Hi! Many thanks for all of your responses, I'll try and deal with all of the issues in one email. ;) Hardware is an ECS KV2-Lite motherboard with an AMD Athlon64 X2 Dual Core Processor 4200+. DVD-ROM drives are Sony DW-G120A. My version of libata (from libata.h and dmesg) is 3.00. I am using the VIA driver: matt@Dexter64:~$ lsmod | grep ata pata_via 18180 2 sata_via 17668 0 ata_generic 14212 0 pata_acpi 13568 0 libata 201312 4 pata_via,sata_via,ata_generic,pata_acpi scsi_mod 183160 4 sr_mod,sd_mod,sg,libata dock 18464 1 libata matt@Dexter64:~$ Please find attached my dmesg. Jeff - when the errors start, I am unable to play / rip audio CDs. Many thanks in advance for your help, Matt Grice PS - How do you find out if a drive has been forced from DMA to PIO mode during operation?
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-11-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:28:32 UTC 2009 (Ubuntu 2.6.27-11.27-generic) [ 0.000000] Command line: root=UUID=566f5921-d45d-47b0-bda2-6538fa9927b7 ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fee0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fee0000 @ 10000-14000 [ 0.000000] last_map_addr: 7fee0000 end: 7fee0000 [ 0.000000] RAMDISK: 377ac000 - 37feffff [ 0.000000] ACPI: RSDP 000F7680, 0014 (r0 VIAK8T) [ 0.000000] ACPI: RSDT 7FEE3040, 0030 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FEE3180, 4D6E (r1 VIAK8T AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: SSDT 7FEE8000, 01CA (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: APIC 7FEE7F40, 0068 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fee0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000026fdf] pages 10 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007fee0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b9f5c] TEXT DATA BSS ==> [0000200000 - 00008b9f5c] [ 0.000000] #3 [00377ac000 - 0037feffff] RAMDISK ==> [00377ac000 - 0037feffff] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f3800] 000f3800 [ 0.000000] [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fee0 [ 0.000000] On node 0 totalpages: 523887 [ 0.000000] DMA zone: 2094 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 511780 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:7ed00000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513874 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=566f5921-d45d-47b0-bda2-6538fa9927b7 ro quiet [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2199.699 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] AGP bridge at 00:00:00 [ 0.004000] Aperture from AGP @ f0000000 old size 32 MB [ 0.004000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20) [ 0.004000] Node 0: aperture @ f0000000 size 128 MB [ 0.004000] Memory: 2047140k/2096000k available (3116k kernel code, 48408k reserved, 1575k data, 540k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.39 BogoMIPS (lpj=8798796) [ 0.004053] Security Framework initialized [ 0.004065] SELinux: Disabled at boot. [ 0.004089] AppArmor: AppArmor initialized [ 0.004321] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.007090] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.008488] Mount-cache hash table entries: 256 [ 0.008772] Initializing cgroup subsys ns [ 0.008776] Initializing cgroup subsys cpuacct [ 0.008779] Initializing cgroup subsys memory [ 0.008799] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008801] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008804] CPU 0/0 -> Node 0 [ 0.008806] tseg: 007ff00000 [ 0.008807] CPU: Physical Processor ID: 0 [ 0.008809] CPU: Processor Core ID: 0 [ 0.010267] ACPI: Core revision 20080609 [ 0.012261] ACPI: Checking initramfs for custom DSDT [ 0.337017] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.376999] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 0.377003] Using local APIC timer interrupts. [ 0.380025] APIC timer calibration result 12498293 [ 0.380026] Detected 12.498 MHz APIC timer. [ 0.380215] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4399.47 BogoMIPS (lpj=8798956) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.468254] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 0.468270] Brought up 2 CPUs [ 0.468273] Total of 2 processors activated (8798.87 BogoMIPS). [ 0.468478] CPU0 attaching sched-domain: [ 0.468480] domain 0: span 0-1 level CPU [ 0.468482] groups: 0 1 [ 0.468486] domain 1: span 0-1 level NODE [ 0.468487] groups: 0-1 [ 0.468493] CPU1 attaching sched-domain: [ 0.468494] domain 0: span 0-1 level CPU [ 0.468496] groups: 1 0 [ 0.468498] domain 1: span 0-1 level NODE [ 0.468500] groups: 0-1 [ 0.468596] net_namespace: 1552 bytes [ 0.468596] Booting paravirtualized kernel on bare hardware [ 0.468596] Time: 15:50:04 Date: 04/08/09 [ 0.468596] NET: Registered protocol family 16 [ 0.468596] node 0 link 0: io port [e000, ffff] [ 0.468596] TOM: 0000000080000000 aka 2048M [ 0.468596] node 0 link 0: mmio [a0000, bffff] [ 0.468596] node 0 link 0: mmio [80000000, ffffffff] [ 0.468596] bus: [00,01] on node 0 link 0 [ 0.468596] bus: 00 index 0 io port: [0, ffff] [ 0.468596] bus: 00 index 1 mmio: [a0000, bffff] [ 0.468596] bus: 00 index 2 mmio: [80000000, fcffffffff] [ 0.468596] ACPI: bus type pci registered [ 0.468596] PCI: Using configuration type 1 for base access [ 0.468596] ACPI: EC: Look up EC in DSDT [ 0.479091] ACPI: Interpreter enabled [ 0.479098] ACPI: (supports S0 S3 S4 S5) [ 0.479117] ACPI: Using IOAPIC for interrupt routing [ 0.484603] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.484603] PCI: 0000:00:00.0 reg 10 32bit mmio: [f0000000, f7ffffff] [ 0.484603] pci 0000:00:01.0: supports D1 [ 0.484603] PCI: 0000:00:0b.0 reg 10 32bit mmio: [fdffc000, fdffdfff] [ 0.484603] PCI: 0000:00:0f.0 reg 10 io port: [ff00, ff07] [ 0.484603] PCI: 0000:00:0f.0 reg 14 io port: [fe00, fe03] [ 0.484603] PCI: 0000:00:0f.0 reg 18 io port: [fd00, fd07] [ 0.484603] PCI: 0000:00:0f.0 reg 1c io port: [fc00, fc03] [ 0.484603] PCI: 0000:00:0f.0 reg 20 io port: [fb00, fb0f] [ 0.484603] PCI: 0000:00:0f.0 reg 24 io port: [f400, f4ff] [ 0.484603] PCI: 0000:00:0f.1 reg 20 io port: [fa00, fa0f] [ 0.484603] PCI: 0000:00:10.0 reg 20 io port: [f900, f91f] [ 0.484603] pci 0000:00:10.0: supports D1 [ 0.484603] pci 0000:00:10.0: supports D2 [ 0.484603] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.484603] pci 0000:00:10.0: PME# disabled [ 0.484603] PCI: 0000:00:10.1 reg 20 io port: [f800, f81f] [ 0.484611] pci 0000:00:10.1: supports D1 [ 0.484612] pci 0000:00:10.1: supports D2 [ 0.484614] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.484618] pci 0000:00:10.1: PME# disabled [ 0.484653] PCI: 0000:00:10.2 reg 20 io port: [f700, f71f] [ 0.484671] pci 0000:00:10.2: supports D1 [ 0.484672] pci 0000:00:10.2: supports D2 [ 0.484674] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.484677] pci 0000:00:10.2: PME# disabled [ 0.484713] PCI: 0000:00:10.3 reg 20 io port: [f600, f61f] [ 0.484732] pci 0000:00:10.3: supports D1 [ 0.484733] pci 0000:00:10.3: supports D2 [ 0.484734] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.484738] pci 0000:00:10.3: PME# disabled [ 0.484761] PCI: 0000:00:10.4 reg 10 32bit mmio: [fdfff000, fdfff0ff] [ 0.484793] pci 0000:00:10.4: supports D1 [ 0.484794] pci 0000:00:10.4: supports D2 [ 0.484796] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.484799] pci 0000:00:10.4: PME# disabled [ 0.484853] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.484887] PCI: 0000:00:11.5 reg 10 io port: [f200, f2ff] [ 0.484921] pci 0000:00:11.5: supports D1 [ 0.484922] pci 0000:00:11.5: supports D2 [ 0.484948] PCI: 0000:00:12.0 reg 10 io port: [f000, f0ff] [ 0.484953] PCI: 0000:00:12.0 reg 14 32bit mmio: [fdffe000, fdffe0ff] [ 0.484983] pci 0000:00:12.0: supports D1 [ 0.484984] pci 0000:00:12.0: supports D2 [ 0.484986] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.484989] pci 0000:00:12.0: PME# disabled [ 0.485082] PCI: 0000:01:00.0 reg 10 32bit mmio: [fa000000, faffffff] [ 0.485087] PCI: 0000:01:00.0 reg 14 32bit mmio: [e0000000, efffffff] [ 0.485092] PCI: 0000:01:00.0 reg 18 32bit mmio: [fb000000, fbffffff] [ 0.485106] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.485143] PCI: bridge 0000:00:01.0 io port: [e000, efff] [ 0.485147] PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fcffffff] [ 0.485150] PCI: bridge 0000:00:01.0 32bit mmio pref: [e0000000, efffffff] [ 0.485163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.542489] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 0.542489] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 0.542489] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12) [ 0.542489] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.544210] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *5 [ 0.544365] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.544520] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.544676] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.544882] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 0.545073] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 0.545265] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 0.545494] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [ 0.545539] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.545539] pnp: PnP ACPI init [ 0.545539] ACPI: bus type pnp registered [ 0.548795] pnp: PnP ACPI: found 13 devices [ 0.548795] ACPI: ACPI bus type pnp unregistered [ 0.548795] PCI: Using ACPI for IRQ routing [ 0.548795] pci 0000:00:00.0: BAR 0: can't allocate resource [ 0.564043] NET: Registered protocol family 8 [ 0.564044] NET: Registered protocol family 20 [ 0.564080] NetLabel: Initializing [ 0.564081] NetLabel: domain hash size = 128 [ 0.564083] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.564101] NetLabel: unlabeled traffic allowed by default [ 0.564146] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282] [ 0.570161] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 0.570161] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.570161] actual entries 65586 [ 0.570161] AppArmor: AppArmor Filesystem Enabled [ 0.570161] ACPI: RTC can wake from S4 [ 0.596056] system 00:00: iomem range 0xcf000-0xcffff has been reserved [ 0.596059] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.596061] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.596064] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.596067] system 00:00: iomem range 0x7ff00000-0x7fffffff has been reserved [ 0.596069] system 00:00: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 0.596072] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.596075] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.596077] system 00:00: iomem range 0x100000-0x7fedffff could not be reserved [ 0.596080] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.596082] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.596085] system 00:00: iomem range 0xfff80000-0xfffeffff could not be reserved [ 0.596094] system 00:02: ioport range 0x4000-0x407f has been reserved [ 0.596101] system 00:02: ioport range 0x5000-0x500f has been reserved [ 0.596108] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.596110] system 00:03: ioport range 0x800-0x805 has been reserved [ 0.596113] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.601416] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.601420] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.601425] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff [ 0.601429] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.601445] pci 0000:00:01.0: setting latency timer to 64 [ 0.601448] bus: 00 index 0 io port: [0, ffff] [ 0.601450] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.601452] bus: 01 index 0 io port: [e000, efff] [ 0.601454] bus: 01 index 1 mmio: [fa000000, fcffffff] [ 0.601456] bus: 01 index 2 mmio: [e0000000, efffffff] [ 0.601458] bus: 01 index 3 mmio: [0, 0] [ 0.601476] NET: Registered protocol family 2 [ 0.604048] Switched to high resolution mode on CPU 0 [ 0.604210] Switched to high resolution mode on CPU 1 [ 0.640129] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.641297] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.646680] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.647993] TCP: Hash tables configured (established 262144 bind 65536) [ 0.648020] TCP reno registered [ 0.660162] NET: Registered protocol family 1 [ 0.660318] checking if image is initramfs... it is [ 1.322456] Freeing initrd memory: 8463k freed [ 1.334129] audit: initializing netlink socket (disabled) [ 1.334156] type=2000 audit(1239205804.332:1): initialized [ 1.339657] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.342644] VFS: Disk quotas dquot_6.5.1 [ 1.342752] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.342885] msgmni has been set to 4014 [ 1.343042] io scheduler noop registered [ 1.343044] io scheduler anticipatory registered [ 1.343046] io scheduler deadline registered [ 1.343197] io scheduler cfq registered (default) [ 1.343216] PCI: VIA PCI bridge detected.Disabling DAC. [ 1.343322] pci 0000:01:00.0: Boot video device [ 1.383962] Linux agpgart interface v0.103 [ 1.383971] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.384527] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.385320] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.387583] brd: module loaded [ 1.387675] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.387840] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.389231] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.389242] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.409148] mice: PS/2 mouse device common for all mice [ 1.409318] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.409367] rtc0: alarms up to one year, y3k [ 1.409420] cpuidle: using governor ladder [ 1.409423] cpuidle: using governor menu [ 1.409822] TCP cubic registered [ 1.410093] registered taskstats version 1 [ 1.410251] Magic number: 5:964:840 [ 1.410339] tty ptyu6: hash matches [ 1.410437] rtc_cmos 00:05: setting system clock to 2009-04-08 15:50:05 UTC (1239205805) [ 1.410441] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.410442] EDD information not available. [ 1.410485] Freeing unused kernel memory: 540k freed [ 1.410912] Write protecting the kernel read-only data: 4352k [ 1.436104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.550699] fuse init (API version 7.9) [ 1.574762] processor ACPI0007:00: registered as cooling_device0 [ 1.574838] processor ACPI0007:01: registered as cooling_device1 [ 1.577206] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.577499] ACPI: Thermal Zone [THRM] (40 C) [ 1.862586] No dock devices found. [ 1.875024] SCSI subsystem initialized [ 1.908062] libata version 3.00 loaded. [ 1.910094] usbcore: registered new interface driver usbfs [ 1.910122] usbcore: registered new interface driver hub [ 1.910190] usbcore: registered new device driver usb [ 1.910614] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 1.910624] pata_acpi 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.910686] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 1.910705] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.910724] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 1.915337] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.915344] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 1.915772] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 1.915785] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 1.920168] eth0: VIA Rhine II at 0xfdffe000, 00:14:2a:12:4e:77, IRQ 23. [ 1.920878] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 1.930349] sata_via 0000:00:0f.0: version 2.3 [ 1.930382] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.930447] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.932710] scsi0 : sata_via [ 1.932893] scsi1 : sata_via [ 1.932938] ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 20 [ 1.932941] ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 20 [ 1.933124] USB Universal Host Controller Interface driver v3.0 [ 1.935405] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.136077] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 2.340037] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 2.340175] pata_via 0000:00:0f.1: version 0.3.3 [ 2.340214] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 2.340757] scsi2 : pata_via [ 2.340872] scsi3 : pata_via [ 2.343442] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.343445] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.505955] ata3.00: ATA-7: Maxtor 6L250R0, BAJ41G20, max UDMA/133 [ 2.505959] ata3.00: 490234752 sectors, multi 16: LBA48 [ 2.521783] ata3.00: configured for UDMA/133 [ 2.892349] ata4.00: ATAPI: SONY DVD RW DW-G120A, MYS1, max UDMA/66 [ 2.892368] ata4.01: ATAPI: SONY DVD RW DW-G120A, MYS2, max UDMA/66 [ 2.892379] ata4.00: limited to UDMA/33 due to 40-wire cable [ 2.892381] ata4.01: limited to UDMA/33 due to 40-wire cable [ 2.924224] ata4.00: configured for UDMA/33 [ 2.956217] ata4.01: configured for UDMA/33 [ 2.956269] isa bounce pool size: 16 pages [ 2.956360] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L250R0 BAJ4 PQ: 0 ANSI: 5 [ 2.958342] scsi 3:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS1 PQ: 0 ANSI: 5 [ 2.960357] scsi 3:0:1:0: CD-ROM SONY DVD RW DW-G120A MYS2 PQ: 0 ANSI: 5 [ 2.960770] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 2.960781] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 2.960793] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.960865] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 2.960916] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f900 [ 2.961118] usb usb1: configuration #1 chosen from 1 choice [ 2.961146] hub 1-0:1.0: USB hub found [ 2.961155] hub 1-0:1.0: 2 ports detected [ 3.168314] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 3.168327] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 3.168358] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 3.168382] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f800 [ 3.168483] usb usb2: configuration #1 chosen from 1 choice [ 3.168512] hub 2-0:1.0: USB hub found [ 3.168520] hub 2-0:1.0: 2 ports detected [ 3.376221] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 3.376233] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 3.376271] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 3.376296] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700 [ 3.376395] usb usb3: configuration #1 chosen from 1 choice [ 3.376424] hub 3-0:1.0: USB hub found [ 3.376432] hub 3-0:1.0: 2 ports detected [ 3.488013] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 3.584372] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 3.584386] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 3.584419] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 3.584445] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000f600 [ 3.584570] usb usb4: configuration #1 chosen from 1 choice [ 3.584601] hub 4-0:1.0: USB hub found [ 3.584610] hub 4-0:1.0: 2 ports detected [ 3.592311] scsi 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.592350] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 3.592386] scsi 3:0:1:0: Attached scsi generic sg2 type 5 [ 3.663539] usb 2-1: configuration #1 chosen from 1 choice [ 3.776017] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 3.792335] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 3.792356] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 3.792387] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 3.792446] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdfff000 [ 3.904015] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.904166] usb usb5: configuration #1 chosen from 1 choice [ 3.904200] hub 5-0:1.0: USB hub found [ 3.904211] hub 5-0:1.0: 8 ports detected [ 4.161222] Driver 'sd' needs updating - please use bus_type methods [ 4.161416] sd 2:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 4.161433] sd 2:0:0:0: [sda] Write Protect is off [ 4.161436] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.161466] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.161548] sd 2:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 4.161938] sd 2:0:0:0: [sda] Write Protect is off [ 4.161941] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.161974] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.161979] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 4.189438] sda1 sda2 < sda5 > [ 4.213706] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.228475] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.228484] Uniform CD-ROM driver Revision: 3.20 [ 4.228683] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 4.232887] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.233067] sr 3:0:1:0: Attached scsi CD-ROM sr1 [ 4.301022] usb 2-2: device not accepting address 3, error -71 [ 4.357055] hub 2-0:1.0: unable to enumerate USB device on port 2 [ 4.468081] usb 2-1: USB disconnect, address 2 [ 4.468258] usbcore: registered new interface driver hiddev [ 4.708016] usb 2-1: new low speed USB device using uhci_hcd and address 5 [ 4.882306] usb 2-1: configuration #1 chosen from 1 choice [ 5.124016] usb 2-2: new low speed USB device using uhci_hcd and address 6 [ 5.299147] usb 2-2: configuration #1 chosen from 1 choice [ 5.461129] input: 3Dconnexion SpaceNavigator as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/input/input2 [ 5.461267] input,hidraw0: USB HID v1.10 Multi-Axis Controller [3Dconnexion SpaceNavigator] on usb-0000:00:10.1-2 [ 5.461292] usbcore: registered new interface driver usbhid [ 5.461296] usbhid: v2.6:USB HID core driver [ 5.567508] PM: Starting manual resume from disk [ 5.567512] PM: Resume from partition 8:5 [ 5.567513] PM: Checking hibernation image. [ 5.567681] PM: Resume from disk failed. [ 5.614951] kjournald starting. Commit interval 5 seconds [ 5.614965] EXT3-fs: mounted filesystem with ordered data mode. [ 11.311197] udevd version 124 started [ 11.767498] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.806552] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.965045] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 11.989091] ACPI: Power Button (FF) [PWRF] [ 11.989203] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 12.021060] ACPI: Power Button (CM) [PWRB] [ 12.058565] parport_pc 00:0a: reported by Plug and Play ACPI [ 12.058655] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 12.583299] nvidia: module license 'NVIDIA' taints kernel. [ 12.872706] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.873184] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.11 Wed Nov 26 10:53:43 PST 2008 [ 13.021548] rt2500pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 13.037506] phy0: Selected rate control algorithm 'pid' [ 13.093226] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 13.093596] input: Wacom Bamboo1 as /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/input/input6 [ 13.184721] Registered led device: rt2500pci-phy0:radio [ 13.264873] usbcore: registered new interface driver wacom [ 13.266389] wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver [ 13.326791] logips2pp: Detected unknown logitech mouse model 90 [ 13.425929] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 13.425941] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 13.426118] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 13.803613] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input7 [ 15.282863] lp0: using parport0 (interrupt-driven). [ 15.481799] Adding 6016300k swap on /dev/sda5. Priority:-1 extents:1 across:6016300k [ 15.981365] EXT3 FS on sda1, internal journal [ 16.964649] type=1505 audit(1239205820.817:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4155 [ 17.167409] type=1505 audit(1239205821.021:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4160 [ 17.167749] type=1505 audit(1239205821.021:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4160 [ 17.269796] type=1505 audit(1239205821.125:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4164 [ 17.401380] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.260244] wlan0: authenticate with AP 00:18:4d:64:09:b6 [ 18.261618] wlan0: authenticated [ 18.261624] wlan0: associate with AP 00:18:4d:64:09:b6 [ 18.263684] wlan0: RX AssocResp from 00:18:4d:64:09:b6 (capab=0x431 status=0 aid=2) [ 18.263687] wlan0: associated [ 18.762265] NET: Registered protocol family 17 [ 22.879426] NET: Registered protocol family 10 [ 22.880185] lo: Disabled Privacy Extensions [ 23.710293] ACPI: WMI: Mapper loaded [ 24.714413] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 27.012929] ppdev: user-space parallel port driver [ 32.915743] Bluetooth: Core ver 2.13 [ 32.916494] NET: Registered protocol family 31 [ 32.916497] Bluetooth: HCI device and connection manager initialized [ 32.916504] Bluetooth: HCI socket layer initialized [ 32.934493] Bluetooth: L2CAP ver 2.11 [ 32.934500] Bluetooth: L2CAP socket layer initialized [ 32.977922] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 32.977929] Bluetooth: BNEP filters: protocol multicast [ 33.165770] Bluetooth: RFCOMM socket layer initialized [ 33.165809] Bluetooth: RFCOMM TTY layer initialized [ 33.165812] Bluetooth: RFCOMM ver 1.10 [ 33.179950] Bridge firewalling registered [ 33.196291] Bluetooth: SCO (Voice Link) ver 0.6 [ 33.196298] Bluetooth: SCO socket layer initialized [ 33.457009] wlan0: no IPv6 routers present [ 35.934408] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 35.934424] agpgart: Xorg tried to set rate=x0. Setting to AGP3 x4 mode. [ 35.934430] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 4x mode [ 35.934505] nvidia 0000:01:00.0: putting AGP V3 device into 4x mode [ 37.328831] eth0: link down [ 37.329720] ADDRCONF(NETDEV_UP): eth0: link is not ready