Turn selectproc() method into dev_select() method by teaching it to write to the
device register and moving it from 'struct ide_port_ops' to 'struct ide_tp_ops'.
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
---
This patch is atop of the latest pata-2.6 series...
Changes since the first take:
- fixed compilation error in ns87415.c;
- added 'ide_dev_select' reference to 'default_tp_ops', fixing kernel oops;
- fixed checkpatch.pl error in trm290.c...
drivers/ide/ht6560b.c | 20 ++++++++++++++--
drivers/ide/ide-io-std.c | 13 ++++++++++
drivers/ide/ide-iops.c | 12 ---------
drivers/ide/ns87415.c | 22 +++++++++++++----
drivers/ide/pmac.c | 58 +++++++++++++++++++++++++++++++----------------
drivers/ide/qd65xx.c | 21 ++++++++++++++---
drivers/ide/trm290.c | 20 ++++++++++++----
drivers/ide/tx4939ide.c | 2 -
include/linux/ide.h | 5 +---
9 files changed, 125 insertions(+), 48 deletions(-)
Index: linux-2.6/drivers/ide/ht6560b.c
===================================================================
--- linux-2.6.orig/drivers/ide/ht6560b.c
+++ linux-2.6/drivers/ide/ht6560b.c
@@ -103,7 +103,7 @@
/*
* This routine is invoked from ide.c to prepare for access to a given drive.
*/
-static void ht6560b_selectproc (ide_drive_t *drive)
+static void ht6560b_dev_select(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
unsigned long flags;
@@ -143,6 +143,8 @@ static void ht6560b_selectproc (ide_driv
#endif
}
local_irq_restore(flags);
+
+ outb(drive->select | ATA_DEVICE_OBS, hwif->io_ports.device_addr);
}
/*
@@ -305,15 +307,29 @@ static int probe_ht6560b;
module_param_named(probe, probe_ht6560b, bool, 0);
MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
+static const struct ide_tp_ops ht6560b_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .write_devctl = ide_write_devctl,
+
+ .dev_select = ht6560b_dev_select,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = ide_input_data,
+ .output_data = ide_output_data,
+};
+
static const struct ide_port_ops ht6560b_port_ops = {
.init_dev = ht6560b_init_dev,
.set_pio_mode = ht6560b_set_pio_mode,
- .selectproc = ht6560b_selectproc,
};
static const struct ide_port_info ht6560b_port_info __initdata = {
.name = DRV_NAME,
.chipset = ide_ht6560b,
+ .tp_ops = &ht6560b_tp_ops,
.port_ops = &ht6560b_port_ops,
.host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */
IDE_HFLAG_NO_DMA |
Index: linux-2.6/drivers/ide/ide-io-std.c
===================================================================
--- linux-2.6.orig/drivers/ide/ide-io-std.c
+++ linux-2.6/drivers/ide/ide-io-std.c
@@ -73,6 +73,18 @@ void ide_write_devctl(ide_hwif_t *hwif,
}
EXPORT_SYMBOL_GPL(ide_write_devctl);
+void ide_dev_select(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 select = drive->select | ATA_DEVICE_OBS;
+
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writeb(select, (void __iomem *)hwif->io_ports.device_addr);
+ else
+ outb(select, hwif->io_ports.device_addr);
+}
+EXPORT_SYMBOL_GPL(ide_dev_select);
+
void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
{
ide_hwif_t *hwif = drive->hwif;
@@ -280,6 +292,7 @@ const struct ide_tp_ops default_tp_ops =
.read_altstatus = ide_read_altstatus,
.write_devctl = ide_write_devctl,
+ .dev_select = ide_dev_select,
.tf_load = ide_tf_load,
.tf_read = ide_tf_read,
Index: linux-2.6/drivers/ide/ide-iops.c
===================================================================
--- linux-2.6.orig/drivers/ide/ide-iops.c
+++ linux-2.6/drivers/ide/ide-iops.c
@@ -29,17 +29,7 @@
void SELECT_DRIVE(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- struct ide_cmd cmd;
-
- if (port_ops && port_ops->selectproc)
- port_ops->selectproc(drive);
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf_flags = IDE_TFLAG_OUT_DEVICE;
-
- drive->hwif->tp_ops->tf_load(drive, &cmd);
+ drive->hwif->tp_ops->dev_select(drive);
}
void SELECT_MASK(ide_drive_t *drive, int mask)
Index: linux-2.6/drivers/ide/ns87415.c
===================================================================
--- linux-2.6.orig/drivers/ide/ns87415.c
+++ linux-2.6/drivers/ide/ns87415.c
@@ -182,10 +182,12 @@ static void ns87415_prepare_drive (ide_d
local_irq_restore(flags);
}
-static void ns87415_selectproc (ide_drive_t *drive)
+static void ns87415_dev_select(ide_drive_t *drive)
{
ns87415_prepare_drive(drive,
!!(drive->dev_flags & IDE_DFLAG_USING_DMA));
+
+ outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
}
static void ns87415_dma_start(ide_drive_t *drive)
@@ -229,7 +231,7 @@ static void __devinit init_hwif_ns87415
* Also, leave IRQ masked during drive probing, to prevent infinite
* interrupts from a potentially floating INTA..
*
- * IRQs get unmasked in selectproc when drive is first used.
+ * IRQs get unmasked in dev_select() when drive is first used.
*/
(void) pci_read_config_dword(dev, 0x40, &ctrl);
(void) pci_read_config_byte(dev, 0x09, &progif);
@@ -281,8 +283,18 @@ static void __devinit init_hwif_ns87415
outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
}
-static const struct ide_port_ops ns87415_port_ops = {
- .selectproc = ns87415_selectproc,
+static const struct ide_tp_ops ns87415_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .write_devctl = ide_write_devctl,
+
+ .dev_select = ns87415_dev_select,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = ide_input_data,
+ .output_data = ide_output_data,
};
static const struct ide_dma_ops ns87415_dma_ops = {
@@ -299,7 +311,7 @@ static const struct ide_dma_ops ns87415_
static const struct ide_port_info ns87415_chipset __devinitdata = {
.name = DRV_NAME,
.init_hwif = init_hwif_ns87415,
- .port_ops = &ns87415_port_ops,
+ .tp_ops = &ns87415_tp_ops,
.dma_ops = &ns87415_dma_ops,
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_NO_ATAPI_DMA,
Index: linux-2.6/drivers/ide/pmac.c
===================================================================
--- linux-2.6.orig/drivers/ide/pmac.c
+++ linux-2.6/drivers/ide/pmac.c
@@ -404,8 +404,6 @@ kauai_lookup_timing(struct kauai_timing*
#define IDE_WAKEUP_DELAY (1*HZ)
static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *);
-static void pmac_ide_selectproc(ide_drive_t *drive);
-static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
#define PMAC_IDE_REG(x) \
((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
@@ -415,8 +413,7 @@ static void pmac_ide_kauai_selectproc(id
* timing register when selecting that unit. This version is for
* ASICs with a single timing register
*/
-static void
-pmac_ide_selectproc(ide_drive_t *drive)
+static void pmac_ide_apply_timings(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
@@ -434,8 +431,7 @@ pmac_ide_selectproc(ide_drive_t *drive)
* timing register when selecting that unit. This version is for
* ASICs with a dual timing register (Kauai)
*/
-static void
-pmac_ide_kauai_selectproc(ide_drive_t *drive)
+static void pmac_ide_kauai_apply_timings(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
@@ -464,9 +460,25 @@ pmac_ide_do_update_timings(ide_drive_t *
if (pmif->kind == controller_sh_ata6 ||
pmif->kind == controller_un_ata6 ||
pmif->kind == controller_k2_ata6)
- pmac_ide_kauai_selectproc(drive);
+ pmac_ide_kauai_apply_timings(drive);
else
- pmac_ide_selectproc(drive);
+ pmac_ide_apply_timings(drive);
+}
+
+static void pmac_dev_select(ide_drive_t *drive)
+{
+ pmac_ide_apply_timings(drive);
+
+ writeb(drive->select | ATA_DEVICE_OBS,
+ (void __iomem *)drive->hwif->io_ports.device_addr);
+}
+
+static void pmac_kauai_dev_select(ide_drive_t *drive)
+{
+ pmac_ide_kauai_apply_timings(drive);
+
+ writeb(drive->select | ATA_DEVICE_OBS,
+ (void __iomem *)drive->hwif->io_ports.device_addr);
}
static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
@@ -947,6 +959,7 @@ static const struct ide_tp_ops pmac_tp_o
.read_altstatus = ide_read_altstatus,
.write_devctl = pmac_write_devctl,
+ .dev_select = pmac_dev_select,
.tf_load = ide_tf_load,
.tf_read = ide_tf_read,
@@ -954,19 +967,24 @@ static const struct ide_tp_ops pmac_tp_o
.output_data = ide_output_data,
};
-static const struct ide_port_ops pmac_ide_ata6_port_ops = {
- .init_dev = pmac_ide_init_dev,
- .set_pio_mode = pmac_ide_set_pio_mode,
- .set_dma_mode = pmac_ide_set_dma_mode,
- .selectproc = pmac_ide_kauai_selectproc,
- .cable_detect = pmac_ide_cable_detect,
+static const struct ide_tp_ops pmac_ata6_tp_ops = {
+ .exec_command = pmac_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .write_devctl = pmac_write_devctl,
+
+ .dev_select = pmac_kauai_dev_select,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = ide_input_data,
+ .output_data = ide_output_data,
};
static const struct ide_port_ops pmac_ide_ata4_port_ops = {
.init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
- .selectproc = pmac_ide_selectproc,
.cable_detect = pmac_ide_cable_detect,
};
@@ -974,7 +992,6 @@ static const struct ide_port_ops pmac_id
.init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
- .selectproc = pmac_ide_selectproc,
};
static const struct ide_dma_ops pmac_dma_ops;
@@ -1011,15 +1028,18 @@ static int __devinit pmac_ide_setup_devi
pmif->broken_dma = pmif->broken_dma_warn = 0;
if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
- d.port_ops = &pmac_ide_ata6_port_ops;
+ d.tp_ops = &pmac_ata6_tp_ops;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA6;
} else if (of_device_is_compatible(np, "kauai-ata")) {
pmif->kind = controller_un_ata6;
- d.port_ops = &pmac_ide_ata6_port_ops;
+ d.tp_ops = &pmac_ata6_tp_ops;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA5;
} else if (of_device_is_compatible(np, "K2-UATA")) {
pmif->kind = controller_k2_ata6;
- d.port_ops = &pmac_ide_ata6_port_ops;
+ d.tp_ops = &pmac_ata6_tp_ops;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA5;
} else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0) {
Index: linux-2.6/drivers/ide/qd65xx.c
===================================================================
--- linux-2.6.orig/drivers/ide/qd65xx.c
+++ linux-2.6/drivers/ide/qd65xx.c
@@ -90,13 +90,15 @@ static int timings[4]={-1,-1,-1,-1}; /*
* This routine is invoked to prepare for access to a given drive.
*/
-static void qd65xx_select(ide_drive_t *drive)
+static void qd65xx_dev_select(ide_drive_t *drive)
{
u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) |
(QD_TIMREG(drive) & 0x02);
if (timings[index] != QD_TIMING(drive))
outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive));
+
+ outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
}
/*
@@ -309,20 +311,33 @@ static void __init qd6580_init_dev(ide_d
drive->drive_data = (drive->dn & 1) ? t2 : t1;
}
+static const struct ide_tp_ops qd65xx_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .write_devctl = ide_write_devctl,
+
+ .dev_select = qd65xx_dev_select,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = ide_input_data,
+ .output_data = ide_output_data,
+};
+
static const struct ide_port_ops qd6500_port_ops = {
.init_dev = qd6500_init_dev,
.set_pio_mode = qd6500_set_pio_mode,
- .selectproc = qd65xx_select,
};
static const struct ide_port_ops qd6580_port_ops = {
.init_dev = qd6580_init_dev,
.set_pio_mode = qd6580_set_pio_mode,
- .selectproc = qd65xx_select,
};
static const struct ide_port_info qd65xx_port_info __initdata = {
.name = DRV_NAME,
+ .tp_ops = &qd65xx_tp_ops,
.chipset = ide_qd65xx,
.host_flags = IDE_HFLAG_IO_32BIT |
IDE_HFLAG_NO_DMA,
Index: linux-2.6/drivers/ide/trm290.c
===================================================================
--- linux-2.6.orig/drivers/ide/trm290.c
+++ linux-2.6/drivers/ide/trm290.c
@@ -171,9 +171,11 @@ static void trm290_prepare_drive (ide_dr
local_irq_restore(flags);
}
-static void trm290_selectproc (ide_drive_t *drive)
+static void trm290_dev_select(ide_drive_t *drive)
{
trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
+
+ outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
}
static int trm290_dma_check(ide_drive_t *drive, struct ide_cmd *cmd)
@@ -298,8 +300,18 @@ static void __devinit init_hwif_trm290(i
#endif
}
-static const struct ide_port_ops trm290_port_ops = {
- .selectproc = trm290_selectproc,
+static const struct ide_tp_ops trm290_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .write_devctl = ide_write_devctl,
+
+ .dev_select = trm290_dev_select,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = ide_input_data,
+ .output_data = ide_output_data,
};
static struct ide_dma_ops trm290_dma_ops = {
@@ -315,7 +327,7 @@ static struct ide_dma_ops trm290_dma_ops
static const struct ide_port_info trm290_chipset __devinitdata = {
.name = DRV_NAME,
.init_hwif = init_hwif_trm290,
- .port_ops = &trm290_port_ops,
+ .tp_ops = &trm290_tp_ops,
.dma_ops = &trm290_dma_ops,
.host_flags = IDE_HFLAG_TRM290 |
IDE_HFLAG_NO_ATAPI_DMA |
Index: linux-2.6/drivers/ide/tx4939ide.c
===================================================================
--- linux-2.6.orig/drivers/ide/tx4939ide.c
+++ linux-2.6/drivers/ide/tx4939ide.c
@@ -429,7 +429,7 @@ static void tx4939ide_tf_load_fixup(ide_
* Fix ATA100 CORE System Control Register. (The write to the
* Device/Head register may write wrong data to the System
* Control Register)
- * While Sys_Ctl is written here, selectproc is not needed.
+ * While Sys_Ctl is written here, dev_select() is not needed.
*/
tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl);
}
Index: linux-2.6/include/linux/ide.h
===================================================================
--- linux-2.6.orig/include/linux/ide.h
+++ linux-2.6/include/linux/ide.h
@@ -603,7 +603,7 @@ struct ide_drive_s {
unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
unsigned int cyl; /* "real" number of cyls */
- unsigned int drive_data; /* used by set_pio_mode/selectproc */
+ unsigned int drive_data; /* used by set_pio_mode/dev_select() */
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
@@ -661,6 +661,7 @@ struct ide_tp_ops {
u8 (*read_altstatus)(struct hwif_s *);
void (*write_devctl)(struct hwif_s *, u8);
+ void (*dev_select)(ide_drive_t *);
void (*tf_load)(ide_drive_t *, struct ide_cmd *);
void (*tf_read)(ide_drive_t *, struct ide_cmd *);
@@ -678,7 +679,6 @@ extern const struct ide_tp_ops default_t
* @init_dev: host specific initialization of a device
* @set_pio_mode: routine to program host for PIO mode
* @set_dma_mode: routine to program host for DMA mode
- * @selectproc: tweaks hardware to select drive
* @reset_poll: chipset polling based on hba specifics
* @pre_reset: chipset specific changes to default for device-hba resets
* @resetproc: routine to reset controller after a disk reset
@@ -695,7 +695,6 @@ struct ide_port_ops {
void (*init_dev)(ide_drive_t *);
void (*set_pio_mode)(ide_drive_t *, const u8);
void (*set_dma_mode)(ide_drive_t *, const u8);
- void (*selectproc)(ide_drive_t *);
int (*reset_poll)(ide_drive_t *);
void (*pre_reset)(ide_drive_t *);
void (*resetproc)(ide_drive_t *);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
