata_check_status_mmio exception kernel panic
  • From: Tejun Heo
• Re: ata_check_status_mmio exception kernel panic
  • From: Sagar Borikar
• ata_check_status_mmio exception kernel panic
  • From: Sagar Borikar
• Re: Linux 2.6.29
  • From: Jeff Garzik
• [PATCH] libata: Remove some redundant casts from pata_octeon_cf.c
  • From: David Daney
• [git pull] IDE updates part 3
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: Fix host drivers that need IRQF_SHARED
  • From: Geert Uytterhoeven
• Re: [PATCH 3/4] ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 3)
  • From: Sergei Shtylyov
• Re: [PATCH 3/4] ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 3)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 3)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: turn selectproc() method into dev_select() method (take 5)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: turn selectproc() method into dev_select() method (take 5)
  • From: Sergei Shtylyov
• [PATCH] at91_ide: fix ->ftf_flags handling
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] tx4939ide: remove wmb()
  • From: Grant Grundler
• [PATCH] tx4939ide: remove wmb()
  • From: Atsushi Nemoto
• Re: [PATCH] linux-next remove wmb() from ide-dma-sff.c and scc_pata.c
  • From: Atsushi Nemoto
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] ata_piix: VGN-BX297XP wants the controller power up on suspend
  • From: Rafael J. Wysocki
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Boaz Harrosh
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• Re: [PATCH] linux-next remove wmb() from ide-dma-sff.c and scc_pata.c
  • From: KOBAYASHI Yoshitake
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Tejun Heo
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Tejun Heo
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Boaz Harrosh
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: [PATCH] linux-next remove wmb() from ide-dma-sff.c and scc_pata.c
  • From: Geert Uytterhoeven
• Re: [RFC PATCHSET pata-2.6] ide: clean up ide-tape
  • From: Borislav Petkov
• Re: [PATCH] de: drivers/ide/ide-atapi.c needs <linux/scatterlist.h>
  • From: Geert Uytterhoeven
• [PATCH #upstream-fixes] ata_piix: VGN-BX297XP wants the controller power up on suspend
  • From: Tejun Heo
• [PATCH] linux-next remove wmb() from ide-dma-sff.c and scc_pata.c
  • From: Grant Grundler
• Re: lost external eSATA port
  • From: kenneth johansson
• Re: [PATCH] de: drivers/ide/ide-atapi.c needs <linux/scatterlist.h>
  • From: Bartlomiej Zolnierkiewicz
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Tejun Heo
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Tejun Heo
• Re: [eSATA] 2.6.28.7: IO errors
  • From: Mark Lord
• Re: EP93xx PIO IDE driver proposal
  • From: Sergei Shtylyov
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Bartlomiej Zolnierkiewicz
• Re: [git pull] IDE updates part 2
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Boaz Harrosh
• Re: [eSATA] 2.6.28.7: IO errors
  • From: Guennadi Liakhovetski
• Re: [eSATA] 2.6.28.7: IO errors
  • From: Tejun Heo
• Re: [eSATA] 2.6.28.7: IO errors
  • From: Guennadi Liakhovetski
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Tejun Heo
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: Tejun Heo
• [PATCH 1/1] ide: add missing include into drivers/ide/ide-atapi.c
  • From: Dmitri Vorobiev
• Re: lost external eSATA port
  • From: Tejun Heo
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: Tejun Heo
• Re: [eSATA] 2.6.28.7: IO errors
  • From: Tejun Heo
• Re: [PATCH] Removing PCI dependency of ahci and making it amba bus compatible
  • From: Jeff Garzik
• Re: [PATCH] Removing PCI dependency of ahci and making it amba bus compatible
  • From: Jeff Garzik
• [PATCH] de: drivers/ide/ide-atapi.c needs <linux/scatterlist.h>
  • From: Geert Uytterhoeven
• lost external eSATA port
  • From: kenneth johansson
• Re: PROBLEM: When hibernating or resuming, ide driver locks the computer with 100% cpu utilization (2.6.28.7)
  • From: Pedro R
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: Rafael J. Wysocki
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Borislav Petkov
• Re: [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Bartlomiej Zolnierkiewicz
• Re: [eSATA] 2.6.28.7: IO errors
  • From: Guennadi Liakhovetski
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: Niel Lambrechts
• Re: PROBLEM: When hibernating or resuming, ide driver locks the computer with 100% cpu utilization (2.6.28.7)
  • From: Borislav Petkov
• Re: [PATCH 13/14] ide-atapi: use bio for request sense
  • From: Borislav Petkov
• Re: [eSATA] 2.6.28.7: IO errors
  • From: Matthew Wilcox
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: Arjan van de Ven
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: Niel Lambrechts
• Re: PROBLEM: When hibernating or resuming, ide driver locks the computer with 100% cpu utilization (2.6.28.7)
  • From: Pedro R
• [git pull] IDE updates part 2
  • From: Bartlomiej Zolnierkiewicz
• Re: PROBLEM: When hibernating or resuming, ide driver locks the computer with 100% cpu utilization (2.6.28.7)
  • From: Borislav Petkov
• PROBLEM: When hibernating or resuming, ide driver locks the computer with 100% cpu utilization (2.6.28.7)
  • From: Pedro R
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Tejun Heo
• Re: [PATCH] Removing PCI dependency of ahci and making it amba bus compatible
  • From: Tejun Heo
• Re: [PATCH] Removing PCI dependency of ahci and making it amba bus compatible
  • From: Tejun Heo
• Re: bug in use-ide_pio_bytes patch?
  • From: Bartlomiej Zolnierkiewicz
• Re: ide: Fix code dealing with sleeping devices in do_ide_request()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: turn selectproc() method into dev_select() method (take 5)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Boaz Harrosh
• [PATCH] Removing PCI dependency of ahci and making it amba bus compatible
  • From: Sagar Borikar
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Tejun Heo
• [Bug 6883] ide-probe.c attempts to use polling designed for ancient Seagate drives on some compact flash disks
  • From: bugzilla-daemon
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Boaz Harrosh
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Tejun Heo
• Re: [PATCH 11/14] ide-cd: don't abuse rq->buffer
  • From: Borislav Petkov
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Boaz Harrosh
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Boaz Harrosh
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Tejun Heo
• Re: [PATCH 07/14] ide-cd: clear sense buffer before issuing request sense
  • From: Tejun Heo
• Re: [PATCH 07/14] ide-cd: clear sense buffer before issuing request sense
  • From: Borislav Petkov
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Tejun Heo
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: James Bottomley
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: Niel Lambrechts
• ide: Fix code dealing with sleeping devices in do_ide_request()
  • From: Elias Oltmanns
• Re: [PATCH 02/10] ide-tape: use single continuous buffer
  • From: Borislav Petkov
• Re: [PATCH 02/10] ide-tape: use single continuous buffer
  • From: Tejun Heo
• Re: [PATCH 02/10] ide-tape: use single continuous buffer
  • From: Grant Grundler
• Re: [PATCH 04/10] ide-tape: use standard data transfer mechanism
  • From: Borislav Petkov
• Re: [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Boaz Harrosh
• Re: [PATCH 04/10] ide-tape: use standard data transfer mechanism
  • From: Borislav Petkov
• [PATCH 03/10 REPOST] ide-tape: use bio to carry data area
  • From: Tejun Heo
• [PATCH 10/10] ide: drop rq->data handling from ide_map_sg()
  • From: Tejun Heo
• [PATCH 09/10] ide-atapi: kill unused fields and callbacks
  • From: Tejun Heo
• [PATCH 08/10] ide-tape: simplify read/write functions
  • From: Tejun Heo
• [PATCH 07/10] ide-tape: use byte size instead of sectors on rw issue functions
  • From: Tejun Heo
• [PATCH 05/10] ide-tape: kill idetape_bh
  • From: Tejun Heo
• [PATCH 06/10] ide-tape: unify r/w init paths
  • From: Tejun Heo
• [PATCH 01/10] ide-atapi: allow ->pc_callback() to change rq->data_len
  • From: Tejun Heo
• [PATCH 03/10] ide-tape-convert-to-bio
  • From: Tejun Heo
• [PATCH 02/10] ide-tape: use single continuous buffer
  • From: Tejun Heo
• [PATCH 04/10] ide-tape: use standard data transfer mechanism
  • From: Tejun Heo
• [RFC PATCHSET pata-2.6] ide: clean up ide-tape
  • From: Tejun Heo
• Re: [PATCH 02/03] sata_mv cosmetic preparations for IRQ coalescing
  • From: Mark Lord
• [PATCH] ide: turn selectproc() method into dev_select() method (take 5)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: turn selectproc() method into dev_select() method (take 4)
  • From: Sergei Shtylyov
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: bug in use-ide_pio_bytes patch?
  • From: Borislav Petkov
• Re: 2.6.29 regression: ATA bus errors on resume
  • From: Jeff Garzik
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 4/4] libata: Improve timeout handling
  • From: Jeff Garzik
• Re: [PATCH 3/4] libata: Drain data on errors
  • From: Jeff Garzik
• Re: [PATCH 1/4] pata_artop: Serializing support
  • From: Jeff Garzik
• Re: [PATCH] libata: ahci enclosure save new led state
  • From: Jeff Garzik
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Jeff Garzik
• Re: [PATCH 02/03] sata_mv cosmetic preparations for IRQ coalescing
  • From: Jeff Garzik
• Re: [PATCH 02/03] sata_mv cosmetic preparations for IRQ coalescing
  • From: Jeff Garzik
• Re: [PATCH] pata-rb532-cf: platform_get_irq() failure ignored
  • From: Jeff Garzik
• Re: [PATCH] ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off
  • From: Jeff Garzik
• Re: [PATCH 1/2 v2] ide/ata: add some more transfer masks to ata.h
  • From: Jeff Garzik
• [git pull] IDE updates part 1
  • From: Bartlomiej Zolnierkiewicz
• Re: How to configure 36 disks ?
  • From: Goswin von Brederlow
• [PATCH] ide: turn selectproc() method into dev_select() method (take 4)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: turn selectproc() method into dev_select() method (take 3)
  • From: Sergei Shtylyov
• [PATCH 07/14] ide-cd: clear sense buffer before issuing request sense
  • From: Tejun Heo
• [PATCH 13/14] ide-atapi: use bio for request sense
  • From: Tejun Heo
• [PATCH 11/14] ide-cd: don't abuse rq->buffer
  • From: Tejun Heo
• [PATCH 12/14] ide-pm: don't abuse rq->data
  • From: Tejun Heo
• [PATCH 14/14] ide-cd: use bio for request sense
  • From: Tejun Heo
• [PATCH 10/14] ide-atapi: don't abuse rq->buffer
  • From: Tejun Heo
• [PATCH 08/14] ide-floppy: block pc always uses bio
  • From: Tejun Heo
• [PATCH 09/14] ide-taskfile: don't abuse rq->buffer
  • From: Tejun Heo
• [PATCH 05/14] ide: don't set REQ_SOFTBARRIER
  • From: Tejun Heo
• [PATCH 06/14] ide kill unused ide_cmd->special
  • From: Tejun Heo
• [PATCH 04/14] ide: use blk_run_queue() instead of blk_start_queueing()
  • From: Tejun Heo
• [PATCH 03/14] block: implement blk_rq_map_kern_prealloc()
  • From: Tejun Heo
• [PATCH 01/14] block: clear req->errors on bio completion only for fs requests
  • From: Tejun Heo
• [PATCH 02/14] block: reorganize [__]bio_map_kern()
  • From: Tejun Heo
• [PATCHSET pata-2.6] ide: rq->buffer, data, special and misc cleanups
  • From: Tejun Heo
• [PATCH] ide: turn selectproc() method into dev_select() method (take 3)
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] ide: turn selectproc() method into dev_select() method (take 2)
  • From: Sergei Shtylyov
• [PATCH 4/4] libata: Improve timeout handling
  • From: Alan Cox
• [PATCH 3/4] libata: Drain data on errors
  • From: Alan Cox
• [PATCH 2/4] pata_sc1200: Activate secondary channel
  • From: Alan Cox
• [PATCH 1/4] pata_artop: Serializing support
  • From: Alan Cox
• [PATCH 0/4] libata patches for 2.6.30
  • From: Alan Cox
• [PATCH 1/4] pata_artop: Serializing support
  • From: Alan Cox
• Re: hot plug on ICH9 with AHCI on
  • From: Владимир Дашевский
• Re: [PATCH 1/2] ide: turn selectproc() method into dev_select() method (take 2)
  • From: Borislav Petkov
• Re: [PATCH] IDE cable detection on Apple PowerBook
  • From: TOMARI Hisanobu
• Re: [PATCH] IDE cable detection on Apple PowerBook
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide: turn selectproc() method into dev_select() method (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [Bug 8728] IT8211 IDE CDROM support cause hardlock on bootup
  • From: bugme-daemon
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Mark Lord
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Greg Freemyer
• [Bug 8728] IT8211 IDE CDROM support cause hardlock on bootup
  • From: bugme-daemon
• [Bug 8988] via82cxxx: SATA DVD-RW Pioneer DVR-212BK with CX700, system hangs
  • From: bugme-daemon
• Re: How to configure 36 disks ?
  • From: Mikael Abrahamsson
• Re: How to configure 36 disks ?
  • From: Greg Freemyer
• Re: How to configure 36 disks ?
  • From: Christopher Smith
• Re: How to configure 36 disks ?
  • From: Raz
• Re: How to configure 36 disks ?
  • From: Mark Lord
• Re: How to configure 36 disks ?
  • From: Jon Hardcastle
• Re: How to configure 36 disks ?
  • From: Bill Davidsen
• Re: How to configure 36 disks ?
  • From: Emmanuel Florac
• How to configure 36 disks ?
  • From: Raz
• [PATCH 1/2] ide: turn selectproc() method into dev_select() method (take 2)
  • From: Sergei Shtylyov
• Re: hot plug on ICH9 with AHCI on
  • From: Tejun Heo
• Re: bug in use-ide_pio_bytes patch?
  • From: Bartlomiej Zolnierkiewicz
• Re: hot plug on ICH9 with AHCI on
  • From: Владимир Дашевский
• Re: [PATCH] IDE cable detection on Apple PowerBook
  • From: TOMARI Hisanobu
• Re: [PATCH] IDE cable detection on Apple PowerBook
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] ide: turn selectproc() method into dev_select() method
  • From: Sergei Shtylyov
• Re: bug in use-ide_pio_bytes patch?
  • From: Tejun Heo
• Re: bug in use-ide_pio_bytes patch?
  • From: Bartlomiej Zolnierkiewicz
• bug in use-ide_pio_bytes patch?
  • From: Tejun Heo
• Re: hot plug on ICH9 with AHCI on
  • From: Tejun Heo
• Re: [PATCH 4/6] PalmLD IDE
  • From: Marek Vasut
• ata_piix and ALPM
  • From: Erik Andrén
• Re: hot plug on ICH9 with AHCI on
  • From: Владимир Дашевский
• Re: hot plug on ICH9 with AHCI on
  • From: Tejun Heo
• Re: hot plug on ICH9 with AHCI on
  • From: Владимир Дашевский
• Re: hot plug on ICH9 with AHCI on
  • From: Tejun Heo
• Re: hot plug on ICH9 with AHCI on
  • From: Владимир Дашевский
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: Norman Diamond
• [PATCH] IDE cable detection on Apple PowerBook
  • From: TOMARI Hisanobu
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: Mark Lord
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: James Bottomley
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: Alan Cox
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: James Bottomley
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: Mark Lord
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Mark Lord
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: Mark Lord
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: James Bottomley
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Alan Cox
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Mark Lord
• Re: Q on SATA/AHCI - AHCI driver changes for device reset and testing
  • From: Jeff Garzik
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Tejun Heo
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Jeff Garzik
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Tejun Heo
• [PATCH] libata: ahci enclosure save new led state
  • From: David Milburn
• Re: [PATCH 2/2] ide: inline SELECT_DRIVE()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide: turn selectproc() method into dev_select() method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS
  • From: Bartlomiej Zolnierkiewicz
• Re: AHCI link power management and surprise hotplug
  • From: Kristen Carlson Accardi
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Mark Lord
• Re: hot plug on ICH9 with AHCI on
  • From: Владимир Дашевский
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Alan Cox
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Alan Cox
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Mark Lord
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Mark Lord
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: Mark Lord
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: Andrew Morton
• Re: hot plug on ICH9 with AHCI on
  • From: Владимир Дашевский
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Mark Lord
• Re: Overagressive failing of disk reads, both LIBATA and IDE
  • From: Mark Lord
• Overagressive failing of disk reads, both LIBATA and IDE
  • From: Norman Diamond
• Re: hot plug on ICH9 with AHCI on
  • From: Tejun Heo
• Re: AHCI link power management and surprise hotplug
  • From: Tejun Heo
• Re: [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Tejun Heo
• Re: [PATCH] ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off
  • From: Tejun Heo
• [PATCH] ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off
  • From: Rafael J. Wysocki
• Re: [PATCH 1/2] ide: turn selectproc() method into dev_select() method
  • From: Benjamin Herrenschmidt
• Re: AHCI link power management and surprise hotplug
  • From: Jeff Garzik
• [PATCH] libata-core More robust parsing for multi_count(v5)
  • From: Mark Lord
• [PATCH] libata-core More robust parsing for multi_count(v4)
  • From: Mark Lord
• Re: [PATCH 1/2] ide: turn selectproc() method into dev_select() method
  • From: Sergei Shtylyov
• [PATCH 2/2] ide: inline SELECT_DRIVE()
  • From: Sergei Shtylyov
• [PATCH 1/2] ide: turn selectproc() method into dev_select() method
  • From: Sergei Shtylyov
• AHCI link power management and surprise hotplug
  • From: Tim Small
• Re: [PATCH] MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS
  • From: Borislav Petkov
• Basic working iso
  • From: gettinther
• Re: [PATCH] libata-core More robust parsing for multi_count(v3)
  • From: Tejun Heo
• Re: [PATCH] libata-core More robust parsing for multi_count(v3)
  • From: Tejun Heo
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugme-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugme-daemon
• hot plug on ICH9 with AHCI on
  • From: Владимир Дашевский
• [PATCH] MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/4] ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: turn set_irq() method into write_devctl() method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/4] ide: move data register access out of tf_{read|load}() methods (take 2)
  • From: Sergei Shtylyov
• [PATCH 3/4] ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH 3/4] ide: call {in|out}put_data() methods from tf_{read|load}() methods
  • From: Sergei Shtylyov
• [PATCH 4/4] ide: move data register access out of tf_{read|load}() methods
  • From: Sergei Shtylyov
• [PATCH 3/4] ide: call {in|out}put_data() methods from tf_{read|load}() methods
  • From: Sergei Shtylyov
• [PATCH 2/4] ide-io-std: shorten ide_{in|out}put_data()
  • From: Sergei Shtylyov
• [PATCH 1/4] ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
  • From: Sergei Shtylyov
• [PATCH] ide: turn set_irq() method into write_devctl() method
  • From: Sergei Shtylyov
• Re: [PATCH] libata-core Use more robust parsing for multi_count
  • From: Alan Cox
• Re: [PATCH] libata-core More robust parsing for multi_count(v3)
  • From: Mark Lord
• [PATCH] libata-core More robust parsing for multi_count(v3)
  • From: Mark Lord
• Re: [PATCH] libata-core Use more robust parsing for multi_count
  • From: Mark Lord
• Re: [PATCH] libata-core Use more robust parsing for multi_count
  • From: Mark Lord
• Re: [PATCH] libata-core Use more robust parsing for multi_count
  • From: Mark Lord
• Re: ATA support for 4k sector size
  • From: James Bottomley
• Re: [PATCH] libata-core Use more robust parsing for multi_count
  • From: Alan Cox
• [PATCH] libata-core Use more robust parsing for multi_count
  • From: Mark Lord
• PROBLEM: Second SATA drive partitions not made available
  • From: Micah Anderson
• Re: AHCI errors on ICH10 board
  • From: Jeff Garzik
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: [PATCH 1/2] ide-disk: use ATA_ERR
  • From: Bartlomiej Zolnierkiewicz