Linux IDE Archive

• Thread Index

• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Robert Hancock
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• Re: [PATCH] pata-rb532-cf: platform_get_irq() failure ignored
  • From: Phil Sutter
• [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Mark Lord
• [git patches] libata fixes
  • From: Jeff Garzik
• IDE subsystem status report
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH #upstream-fixes, -stable] ata_piix: add workaround for Samsung DB-P70
  • From: Jeff Garzik
• Re: [PATCH] libata: Keep shadow last_ctl up to date during resets
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_mv fix MSI irq race condition
  • From: Jeff Garzik
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Frans Pop
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Robert Hancock
• Re: [PATCH] pata-rb532-cf: platform_get_irq() failure ignored
  • From: Florian Fainelli
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Mark Lord
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Frans Pop
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• RE: ATAPI question
  • From: Foster, Doug F
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Borislav Petkov
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Mark Lord
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Mark Lord
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Frans Pop
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Mark Lord
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Mark Lord
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Mark Lord
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Frans Pop
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Borislav Petkov
• Re: segate drives are not getting detected in SIL3114 and promise card
  • From: Robert Hancock
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Robert Hancock
• segate drives are not getting detected in SIL3114 and promise card
  • From: Sagar Borikar
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• Re: [patch 1/3] libata: change drive ready wait after hard reset to 5s
  • From: Tejun Heo
• Re: sata EH on boot
  • From: Robert Hancock
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Robert Hancock
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Bartlomiej Zolnierkiewicz
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• Re: [PATCH] ide: add support for CFA specified transfer modes (take 3)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: move ide_map_sg() call out of ->dma_setup method (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 08/10] ide: move ide_map_sg() call out from ->dma_setup method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: add support for CFA specified transfer modes (take 3)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: move ide_map_sg() call out of ->dma_setup method (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH 08/10] ide: move ide_map_sg() call out from ->dma_setup method
  • From: Sergei Shtylyov
• Re: [PATCH] ide: add support for CFA specified transfer modes (take 3)
  • From: Sergei Shtylyov
• Re: [PATCH 08/10] ide: move ide_map_sg() call out from ->dma_setup method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 07/10] ide: add ->dma_check method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: add support for CFA specified transfer modes (take 3)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-iops: only clear DMA words on setting DMA mode
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Bartlomiej Zolnierkiewicz
• RE: [patch 1/3] libata: change drive ready wait after hard reset to 5s
  • From: Stuart_Hayes
• RE: [patch 1/3] libata: change drive ready wait after hard reset to 5s
  • From: Stuart_Hayes
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Mark Lord
• Re: [PATCH] libata: Keep shadow last_ctl up to date during resets
  • From: Tejun Heo
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Frans Pop
• Re: [PATCH,v2][0/2] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: Frans Pop
• Re: [PATCH,v2][0/2] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: Mark Lord
• Re: [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Mark Lord
• Re: [PATCH,v2][0/2] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: Mark Lord
• Re: [PATCH] libata: Keep shadow last_ctl up to date during resets
  • From: Mark Lord
• Re: ATAPI question
  • From: Tejun Heo
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Alan Cox
• Re: [PATCH] libata: Keep shadow last_ctl up to date during resets
  • From: Tejun Heo
• Re: [patch 1/3] libata: change drive ready wait after hard reset to 5s
  • From: Tejun Heo
• Re: sata EH on boot
  • From: Tejun Heo
• [PATCH,v2][2/2] sata-mv: add module parameter msq_blink_led to enable quirk for GenIIe
  • From: Frans Pop
• [PATCH,v2][1/2] sata-mv: enable HDD led blinking when NCQ is active for GenIIe
  • From: Frans Pop
• [PATCH,v2][0/2] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: Frans Pop
• [PATCH 04/03] sata_mv optimize IRQ coalescing for 8-port chips
  • From: Mark Lord
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• Re: Off-by-one in both LIBATA and IDE drivers
  • From: Jim Paris
• [PATCH 03/03] sata_mv implement IRQ coalescing (v2)
  • From: Mark Lord
• Off-by-one in both LIBATA and IDE drivers
  • From: Norman Diamond
• Re: [PATCH 03/03] sata_mv implement IRQ coalescing
  • From: Mark Lord
• Re: Per ATA host sysfs attributes?
  • From: Jeff Garzik
• Re: [PATCH 03/03] sata_mv implement IRQ coalescing
  • From: Grant Grundler
• [PATCH 03/03] sata_mv implement IRQ coalescing
  • From: Mark Lord
• [PATCH 02/03] sata_mv cosmetic preparations for IRQ coalescing
  • From: Mark Lord
• [PATCH 01/03] sata_mv Fix MSI irq race
  • From: Mark Lord
• [PATCH #upstream-fixes] sata_mv fix MSI irq race condition
  • From: Mark Lord
• Re: [PATCH] ide: add support for CFA specified transfer modes (take 3)
  • From: Stanislaw Gruszka
• Per ATA host sysfs attributes?
  • From: Mark Lord
• [PATCH] ide: add support for CFA specified transfer modes (take 3)
  • From: Sergei Shtylyov
• [PATCH] ide-iops: only clear DMA words on setting DMA mode
  • From: Sergei Shtylyov
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [RFC][PATCH] sata-mv: add module parameter msq_blink_led to enable quirk for SOC
  • From: Frans Pop
• Re: [RFC][PATCH] sata-mv: add module parameter msq_blink_led to enable quirk for SOC
  • From: Frans Pop
• Re: [RFC][PATCH] sata-mv: add module parameter msq_blink_led to enable quirk for SOC
  • From: Mark Lord
• Re: [RFC][PATCH] sata-mv: add module parameter msq_blink_led to enable quirk for SOC
  • From: Martin Michlmayr
• Re: [RFC][PATCH] sata-mv: add module parameter msq_blink_led to enable quirk for SOC
  • From: Mark Lord
• Re: [PATCH 09/10] ide: set/clear drive->waiting_for_dma flag in the core code
  • From: Sergei Shtylyov
• [PATCH] ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 2)
  • From: Sergei Shtylyov
• [PATCH] libata: Keep shadow last_ctl up to date during resets
  • From: Stuart MENEFY
• [RFC][PATCH] sata-mv: add module parameter msq_blink_led to enable quirk for SOC
  • From: Frans Pop
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Borislav Petkov
• RE: ATAPI question
  • From: Foster, Doug F
• meeting minutes 090308
  • From: gettinther
• Re: Getting TRIM working
  • From: Matthew Wilcox
• Re: [PATCH] remove stale comment from <linux/hdreg.h>
  • From: Sergei Shtylyov
• Re: [PATCH 08/10] ide: move ide_map_sg() call out from ->dma_setup method
  • From: Sergei Shtylyov
• Re: [PATCH 04/10] ide: add ide_dma_prepare() helper
  • From: Sergei Shtylyov
• Re: Getting TRIM working
  • From: Matthew Wilcox
• Re: Getting TRIM working
  • From: James Bottomley
• Re: Getting TRIM working
  • From: James Bottomley
• INCITS
  • From: Matthew Wilcox
• Re: [PATCH 03/10] ide: destroy DMA mappings after ending DMA
  • From: Sergei Shtylyov
• Re: Getting TRIM working
  • From: Douglas Gilbert
• Re: Getting TRIM working
  • From: Matthew Wilcox
• Re: [PATCH 07/10] ide: add ->dma_check method
  • From: Sergei Shtylyov
• Re: [PATCH 06/10] trm290: use custom ->dma_{start,end} to handle trm290_prepare_drive()
  • From: Sergei Shtylyov
• Re: [PATCH 05/10] ns87415: use custom ->dma_{start,end} to handle ns87415_prepare_drive()
  • From: Sergei Shtylyov
• Re: [PATCH 02/10] ide: inline ide_dma_timeout() into ide_dma_timeout_retry()
  • From: Sergei Shtylyov
• Re: [PATCH 01/10] ide: add ->dma_clear method and remove ->dma_timeout one
  • From: Sergei Shtylyov
• Re: Getting TRIM working
  • From: James Bottomley
• Re: Getting TRIM working
  • From: James Bottomley
• Re: [PATCH 2/2] ide: add support for CFA specified transfer modes
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] ide: add support for CFA specified transfer modes (take 2)
  • From: Sergei Shtylyov
• Re: Getting TRIM working
  • From: Boaz Harrosh
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Bartlomiej Zolnierkiewicz
• Re: Getting TRIM working
  • From: Matthew Wilcox
• Re: [PATCH 2/2] ide: add support for CFA specified transfer modes (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] ide: add support for CFA specified transfer modes
  • From: Bartlomiej Zolnierkiewicz
• Re: Getting TRIM working
  • From: Boaz Harrosh
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Borislav Petkov
• Re: [PATCH 2/2] ide: add support for CFA specified transfer modes (take 2)
  • From: Sergei Shtylyov
• [PATCH 2/2] ide: add support for CFA specified transfer modes (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] ide: add support for CFA specified transfer modes
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] ide: add support for CFA specified transfer modes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH resend] au1xxx-ide: auide_{in|out}sw() should be static
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: Getting TRIM working
  • From: Matthew Wilcox
• LS-120 eject does not work with libata
  • From: Ondrej Zary
• Re: [PATCH] pata-rb532-cf: platform_get_irq() failure ignored
  • From: Phil Sutter
• [PATCH resend] au1xxx-ide: auide_{in|out}sw() should be static
  • From: Sergei Shtylyov
• [PATCH] ay1xxx-ide: auide_{in|out}sw() should be static
  • From: Sergei Shtylyov
• Re: SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: Jeff Garzik
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Thomas Gleixner
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Ingo Molnar
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Borislav Petkov
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Bartlomiej Zolnierkiewicz
• Re: [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: add CFA specific identify data words
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] libata: add CFA specific identify data words
  • From: Jeff Garzik
• [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Borislav Petkov
• Re: [PATCH] ide-iops: fix odd-length ATAPI PIO transfers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/3] ide: allow to wrap interrupt handler
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3 v4] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-iops: fix odd-length ATAPI PIO transfers
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Borislav Petkov
• Re: [PATCH 1/6] ide: merge ->atapi_*put_bytes and ->ata_*put_data methods
  • From: Sergei Shtylyov
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 2/3] ide-floppy: use ide_pio_bytes()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata-rb532-cf: platform_get_irq() failure ignored
  • From: Jeff Garzik
• Re: SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: FUJITA Tomonori
• Re: [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Bartlomiej Zolnierkiewicz
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Thomas Gleixner
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: FUJITA Tomonori
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Jens Axboe
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Ingo Molnar
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Jens Axboe
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Ingo Molnar
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: FUJITA Tomonori
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Jens Axboe
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: FUJITA Tomonori
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Ingo Molnar
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Jens Axboe
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Jens Axboe
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: FUJITA Tomonori
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: FUJITA Tomonori
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: FUJITA Tomonori
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: James Bottomley
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: James Bottomley
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Thomas Gleixner
• Re: [PATCH #upstream-fixes,-stable] libata: make sure port is thawed when skipping resets
  • From: Stefan Lippers-Hollmann
• [patch 1/1] pata-rb532-cf: platform_get_irq() failure ignored
  • From: akpm
• [patch 3/3] ahci: add the Device IDs for MCP89 and remove IDs of MCP7B to/from ahci.c
  • From: akpm
• [patch 1/3] libata: change drive ready wait after hard reset to 5s
  • From: akpm
• [patch 2/3] libata: fix dma_unmap_sg misuse
  • From: akpm
• Re: Mysteriously slow writes SiI 3124
  • From: Greg Freemyer
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: James Bottomley
• Re: [PATCH 09/15] ide: add "flagged" taskfile flags to struct ide_taskfile
  • From: Sergei Shtylyov
• Re: Mysteriously slow writes SiI 3124
  • From: Peter Rabbitson
• Re: Mysteriously slow writes SiI 3124
  • From: Grant Grundler
• Re: ATAPI question
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes, -stable] ata_piix: add workaround for Samsung DB-P70
  • From: Mark Lord
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Mark Lord
• RE: ATAPI question
  • From: Foster, Doug F
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: Missing support for Intel Corporation 6300ESB PATA Storage Controller [8086:25a2] (rev 02)
  • From: Robin H. Johnson
• Missing support for Intel Corporation 6300ESB PATA Storage Controller [8086:25a2] (rev 02)
  • From: Robin H. Johnson
• Re: Getting TRIM working
  • From: Boaz Harrosh
• [PATCH 1/3] ide-{floppy,tape}: fix padding for PIO transfers
  • From: Borislav Petkov
• [PATCH 3/3] ide-{cd,floppy}: do not map all cmds to an sg
  • From: Borislav Petkov
• [PATCH 2/3] ide-floppy: use ide_pio_bytes()
  • From: Borislav Petkov
• [PATCH 0/3] some ide fixes
  • From: Borislav Petkov
• sata EH on boot
  • From: Meelis Roos
• Re: [PATCH] ide-cd: unsigned len subtracted below 0?
  • From: Borislav Petkov
• Re: Mysteriously slow writes SiI 3124
  • From: Peter Rabbitson
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Jeff Garzik
• [PATCH #upstream-fixes,-stable] libata: make sure port is thawed when skipping resets
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: add CFA specific identify data words
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes, -stable] ata_piix: add workaround for Samsung DB-P70
  • From: Tejun Heo
• Re: ATAPI question
  • From: Robert Hancock
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: Thomas Gleixner
• Re: ATAPI question
  • From: Tejun Heo
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Tejun Heo
• [PATCH] ide-cd: unsigned len subtracted below 0?
  • From: Roel Kluin
• Re: [BUG] 2.6.29-rc6-2450cf in scsi_lib.c (was: Large amount of scsi-sgpool)objects
  • From: James Bottomley
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Chuck Ebbert
• Getting TRIM working
  • From: Matthew Wilcox
• RE: ATAPI question
  • From: Foster, Doug F
• Re: [PATCH 2/2] ide: add support for CFA specified transfer modes
  • From: Sergei Shtylyov
• [PATCH 2/2] ide: add support for CFA specified transfer modes
  • From: Sergei Shtylyov
• [PATCH 1/2] libata: add CFA specific identify data words
  • From: Sergei Shtylyov
• Re: SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: Jeff Garzik
• Re: SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: James Bottomley
• Re: SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: Mark Lord
• Re: SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: Jeff Garzik
• RE: ATAPI question
  • From: Foster, Doug F
• Re: SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: Mark Lord
• Re: SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: Jeff Garzik
• SATA "target mode" (or "Channel-to-Channel" comm mode)
  • From: Mark Lord
• Re: [PATCH #upstream-fixes, -stable] ata_piix: add workaround for Samsung DB-P70
  • From: Mark Lord
• [PATCH] pata-rb532-cf: platform_get_irq() failure ignored
  • From: Roel Kluin
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• [PATCH] ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 2)
  • From: Sergei Shtylyov
• [PATCH #upstream-fixes, -stable] ata_piix: add workaround for Samsung DB-P70
  • From: Tejun Heo
• Re: [PATCH v2] libata: Don't trust current capacity values in identify words 57-58
  • From: Robert Hancock
• Re: ATAPI question
  • From: Tejun Heo
• Re: ATAPI question
  • From: Robert Hancock
• RE: ATAPI question
  • From: Foster, Doug F
• Re: [PATCH] ide: identify data word 53 bit 1 doesn't cover words 62 and 63
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v4] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Andrew Victor
• [PATCH] ide: identify data word 53 bit 1 doesn't cover words 62 and 63
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v4] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Bartlomiej Zolnierkiewicz
• RE: ATAPI question
  • From: Foster, Doug F
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Sergei Shtylyov
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Sergei Shtylyov
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Sergei Shtylyov
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Sergei Shtylyov
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Sergei Shtylyov
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Roel Kluin
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Sergei Shtylyov
• ide_timer_expiry() - shouldn't 'wait' be int?
  • From: Roel Kluin
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Mark Lord
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• [PATCH #upstream-fixes 2/2] libata: don't use on-stack sense buffer
  • From: Tejun Heo
• [PATCH #upstream-fixes 1/2] libata: align ap->sector_buf
  • From: Tejun Heo
• Re: Backplane mystery
  • From: Tejun Heo
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Robert Hancock
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• Mysteriously slow writes SiI 3124
  • From: Peter Rabbitson
• Re: libata timeouts when stressing a Samsung HDD
  • From: Alan Cox
• Re: [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: libata timeouts when stressing a Samsung HDD
  • From: Robert Hancock
• Re: 2.6.28.7 boot problems
  • From: Robert Hancock
• Re: [PATCH 3/3 v4] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Can I set 8KB hardware sector size in blk_queue_hardsect_size() ?
  • From: Gao, Yunpeng
• Re: [RFC][PATCH] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: Frans Pop
• Re: ATAPI question
  • From: Tejun Heo
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Tejun Heo
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Robert Hancock
• Re: [RFC][PATCH] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: Martin Michlmayr
• Re: 2.6.28.7 boot problems
  • From: Andrew Schepler
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Alan Cox
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• Re: 2.6.28.7 boot problems
  • From: Andrew Schepler
• Re: ahci 0000:00:1f.2: DMA-API: device driver maps memory from stack
  • From: Robert Hancock
• Re: ahci 0000:00:1f.2: DMA-API: device driver maps memory from stack
  • From: FUJITA Tomonori
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Robert Hancock
• Re: 2.6.28.7 boot problems
  • From: Robert Hancock
• Re: ATAPI question
  • From: Robert Hancock
• Re: ahci 0000:00:1f.2: DMA-API: device driver maps memory from stack
  • From: Robert Hancock
• ATAPI question
  • From: Foster, Doug F
• ahci 0000:00:1f.2: DMA-API: device driver maps memory from stack
  • From: Chuck Ebbert
• Re: DRDY ata message > 2.6.24.7-rt14, not before.
  • From: Avuton Olrich
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Chuck Ebbert
• Re: DRDY ata message > 2.6.24.7-rt14, not before.
  • From: Jeff Garzik
• Re: sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Mikael Pettersson
• DRDY ata message > 2.6.24.7-rt14, not before.
  • From: Avuton Olrich
• Re: Backplane mystery
  • From: Yan Seiner
• [PATCH] ahci: Add the Device IDs for MCP89 and remove IDs of MCP7B to/from ahci.c
  • From: peerchen
• [PATCH] libata: fix dma_unmap_sg misuse
  • From: FUJITA Tomonori
• Re: [PATCH 0/10] ide: flags query macros
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/10] ide: flags query macros
  • From: Borislav Petkov
• Re: [PATCH 0/10] ide: flags query macros
  • From: Bartlomiej Zolnierkiewicz
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• hdparm-9.12 released
  • From: Mark Lord
• Re: Backplane mystery
  • From: Mark Lord
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Backplane mystery
  • From: Yan Seiner
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: Karel Zak
• Re: ATA support for 4k sector size
  • From: Matthew Wilcox
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Matthew Wilcox
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Theodore Tso
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Tejun Heo
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: david
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: david
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Chuck Ebbert
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• [PATCH 2/2] ata: Add support for Long Logical Sectors and Long Physical Sectors
  • From: Matthew Wilcox
• ATA support for 4k sector size
  • From: Matthew Wilcox
• [PATCH 1/2] ata: Define new commands from ATA8
  • From: Matthew Wilcox
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Mark Lord
• 2.6.28.7 boot problems
  • From: Andrew Schepler
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [patch for 2.6.29? 3/4] pata_legacy: for VLB 32bit PIO don't try tricks with slop
  • From: Jeff Garzik
• Re: [patch for 2.6.29? 2/4] pata_amd: program FIFO
  • From: Jeff Garzik
• Re: linux-next: Tree for February 24 (ide-atapi/ide-cd build errors)
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch for 2.6.29? 4/4] pata_it821x: resume from hibernation fails with RAID volume
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: fix SoC interrupt breakage
  • From: Jeff Garzik
• Re: [PATCH 01/06] sata_mv: cache frequently read registers
  • From: Jeff Garzik
• Re: sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Mikael Pettersson
• [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Mike Cui
• Re: [PATCH 01/06] sata_mv: cache frequently read registers
  • From: Mark Lord
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Mark Lord
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Mark Lord
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• Re: Bad module reference counter
  • From: Stanislaw Gruszka
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Tomasz Chmielewski
• Re: sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Tejun Heo
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Tejun Heo
• sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Mike Cui
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Mark Lord
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Chuck Ebbert
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Tomasz Chmielewski
• Re: linux-next: Tree for February 24 (ide-atapi/ide-cd build errors)
  • From: Randy Dunlap
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Mark Lord
• Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• Re: [RFC][PATCH] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: saeed bishara
• [RFC][PATCH] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: Frans Pop
• [PATCH] ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/6] ide: more unifications of ATA and ATAPI support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: fix locking in drive_release_dev()
  • From: Bartlomiej Zolnierkiewicz
• Re: Bad module reference counter
  • From: Bartlomiej Zolnierkiewicz
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Tomasz Chmielewski
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Greg Freemyer
• strange hdparm results with serverworks and pata-serverworks
  • From: Tomasz Chmielewski
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Mark Lord
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Martin K. Petersen
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Martin K. Petersen
• Re: [PATCH #upstream-fixes] sata_promise: request follow-up SRST - it works
  • From: Peter Favrholdt
• Re: Synopsis SATA AHCI support
  • From: Sagar Borikar
• Re: [PATCH 0/10] ide: flags query macros
  • From: Borislav Petkov
• Re: [PATCH 0/10] ide: flags query macros
  • From: Sam Ravnborg
• Re: help! locks problem in block layer request queue?
  • From: Jens Axboe
• Re: [PATCH 0/10] ide: flags query macros
  • From: Borislav Petkov
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: FUJITA Tomonori
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Mark Lord
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Chuck Ebbert
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Michael Tokarev
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Robert Hancock
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Wes Shull
• RE: help! locks problem in block layer request queue?
  • From: Gao, Yunpeng
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: FUJITA Tomonori
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• [PATCH] hdparm: Show form factor and media rotation rate
  • From: Martin K. Petersen
• Re: no hotplugging support (FIXME)
  • From: Alan Cox
• no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: General question (scheduler) with SSDs?
  • From: Kay Sievers
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• [PATCH] remove stale comment from <linux/hdreg.h>
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ide: merge ide_arm and ide_generic host drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide-generic: remove no longer needed sysfs interface
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/10] ide: sanitize ide_build_sglist() and ide_destroy_dmatable()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/10] ide: set/clear drive->waiting_for_dma flag in the core code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/10] ide: move ide_map_sg() call out from ->dma_setup method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/10] ide: add ->dma_check method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/10] trm290: use custom ->dma_{start,end} to handle trm290_prepare_drive()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/10] ns87415: use custom ->dma_{start,end} to handle ns87415_prepare_drive()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/10] ide: add ide_dma_prepare() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/10] ide: destroy DMA mappings after ending DMA
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/10] ide: inline ide_dma_timeout() into ide_dma_timeout_retry()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/10] ide: add ->dma_clear method and remove ->dma_timeout one
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/10] ide: DMA methods cleanups/sanitizations
  • From: Bartlomiej Zolnierkiewicz
• Re: General question (scheduler) with SSDs?
  • From: Kay Sievers
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: General question (scheduler) with SSDs?
  • From: Kay Sievers
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Wes Shull
• Re: General question (scheduler) with SSDs?
  • From: Kay Sievers
• Re: Bad module reference counter
  • From: Stanislaw Gruszka
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: General question (scheduler) with SSDs?
  • From: Justin Piszcz
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Robert Hancock
• Re: libata timeouts when stressing a Samsung HDD
  • From: Robert Hancock
• Re: Synopsis SATA AHCI support
  • From: Tejun Heo
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• [PATCH] ide: remove ide_execute_pkt_cmd() (v2)
  • From: Bartlomiej Zolnierkiewicz
• Re: Bad module reference counter
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: Bartlomiej Zolnierkiewicz
• Re: libata timeouts when stressing a Samsung HDD
  • From: Greg Freemyer
• [PATCH] sata_mv: fix SoC interrupt breakage
  • From: Mark Lord
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• Re: Synopsis SATA AHCI support
  • From: Sagar Borikar
• Re: General question (scheduler) with SSDs?
  • From: Pádraig Brady
• General question (scheduler) with SSDs?
  • From: Justin Piszcz
• Re: help! locks problem in block layer request queue?
  • From: Jens Axboe
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: FUJITA Tomonori
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: FUJITA Tomonori
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: FUJITA Tomonori
• Re: Bad module reference counter
  • From: Stanislaw Gruszka
• help! locks problem in block layer request queue?
  • From: Gao, Yunpeng
• Re: Storage-Fixup-Entry
  • From: Tejun Heo
• Re: Add to storage-fixup.conf
  • From: Tejun Heo
• Re: SATA II generation controllers reset problem
  • From: Tejun Heo
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Tejun Heo
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: Tejun Heo
• Re: Synopsis SATA AHCI support
  • From: Tejun Heo
• Re: [PATCH] ide-cd: minor ide_cdrom_setup() cleanup
  • From: Borislav Petkov
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• Synopsis SATA AHCI support
  • From: Sagar Borikar
• Re: [PATCH] ide-cd: minor ide_cdrom_setup() cleanup
  • From: Sergei Shtylyov
• initramfs-tools 0.93 status report
  • From: maximilian attems
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: Chuck Ebbert
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Chuck Ebbert
• Re: Bad module reference counter
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cd: document capacity hack
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Chuck Ebbert
• Re: [PATCH] ide-cd: document capacity hack
  • From: Sergei Shtylyov
• [PATCH 2/2] ide-floppy: use ide_pio_bytes()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide-{floppy,tape}: fix padding for PIO transfers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] it821x: remove dead URL
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-cd: minor ide_cdrom_setup() cleanup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-cd: document capacity hack
  • From: Bartlomiej Zolnierkiewicz
• Re: linux-next: Tree for February 12 (ide)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] atiixp: missing parentheses?
  • From: Bartlomiej Zolnierkiewicz
• [Bug 12734] ide-iops.c insists on doing 80-wire check
  • From: bugme-daemon
• Re: linux-next: Tree for February 12 (ide)
  • From: Randy Dunlap
• [PATCH 3/3 v4] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• [Bug 12734] ide-iops.c insists on doing 80-wire check
  • From: bugme-daemon
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [BUG] 2.6.29-rc2-git1 to -rc5: libata lockup on boot, LED solid, 100% CPU
  • From: Andreas Mohr
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Sergei Shtylyov
• Re: [PATCH] atiixp: missing parentheses?
  • From: Roel Kluin
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH] atiixp: missing parentheses?
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/10] ide: flags query macros
  • From: Bartlomiej Zolnierkiewicz
• Re: linux-next: Tree for February 12 (ide)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one
  • From: Sergei Shtylyov
• Re: [PATCH] atiixp: missing parentheses?
  • From: Sergei Shtylyov
• Re: [PATCH] atiixp: missing parentheses?
  • From: Sergei Shtylyov
• Re: [PATCH 2/3 v2] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] atiixp: missing parentheses?
  • From: Roel Kluin
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH v2] libata: Don't trust current capacity values in identify words 57-58
  • From: Sergei Shtylyov
• Re: [PATCH] amd74xx: fix typo in drivers/ide/amd74xx.c
  • From: Sergei Shtylyov
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: FUJITA Tomonori
• Re: [Bug #12263] Sata soft reset filling log
  • From: Hugh Dickins
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: [PATCH] amd74xx: fix typo in drivers/ide/amd74xx.c
  • From: Jeff Garzik
• [PATCH] amd74xx: fix typo in drivers/ide/amd74xx.c
  • From: Wei Yongjun
• [PATCH] fix dma_unmap_sg misuse
  • From: FUJITA Tomonori
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Robert Hancock
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Mark Lord
• [PATCH v2] libata: Don't trust current capacity values in identify words 57-58
  • From: Robert Hancock
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] libata-sff: fix 32-bit PIO ATAPI regression
  • From: Sergei Shtylyov
• Re: [PATCH 01/06] sata_mv: cache frequently read registers
  • From: Jeff Garzik
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH #upstream] ahci/sata_vsc: drop intx manipulation on msi enable
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_nv: give up hardreset on nf2
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata-sff: fix 32-bit PIO ATAPI regression
  • From: Jeff Garzik
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Robert Hancock
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Mark Lord
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Mark Lord
• Re: [PATCH 0/10] ide: flags query macros
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/10] ide: add flags query macros
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: device/vendor confusion
  • From: Bartlomiej Zolnierkiewicz
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Chuck Ebbert
• Re: libata timeouts when stressing a Samsung HDD
  • From: Chuck Ebbert
• Re: [BUG] 2.6.29-rc2-git1 to -rc5: libata lockup on boot, LED solid, 100% CPU
  • From: Mikael Pettersson
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Sergei Shtylyov
• [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Robert Hancock
• [BUG] 2.6.29-rc2-git1 to -rc5: libata lockup on boot, LED solid, 100% CPU
  • From: Andreas Mohr
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Ingo Molnar
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: Promise SATA error-handling not quite working (2.6.29-rc4)
  • From: Mikael Pettersson
• Re: [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths
  • From: Borislav Petkov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Borislav Petkov
• Re: Drives which perform frequent head unloads under Linux
  • From: Tejun Heo
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• [Bug 12714] [pata_ali] ATAPI UltraDMA on secondary channel broken
  • From: bugme-daemon
• [PATCH 20/20] ide-cd: unify transfer padding in cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/20] ide-cd: use common completion path for DMA requests in cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/20] ide-cd: use scatterlists for PIO transfers (non-fs requests)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/20] ide-cd: merge ide_cd_prepare_rw_request() into cdrom_start_rw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/20] ide-cd: fix non-SECTOR_SIZE-multiples PIO transfers for fs requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/20] ide-cd: use scatterlists for PIO transfers (fs requests)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/20] ide-cd: cleanup ide_cd_do_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/20] ide-cd: kill whole failed request in ide_cd_do_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/20] ide-cd: remove cdrom_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/20] ide-cd: move setting REQ_FAILED flag out from 'end_request' exit path
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/20] ide-cd: unify ide_cd_do_request() exit paths
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/20] ide-cd: factor out failed request completion from cdrom_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/20] ide-cd: remove no longer needed 'ignore' module parameter
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/20] ide: remove needless ide_dump_status_no_sense() wrapper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/20] ide-cd: remove dead code from cdrom_decode_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/20] ide-cd: use ide_end_rq() also for failed non-fs requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/20] ide-cd: remove dead URLs
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/20] ide: use PageHighMem() instead of ifdefs in ide_pio_bytes()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/20] ide: add support for arbitrary transfer lengths to ide_pio_bytes()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/20] ide-cd: use scatterlists also for PIO transfers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Promise SATA error-handling not quite working (2.6.29-rc4)
  • From: George Spelvin
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Rafael J. Wysocki
• Re: [PATCH] ide: device/vendor confusion
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Ingo Molnar
• [Bug 12714] New: [pata_ali] ATAPI UltraDMA on secondary channel broken
  • From: bugme-daemon
• [PATCH] ide: device/vendor confusion
  • From: Roel Kluin
• Re: [Bug #12263] Sata soft reset filling log
  • From: Rafael J. Wysocki
• Re: [PATCH 01/10] ide: add flags query macros
  • From: Sam Ravnborg
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Sergei Shtylyov
• Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Jeff Garzik
• [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Sergei Shtylyov
• [PATCH 2/2] libata-sff: avoid byte swapping in ata
  • From: Sergei Shtylyov
• [PATCH 1/2] libata-sff: fix 32-bit PIO ATAPI regression
  • From: Sergei Shtylyov
• Re: [PATCH 01/10] ide: add flags query macros
  • From: Borislav Petkov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Borislav Petkov
• Re: [PATCH 2/3 v2] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 01/10] ide: add flags query macros
  • From: Sam Ravnborg
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Sergei Shtylyov
• [PATCH 06/10] ide-disk: use flags query macros
  • From: Borislav Petkov
• [PATCH 10/10] ide: use flags query macros in the remaining ide code
  • From: Borislav Petkov
• [PATCH 08/10] ide-eh: use flags query macros
  • From: Borislav Petkov
• [PATCH 07/10] ide-devsets: use flags query macros
  • From: Borislav Petkov
• [PATCH 05/10] ide-atapi: use flags query macros
  • From: Borislav Petkov
• [PATCH 02/10] ide-cd: use flags query macros
  • From: Borislav Petkov
• [PATCH 09/10] ide-probe: use flags query macros
  • From: Borislav Petkov
• [PATCH 04/10] ide-tape: use flags query macros
  • From: Borislav Petkov
• [PATCH 01/10] ide: add flags query macros
  • From: Borislav Petkov
• [PATCH 0/10] ide: flags query macros
  • From: Borislav Petkov
• [PATCH 03/10] ide-floppy: use flags query macros
  • From: Borislav Petkov
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Douglas Gilbert
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Mark Lord
• [Bug #12263] Sata soft reset filling log
  • From: Rafael J. Wysocki
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Maciej W. Rozycki
• SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: Intel ICH9M/M-E SATA error-handling/reset problems
  • From: Jeff Garzik
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Robert Hancock
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Sergei Shtylyov
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Maciej W. Rozycki
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Mark Lord
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Sergei Shtylyov
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Hanno Böck
• Storage-Fixup-Entry
  • From: Lukas Wymann
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Robert Hancock
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: EXPORT_SYMBOL_GPL(ata_pio_sectors) ?
  • From: Mark Lord
• [PATCH 06/06] sata_mv: implement mv_qc_issue_fis() for errata workaround
  • From: Mark Lord
• [PATCH 05/06] sata_mv: export ata_pio_queue_task()
  • From: Mark Lord
• [PATCH 04/06] sata_mv: implement mv_sff_check_status
  • From: Mark Lord
• [PATCH 03/06] sata_mv: stricter irq masking
  • From: Mark Lord
• [PATCH 02/06] sata_mv: enable ATAPI DMA for GEN_IIE chips
  • From: Mark Lord
• [PATCH 01/06] sata_mv: cache frequently read registers
  • From: Mark Lord
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Robert Hancock
• Re: EXPORT_SYMBOL_GPL(ata_pio_sectors) ?
  • From: Jeff Garzik
• sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Chuck Ebbert
• EXPORT_SYMBOL_GPL(ata_pio_sectors) ?
  • From: Mark Lord
• Re: linux-next: Tree for February 12 (ide)
  • From: Randy Dunlap
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• Re: The Linux Storage and Filesystem Summit Call for Proposals
  • From: James Bottomley
• RE: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Eyal Shani
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• SATA II generation controllers reset problem
  • From: Vladimir Krivopalov
• Re: Please add ST3120827AS 3.42 to NCQ blacklist
  • From: Robert Hancock
• Re: libata timeouts when stressing a Samsung HDD
  • From: Robert Hancock
• Re: Port Multiplier access with Sil 3124
  • From: Robert Hancock
• Re: [patch for 2.6.29? 2/4] pata_amd: program FIFO
  • From: Robert Hancock