Dustin, please see if these two patches solve your problem? commit a6a2da59f2a4ba834a6e20e2d2a4d030bb9371ea Author: Jeff Garzik <jeff@xxxxxxxxxx> Date: Tue Apr 7 19:18:32 2009 -0400 [libata] sata_sil: disable DMA engine in sil_freeze() We must disable the DMA engine before accessing taskfile registers. Signed-off-by: Jeff Garzik <jgarzik@xxxxxxxxxx> diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index e67ce8e..896975f 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -565,6 +565,19 @@ static void sil_freeze(struct ata_port *ap) tmp |= SIL_MASK_IDE0_INT << ap->port_no; writel(tmp, mmio_base + SIL_SYSCFG); readl(mmio_base + SIL_SYSCFG); /* flush */ + + /* Ensure DMA_ENABLE is off. + * + * This is because the controller will not give us access to the + * taskfile registers while a DMA is in progress + */ + iowrite8(ioread8(ap->ioaddr.bmdma_addr) & ~SIL_DMA_ENABLE, + ap->ioaddr.bmdma_addr); + + /* According to ata_bmdma_stop, an HDMA transition requires + * on PIO cycle. But we can't read a taskfile register. + */ + ioread8(ap->ioaddr.bmdma_addr); } static void sil_thaw(struct ata_port *ap) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html