Hello.
I have a SiL based PCI-E card and a PMP:
02:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
I'm using Ubuntu 8.10 kernel 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39
UTC 2009 i686 GNU/Linux
I'm running into all kinds of weird behaviour, like only P1 (port 1 out of
5) on the PMP working with single drive. Also, it seems to differ whether
I have a WD or Samsung drive, the WD drive works alone in P1 and P2 of the
PMP, with the Samsung drive only working alone in P1. If I put the Samsung
drive in P1 and put the WD drive in P3, the P3 drive isn't recognised upon
hotplug. If I unplug Samsung P1 drive and re-insert it in the same P1
hotswat bay again, drives in both P1 and P3 are recognised upon P1
spinning up and being recognised.
Is this a known problem?
This is perfectly reproducible, I can provide logs if that would help. I'm
also willing to try 2.6.29.x if there has been work done after 2.6.27.
--
Mikael Abrahamsson email: swmike@xxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
