Re: Frequent Head Unload Problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Gavin Cameron wrote:
Can you try doing smartctl -a on both drives before and after you hear the noise and see if it seems to match up with any of the counters changing?

Here's the build up:
sudo smartctl -a /dev/sda > sda_start
sudo smartctl -a /dev/sdb > sdb_start
... a few mins while noises go on ...
sudo smartctl -a /dev/sda > sda_end
sudo smartctl -a /dev/sdb > sdb_end

Here are the results:
diff sda_start sda_end
13c13
< Local Time is:    Fri Apr 17 16:03:40 2009 BST
---
 > Local Time is:    Fri Apr 17 16:17:20 2009 BST
66c66
< 194 Temperature_Celsius 0x0002 253 253 000 Old_age Always - 17 (Lifetime Min/Max 9/38)
---
> 194 Temperature_Celsius 0x0002 240 240 000 Old_age Always - 25 (Lifetime Min/Max 9/38)
88a89
 >

So nothing there apart from the temperature. However:
diff sdb_start sdb_end
13c13
< Local Time is:    Fri Apr 17 16:03:42 2009 BST
---
 > Local Time is:    Fri Apr 17 16:17:26 2009 BST
57,59c57,59
< 7 Seek_Error_Rate 0x000a 199 199 000 Old_age Always - 80 < 8 Seek_Time_Performance 0x0027 246 238 187 Pre-fail Always - 39281 < 9 Power_On_Minutes 0x0032 229 229 000 Old_age Always - 710h+53m
---
> 7 Seek_Error_Rate 0x000a 199 198 000 Old_age Always - 43 > 8 Seek_Time_Performance 0x0027 246 238 187 Pre-fail Always - 45449 > 9 Power_On_Minutes 0x0032 229 229 000 Old_age Always - 711h+07m
65,66c65,66
< 194 Temperature_Celsius 0x0032 037 253 000 Old_age Always - 17 < 195 Hardware_ECC_Recovered 0x000a 253 251 000 Old_age Always - 36907
---
> 194 Temperature_Celsius 0x0032 037 253 000 Old_age Always - 24 > 195 Hardware_ECC_Recovered 0x000a 253 251 000 Old_age Always - 31779
70c70
< 199 UDMA_CRC_Error_Count 0x0008 084 001 000 Old_age Offline - 768
---
> 199 UDMA_CRC_Error_Count 0x0008 100 001 000 Old_age Offline - 768
72c72
< 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0
---
> 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 2
100a101
 >

Looks to me like this drive could well be on its way out! None of the counters (Start_Stop_Count for example) were changing, but lots of CRC and error counts are.

What do you think? Just a knackered drive and nothing to do with libata at all?

Yeah, it's possible that what you're hearing isn't a head unload at all, but some kind of abnormal recalibration noise, etc.

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux